LSI L50-501, de formation et d'essai

Est-que vous s'inquiétez encore à passer le test Certification L50-501 qui demande beaucoup d'efforts? Est-que vous travaillez nuit et jour juste pour préparer le test de LSI L50-501? Si vous voulez réussir le test LSI L50-501 plus facilement? N'hésitez plus à nous choisir. Pass4Test vous aidera à réaliser votre rêve.

Le test simulation LSI L50-501 sorti par les experts de Pass4Test est bien proche du test réel. Nous sommes confiant sur notre produit qui vous permet à réussir le test LSI L50-501 à la première fois. Si vous ne passe pas le test, votre argent sera tout rendu.

Si vous faites toujours la lutte contre le test LSI L50-501, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de LSI L50-501. Si vous avez déjà décidé à s'améliorer via LSI L50-501, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.

On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification LSI L50-501. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.

Code d'Examen: L50-501
Nom d'Examen: LSI (LSI SVM5 Implementation Engineer)
Questions et réponses: 119 Q&As

Le Certificat de LSI L50-501 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat LSI L50-501, c'est-à-dire avoir une grande fortune. Le Certificat LSI L50-501 peut bien tester des connaissances professionnelles IT. La Q&A LSI L50-501 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.

Choisir le Pass4Test peut vous aider à réussir 100% le test LSI L50-501 qui change tout le temps. Pass4Test peut vous offrir les infos plus nouvelles. Dans le site de Pass4Test le servie en ligne est disponible toute la journée. Si vous ne passerez pas le test, votre argent sera tout rendu.

L50-501 Démo gratuit à télécharger: http://www.pass4test.fr/L50-501.html

NO.1 What are two requirements to set up a stretched SVM domain across two datacenters on the same
campus? (Choose two.)
A. Both SVM servers must be located on the same site.
B. The sites must be interconnected through two fabrics/ISLs.
C. Each site must have a minimum of one copy of the setup volume.
D. A dedicated IP link must be provided to interconnect the SVM servers.
Answer: B,C

certification LSI   certification L50-501   L50-501   certification L50-501

NO.2 When adding storage to an existing SVM pool, what must be considered?
A. Growing the LUN will provide better utilization of storage.
B. Always pay attention to the performance characteristics of the storage.
C. Always select storage with different storage characteristics.
D. Adding storage to an existing pool will reduce performance.
Answer: B

LSI   L50-501   L50-501 examen   certification L50-501   L50-501   L50-501 examen

NO.3 During the SVM Management software installation, which two adapters would you select to be
controlled by the SVM? (Choose two.)
A. Emulex Fibre Channel adapter
B. Qlogic Fibre Channel adapter
C. Microsoft iSCSI initiator
D. Smart Array controller
Answer: B,C

LSI examen   L50-501   certification L50-501   certification L50-501

NO.4 Which parameter must be the same for SVM servers that manage the same SVM domain?
A. serial number
B. SVM domain name
C. computer name
D. WWNN
Answer: B

LSI   certification L50-501   L50-501   L50-501

NO.5 A customer is running a cluster with cluster nodes and storage on either site and requires synchronous
mirroring across the two sites. You proposed a stretched SVM domain and now you need to configure the
zoning. Which two zoning rules apply to this configuration? (Choose two.)
A. Each DPM must see both storage systems.
B. Each DPM must only see the local storage system.
C. Each cluster node must see both SVM servers.
D. The SVM servers must see each other.
Answer: A,D

LSI   L50-501   L50-501

NO.6 At the end of the SVM installation, which three actions should you perform to ensure that the installation
is correct.? (Choose three.)
A. Test failover between two SVMs to make sure that you can successfully failover between SVMs.
B. Make sure that the SVM recognizes the DPM and that the DPM recognizes all of the devices that are
connected to the DPM ports.
C. Make sure that the SVM and DPM recognize the LUNs available on the storage array.
D. Make sure that the DPMs can communicate with each other.
E. Make sure that the LSI Failover Driver is installed on the SVM server.
Answer: A,B,C

LSI   L50-501   L50-501 examen   L50-501 examen

NO.7 Two SVM servers in SVM Domain A are connected over Fibre Channel with two SVM servers in SVM
Domain B. The SVM servers' HBA at each domain can see the SVM servers' HBA at the other SVM
domain. What should you do to interconnect the SVM domains?
A. An SVM automatically negotiates the connection with the SVMs in other domains over Fibre Channel.
B. SVM domains should not be interconnected.
C. To interconnect two SVM domains, select Tools > Options > General > Configuration > Connect SVM
Domain.
D. To interconnect two SVM domains, select Tools > Options > General > Configuration > Connect FC
Domain.
Answer: A

certification LSI   L50-501   L50-501   certification L50-501   L50-501 examen

NO.8 Where is the SVM metadata stored?
A. On a mirror, between the two SVM internal hard drives.
B. On a mirror, between the managed storage array LUNs and the SVM internal hard drive.
C. On a mirror, between managed storage array LUNs.
D. On a mirror, between the two SVM internal hard drive partitions.
Answer: C

LSI   L50-501 examen   L50-501

NO.9 Which statement describes what should be performed after a DPM image upgrade?
A. The DPM rank must be modified.
B. Set the DPM maximum frame size.
C. The DPM image upgrade does not change the DPM configuration parameters.
D. Configure the DPM ports type and speed.
Answer: C

LSI examen   certification L50-501   L50-501   L50-501 examen

NO.10 A customer wants to create a SVM stripe. Which SVM stripe value should be set?
A. 64 KB
B. 256 KB
C. 512 KB
D. 1 MB
Answer: D

certification LSI   certification L50-501   L50-501

NO.11 What is the difference between the active SVM server and the passive SVM server?
A. The passive SVM server takes control when the active SVM server is too busy.
B. The passive SVM server is a standby server only and does not perform any management tasks.
C. The passive SVM server can only modify objects but cannot create objects.
D. The passive SVM server can only manage user accounts.
Answer: B

LSI examen   certification L50-501   L50-501 examen   L50-501   certification L50-501

NO.12 Your current SAN environment includes a storage system with LUNs exposed directly to Windows hosts.
You have been asked to integrate this storage system into the new SVM domain. Which statement is
correct?
A. The existing data can be moved to an SVM virtual volume while the application is still writing to the
source LUN.
B. The physical LUN containing the data must be unmounted from the host while the data is been moved
to an SVM virtual volume.
C. The physical LUN containing the data must be mounted to the host while the data is been moved to an
SVM virtual volume.
D. The physical LUN containing the data must be mounted to the SVM servers while the data is been
moved to an SVM virtual volume.
Answer: B

certification LSI   L50-501 examen   certification L50-501   L50-501 examen   certification L50-501

NO.13 You have a customer that feels that their application can take advantage of striping their data. Which
two conditions will improve performance? (Choose two.)
A. Striping across two different storage systems.
B. Servers are running a transactional application where I/Os per second are required.
C. Disks that are available for inclusion in the stripe set are not of equal size.
D. Disks that are available for inclusion in the stripe set are of equal size.
Answer: A,D

certification LSI   L50-501   certification L50-501   L50-501 examen   L50-501   L50-501 examen

NO.14 What should you do before starting the SVM server software upgrade process?
A. Reboot the SVM server.
B. Disconnect the SVM Fibre Channel cables.
C. Shut down the SVM Web server.
D. Uninstall the SVM server agent.
Answer: B

LSI examen   L50-501   L50-501

NO.15 Which statement about the SVM server software upgrade is true?
A. The SVM server must be rebooted as part of the software upgrade process.
B. The SVM server must only be rebooted on major versions, e.g 5.1 to 5.2.
C. The SVM server can stay online during the software upgrade.
D. The DPMs must be taken offline during the SVM server reboot.
Answer: A

certification LSI   L50-501 examen   L50-501   L50-501   certification L50-501

Si vous hésitez encore à nous choisir, vous pouvez tout d'abord télécharger le démo gratuit dans le site Pass4Test pour connaître mieux la fiabilité de Pass4Test. Nous avons la confiance à vous promettre que vous allez passer le test LSI L50-501 à la première fois.

Certification LSI de téléchargement gratuit pratique d'examen L50-502, questions et réponses

Si vous hésitez encore à nous choisir, vous pouvez tout d'abord télécharger le démo gratuit dans le site Pass4Test pour connaître mieux la fiabilité de Pass4Test. Nous avons la confiance à vous promettre que vous allez passer le test LSI L50-502 à la première fois.

Le Certificat de LSI L50-502 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat LSI L50-502, c'est-à-dire avoir une grande fortune. Le Certificat LSI L50-502 peut bien tester des connaissances professionnelles IT. La Q&A LSI L50-502 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.

Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test LSI L50-502, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.

Code d'Examen: L50-502
Nom d'Examen: LSI (LSI SVM5 Solutions Architect)
Questions et réponses: 114 Q&As

Pass4Test possède un l'outil de formation particulier à propos de test LSI L50-502. Vous pouvez améliorer les techniques et connaissances professionnelles en coûtant un peu d'argent à courte terme, et vous preuver la professionnalité dans le future proche. L'outil de formation LSI L50-502 offert par Pass4Test est recherché par les experts de Pass4Test en profitant les expériences et les connaissances riches.

L50-502 Démo gratuit à télécharger: http://www.pass4test.fr/L50-502.html

NO.1 Your customer has recently begun using hourly PiTs for rapid application recovery. The desire is to
implement a data retention plan where each hourly PiT is kept on disk until 8:00 PM. Four weeks?worth
the customer would like to keep a daily snapshot copy of the data for seven days. Also the customer
wants to keep four weeks worth of weekly views on a secondary, low cost array. The solution should
minimize disk utilization on the primary array. Which three tasks would you implement to accomplish this
goal? (Choose three.)
A. Create a multiCopy of the application data and keep seven copies.
B. Create a View on the most recent PiT each night at 8:00 PM and retain for seven days.
C. Create a multiCopy of the Sunday View to the second array and keep four copies.
D. Purge PiTs on the source volume at 8:00 PM to keep seven PiTs.
E. Use multiMigrate to move the Sunday View to the second array and keep four copies.
Answer: B,C,D

LSI   L50-502   L50-502

NO.2 Your customer would like to consolidate multiple storage arrays which are currently under-utilized. The
SAN is not currently managed by SVM. The customer desires the minimal impact to their applications.
Which two statements describe the process to consolidate the arrays under SVM? (Choose two.)
A. Import existing LUNs into SVM pools.
B. Use multiMigrate to move the volumes to the desired array.
C. Use asynchronous mirror to move the volumes to the desired array.
D. Use multiMigrate to move the volumes to the desired array and remove SVM.
Answer: A,B

certification LSI   L50-502   L50-502   L50-502 examen   certification L50-502

NO.3 Your customer wants to run backups at any time of the day, using snapshots of production data, leaving
production systems fully online and available during backups. Which SVM application would be used to
achieve their online backup requirement?
A. multiMigrate
B. multiMirror
C. multiView
D. SVM volume management
Answer: C

certification LSI   L50-502   certification L50-502   L50-502   certification L50-502

NO.4 You are trying to determine the optimal solution to meet the data recovery needs of a customer. What
will provide your customer with the smallest recovery time objective and array failure protection?
A. asynchronous multiMirror
B. multiView
C. multiCopy
D. synchronous multiMirror
Answer: D

certification LSI   L50-502 examen   L50-502

NO.5 You have a disaster recovery scenario where newly created SVM Views will be presented to an ESX
server or ESX cluster at a secondary site. To avoid importing the views as new volumes, which ESX
advanced setting should be enabled?
A. port retry
B. resignature
C. device reset
D. LUN reset
Answer: B

LSI   certification L50-502   L50-502 examen   L50-502 examen   L50-502

NO.6 You are implementing zoning for an SVM 5 environment. Which rule should you observe when zoning
servers with DPMs?
A. There should be no more than four paths per DPM to any one server.
B. There should be no more than two paths per DPM to any one server.
C. All servers and DPM front-end ports should reside in the same zone.
D. The servers should be zoned directly with the storage controllers.
Answer: B

LSI examen   L50-502   certification L50-502   L50-502   certification L50-502   L50-502

NO.7 Which storage arrays can be migrated under SVM 5 control.?
A. SAS storage array
B. iSCSI storage array
C. FC storage array
D. Infiniband storage array
Answer: C

LSI   certification L50-502   L50-502 examen   L50-502

NO.8 A financial institution has an Oracle application that is critical to its business. Which three factors will
enable you to assess how to provide high availability and recovery? (Choose three.)
A. application recovery time objective
B. application recovery point objective
C. distance between data centers
D. number of network adapters
E. distance between servers
Answer: A,B,C

LSI examen   L50-502   L50-502   L50-502 examen

NO.9 A retailer with a SQL database must pull statistics from a production database but would like to do so
without interfering with production work. The statistics are required by three different departments. Which
two methods could be used to do this? (Choose two.)
A. Use multiMigrate on the database volume with one job and assign the destination volume to the three
hosts.
B. Use multiMirror asynchronous on the database volume with three jobs and assign the jobs to the three
hosts.
C. Use multiView on the database volume to create a PiT; create three views for that PiT and assign it to
the three hosts.
D. Use multiCopy on the database volume with three jobs and assign each destination volume to the
three hosts.
Answer: C,D

certification LSI   L50-502   L50-502   L50-502   L50-502 examen

NO.10 Your customer is looking for a high availability solution for company-critical data with an RPO of 0.
Periodically the customer would like to verify the integrity of replicated data. You configure two SVM
domains on two sites and use synchronous multiMirror between the two sites. What are two methods to
verify the data? (Choose two.)
A. Create a PiT on the synchronous multiMirror group, create a view on the second synchronous mirror
job PiT and assign it to a host.
B. Use multiCopy for one of the synchronous multiMirror jobs and then assign the destination volume to a
host.
C. Create a PiT on the second synchronous multiMirror job, create a view for that PiT and assign it to a
host.
D. Create a PiT on the first synchronous multiMirror job, create a view for that PiT and assign it to a host.
Answer: A,C

certification LSI   L50-502   L50-502 examen   L50-502 examen

NO.11 You are deploying ESX servers with SVM. You have followed the recommended best practice and
have designed your front-end SAN to have redundant fabrics and allowed for both HBA initiator ports to
see both DPMs. You have created SVM volumes and have presented them to your ESX servers. After
performing an HBA rescan from an ESX server, how many paths should be available to each LUN?
A. 2
B. 4
C. 8
D. 16
Answer: B

LSI   L50-502 examen   L50-502   L50-502   L50-502   L50-502

NO.12 A customer is using SVM to provide five volumes to a Windows 2008 server. These volumes have
been converted to dynamic disks and striped using the OS. Which consideration should be met if the
customer would like to use PiTs and views to access this data from another server?
A. The data cannot be accessed from another host.
B. multiMigrate should be used to migrate the data to a single volume.
C. A consistency group should be defined for the five volumes.
D. The standard agent must be used to access the view.
Answer: C

LSI   L50-502   L50-502   L50-502   L50-502 examen

NO.13 A customer would like to implement SVM into their current storage environment and has asked you to
provide a detailed overview of both the SVM and DPM architectures. Where would you suggest that they
locate the required information?
A. Host Compatibility Matrix
B. Deployment Guide for SVM 4
C. SVM User Guide
D. Configuration Knowledge Base for SVM 5
Answer: C

certification LSI   L50-502 examen   L50-502

NO.14 A customer has an AIX high availability cluster multiprocessing (HACMP) environment and would like to
use SVM to provide additional storage to the cluster. Which consideration must be met to access the new
volumes?
A. The AIX light agent must be installed on all nodes.
B. The new volumes must be imported into a volume group.
C. The LSI failover driver must be installed on all nodes.
D. The MPIO driver must be disabled on all nodes.
Answer: A

LSI examen   L50-502 examen   L50-502

NO.15 A customer has an environment that includes existing VMware disks that must be imported into SVM.
VMware marks a signature on the volumes which identifies the controller WWNN and LUN ID. Which
statement describes what you need to take into account when migrating the VMware disks under SVM
control?
A. VMware will not resignature automatically.
B. VMware will present the same LUN ID after importing.
C. VMware will modify the DPM WWNN to match the array WWNN.
D. VMware resignaturing must be set correctly.
Answer: D

certification LSI   certification L50-502   L50-502   L50-502

Les produits de Pass4Test sont recherchés par les experts de Pass4Test qui se profitent de leurs connaissances et leurs expériences dans l'Idustrie IT. Si vous allez participer le test LSI L50-502, vous devez choisir Pass4Test. La Q&A de Pass4Test peut vous aider à préparer mieux le test LSI L50-502 avec sa grande couiverture des questions. En face d'un test très difficile, vous pouvez obtenir le Certificat LSI L50-502 sans aucune doute.

Certification LSI de téléchargement gratuit pratique d'examen L50-501, questions et réponses

Si vous voulez se prouver une compétition et s'enraciner le statut dans l'industrie IT à travers de test Certification LSI L50-501, c'est obligatoire que vous devez avior les connaissances professionnelles. Mais il demande pas mal de travaux à passer le test Certification LSI L50-501. Peut-être d'obtenir le Certificat LSI L50-501 peut promouvoir le tremplin vers l'Industrie IT, mais vous n'avez pas besoin de travailler autant dur à préparer le test. Vous avez un autre choix à faire toutes les choses plus facile : prendre le produit de Pass4Test comme vos matériaux avec qui vous vous pratiquez avant le test réel. La Q&A de Pass4Test est recherchée particulièrement pour le test IT.

Aujourd'hui, c'est une société pleine de gens talentueux, la meilleure façon de suivre et assurer la place dans votre carrière est de s'améliorer sans arrêt. Si vous n'augmentez pas dans votre carrière, vous êtes juste sous-développé parce que les autres sont meilleurs que vous. Pour éviter ce cas, vous devez vous former successivement.

Selon les anciens test LSI L50-501, la Q&A offerte par Pass4Test est bien liée avec le test réel.

Vous aurez une assurance 100% à réussir le test LSI L50-501 si vous choisissez le produit de Pass4Test. Si malheuresement, vous ne passerez pas le test, votre argent seront tout rendu.

Est-ce que vous vous souciez encore de réussir le test LSI L50-501? Est-ce que vous attendez plus le guide de formation plus nouveaux? Le guide de formation vient de lancer par Pass4Test peut vous donner la solution. Vous pouvez télécharger la partie de guide gratuite pour prendre un essai, et vous allez découvrir que le test n'est pas aussi dur que l'imaginer. Pass4Test vous permet à réussir 100% le test. Votre argent sera tout rendu si vous échouez le test.

Code d'Examen: L50-501
Nom d'Examen: LSI (LSI SVM5 Implementation Engineer)
Questions et réponses: 119 Q&As

L50-501 Démo gratuit à télécharger: http://www.pass4test.fr/L50-501.html

NO.1 During the SVM Management software installation, which two adapters would you select to be
controlled by the SVM? (Choose two.)
A. Emulex Fibre Channel adapter
B. Qlogic Fibre Channel adapter
C. Microsoft iSCSI initiator
D. Smart Array controller
Answer: B,C

LSI examen   L50-501 examen   L50-501

NO.2 Two SVM servers in SVM Domain A are connected over Fibre Channel with two SVM servers in SVM
Domain B. The SVM servers' HBA at each domain can see the SVM servers' HBA at the other SVM
domain. What should you do to interconnect the SVM domains?
A. An SVM automatically negotiates the connection with the SVMs in other domains over Fibre Channel.
B. SVM domains should not be interconnected.
C. To interconnect two SVM domains, select Tools > Options > General > Configuration > Connect SVM
Domain.
D. To interconnect two SVM domains, select Tools > Options > General > Configuration > Connect FC
Domain.
Answer: A

LSI   L50-501   L50-501   certification L50-501

NO.3 You have a customer that feels that their application can take advantage of striping their data. Which
two conditions will improve performance? (Choose two.)
A. Striping across two different storage systems.
B. Servers are running a transactional application where I/Os per second are required.
C. Disks that are available for inclusion in the stripe set are not of equal size.
D. Disks that are available for inclusion in the stripe set are of equal size.
Answer: A,D

certification LSI   L50-501   L50-501

NO.4 Your current SAN environment includes a storage system with LUNs exposed directly to Windows hosts.
You have been asked to integrate this storage system into the new SVM domain. Which statement is
correct?
A. The existing data can be moved to an SVM virtual volume while the application is still writing to the
source LUN.
B. The physical LUN containing the data must be unmounted from the host while the data is been moved
to an SVM virtual volume.
C. The physical LUN containing the data must be mounted to the host while the data is been moved to an
SVM virtual volume.
D. The physical LUN containing the data must be mounted to the SVM servers while the data is been
moved to an SVM virtual volume.
Answer: B

LSI examen   L50-501   L50-501 examen   L50-501 examen   L50-501 examen

NO.5 When adding storage to an existing SVM pool, what must be considered?
A. Growing the LUN will provide better utilization of storage.
B. Always pay attention to the performance characteristics of the storage.
C. Always select storage with different storage characteristics.
D. Adding storage to an existing pool will reduce performance.
Answer: B

LSI   certification L50-501   L50-501

NO.6 What is the difference between the active SVM server and the passive SVM server?
A. The passive SVM server takes control when the active SVM server is too busy.
B. The passive SVM server is a standby server only and does not perform any management tasks.
C. The passive SVM server can only modify objects but cannot create objects.
D. The passive SVM server can only manage user accounts.
Answer: B

LSI examen   L50-501   certification L50-501   L50-501 examen

NO.7 Which statement describes what should be performed after a DPM image upgrade?
A. The DPM rank must be modified.
B. Set the DPM maximum frame size.
C. The DPM image upgrade does not change the DPM configuration parameters.
D. Configure the DPM ports type and speed.
Answer: C

LSI   L50-501 examen   L50-501   certification L50-501   certification L50-501

NO.8 Which parameter must be the same for SVM servers that manage the same SVM domain?
A. serial number
B. SVM domain name
C. computer name
D. WWNN
Answer: B

LSI   L50-501   L50-501 examen   L50-501

NO.9 A customer wants to create a SVM stripe. Which SVM stripe value should be set?
A. 64 KB
B. 256 KB
C. 512 KB
D. 1 MB
Answer: D

LSI   L50-501   L50-501   L50-501 examen

NO.10 At the end of the SVM installation, which three actions should you perform to ensure that the installation
is correct.? (Choose three.)
A. Test failover between two SVMs to make sure that you can successfully failover between SVMs.
B. Make sure that the SVM recognizes the DPM and that the DPM recognizes all of the devices that are
connected to the DPM ports.
C. Make sure that the SVM and DPM recognize the LUNs available on the storage array.
D. Make sure that the DPMs can communicate with each other.
E. Make sure that the LSI Failover Driver is installed on the SVM server.
Answer: A,B,C

certification LSI   certification L50-501   L50-501 examen   L50-501 examen   L50-501

NO.11 What should you do before starting the SVM server software upgrade process?
A. Reboot the SVM server.
B. Disconnect the SVM Fibre Channel cables.
C. Shut down the SVM Web server.
D. Uninstall the SVM server agent.
Answer: B

certification LSI   L50-501   L50-501

NO.12 Which statement about the SVM server software upgrade is true?
A. The SVM server must be rebooted as part of the software upgrade process.
B. The SVM server must only be rebooted on major versions, e.g 5.1 to 5.2.
C. The SVM server can stay online during the software upgrade.
D. The DPMs must be taken offline during the SVM server reboot.
Answer: A

certification LSI   L50-501   L50-501 examen   L50-501

NO.13 What are two requirements to set up a stretched SVM domain across two datacenters on the same
campus? (Choose two.)
A. Both SVM servers must be located on the same site.
B. The sites must be interconnected through two fabrics/ISLs.
C. Each site must have a minimum of one copy of the setup volume.
D. A dedicated IP link must be provided to interconnect the SVM servers.
Answer: B,C

LSI   L50-501 examen   certification L50-501   L50-501

NO.14 A customer is running a cluster with cluster nodes and storage on either site and requires synchronous
mirroring across the two sites. You proposed a stretched SVM domain and now you need to configure the
zoning. Which two zoning rules apply to this configuration? (Choose two.)
A. Each DPM must see both storage systems.
B. Each DPM must only see the local storage system.
C. Each cluster node must see both SVM servers.
D. The SVM servers must see each other.
Answer: A,D

LSI   L50-501   L50-501   certification L50-501   L50-501   L50-501

NO.15 Where is the SVM metadata stored?
A. On a mirror, between the two SVM internal hard drives.
B. On a mirror, between the managed storage array LUNs and the SVM internal hard drive.
C. On a mirror, between managed storage array LUNs.
D. On a mirror, between the two SVM internal hard drive partitions.
Answer: C

LSI examen   L50-501 examen   L50-501   L50-501

L'équipe de Pass4Test se composant des experts dans le domaine IT. Toutes les Q&As sont examinées par nos experts. Les Q&As offertes par Pass4Test sont réputées pour sa grande couverture ( presque 100%) et sa haute précision. Vous pouvez trouver pas mal de sites similaires que Pass4Test, ces sites peut-être peuvent vous offrir aussi les guides d'études ou les services en ligne, mais on doit admettre que Pass4Test peut être la tête de ces nombreux sites. La mise à jour, la grande couverture des questions, la haute précision des réponses nous permettent à augmenter le taux à réussir le test Certification LSI L50-501. Tous les points mentionnés ci-dessus seront une assurance 100% pour votre réussite de test Certification LSI L50-501.

Guide de formation plus récente de LSI L50-503

Si vous hésitez encore à nous choisir, vous pouvez tout d'abord télécharger le démo gratuit dans le site Pass4Test pour connaître mieux la fiabilité de Pass4Test. Nous avons la confiance à vous promettre que vous allez passer le test LSI L50-503 à la première fois.

Pass4Test a capacité d'économiser vos temps et de vous faire plus confiant à réussir le test. Vous pouvez télécharger le démo LSI L50-503 gratuit à connaître mieux la bonne fiabilité de Pass4Test. Nous nous font toujours confiant sur nos produits, et vous aussi dans un temps proche. La réussite de test LSI L50-503 n'est pas loin de vous une fois que vous choisissez le produit de Pass4Test. C'est un choix élégant pour vous faciliter à réussir le test LSI L50-503.

La partie plus nouvelle de test Certification LSI L50-503 est disponible à télécharger gratuitement dans le site de Pass4Test. Les exercices de Pass4Test sont bien proches de test réel LSI L50-503. En comparaison les Q&As dans les autres sites, vous trouverez que les nôtres sont beaucoup plus complets. Les Q&As de Pass4Test sont tout recherchés par les experts de Pass4Test, y compris le test simulation.

La Q&A LSI L50-503 est étudiée par les experts de Pass4Test qui font tous effort en profitant leurs connaissances professionnelles. La Q&A de Pass4Test est ciblée aux candidats de test IT Certification. Vous voyez peut-être les Q&As similaires dansn les autres site web, mais il n'y a que Pass4Test d'avoir le guide d'étude plus complet. C'est le meilleur choix à s'assurer le succès de test Certification LSI L50-503.

Code d'Examen: L50-503
Nom d'Examen: LSI (LSI SVM5 Sales Consultant)
Questions et réponses: 120 Q&As

Participer au test LSI L50-503 est un bon choix, parce que dans l'Industire IT, beaucoup de gens tirent un point de vue que le Certificat LSI L50-503 symbole bien la professionnalité d'un travailleur dans cette industrie.

Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.

L50-503 Démo gratuit à télécharger: http://www.pass4test.fr/L50-503.html

NO.1 A long time customer and SVM prospect just called requesting your help to virtualize their data center
using VMware. What are three ways that SVM's snapshot capabilities will help this customer? (Choose
three.)
A. SVM snapshots will eliminate tape from the customer's environment.
B. SVM makes it possible to keep the point-in-time snapshots online for extended periods of time and to
recover from them quickly.
C. SVM snapshots can eliminate the need to install backup agents on every virtual machine.
D. SVM snapshots will protect from physical failures.
E. SVM snapshots can be used to reduce time required to stage, test, and debug software applications.
Answer: B,C,E

LSI   L50-503 examen   L50-503   L50-503 examen

NO.2 What are two ways that SVM supports consolidation? (Choose two.)
A. SVM can reserve space for future use on a LUN-by-LUN basis.
B. SVM can build RAID structures for enhanced data protection.
C. SVM can migrate data from multiple storage arrays onto a single storage array.
D. SVM can make snapshots of volume groups that are spread across multiple storage arrays.
Answer: C,D

LSI   L50-503 examen   L50-503   L50-503   L50-503 examen

NO.3 Why would a customer use thin provisioning to manage their storage?
A. to provision more physical capacity to a LUN than is actually needed
B. to cluster LUNs of similar type into one management entity
C. to add more volumes to a management domain than are supported by hardware
D. to create large virtual volumes based on a small amount of physical capacity
Answer: D

LSI   certification L50-503   L50-503

NO.4 Your client is concerned about disaster recovery. You are explaining that SVM can recover from both
physical and logical failures positioning the fact that the majority of failures are actually logical. What
would be a good example for your client?
A. file deletion
B. hardware failure
C. loss of a site due to a disaster
D. split-path architecture
Answer: A

certification LSI   L50-503   L50-503

NO.5 Which statement describes tiered storage?
A. An infrastructure designed to lower the overall cost of storage by placing volumes on "fit for purpose"
storage based on defined cost, availability, and performance requirements.
B. An infrastructure designed to place data on the storage devices that have the lowest price per
megabyte ratio.
C. An infrastructure designed to place data on different storage devices to ensure a heterogeneous
model.
D. An infrastructure designed to place data on different storage devices to ensure a homogeneous model.
Answer: A

LSI   L50-503   L50-503 examen   certification L50-503   L50-503

NO.6 Your customer calls to discuss their DPMs and their consolidation project's impact on their DPM port
count. They are moving from a pair of dual controllers with four ports to one dual controller with eight ports.
Which statement accurately describes what they should do.?
A. They will need four more ports on each DPM.
B. They will need four fewer ports on each DPM.
C. They will need eight more ports on each DPM.
D. They will not need to change their DPM port count.
Answer: D

certification LSI   L50-503 examen   L50-503   L50-503

NO.7 In an IT center with several different vendors storage arrays, virtualized networked storage with SVM
provides migration of data to less expensive tiers of storage by doing what?
A. Pooling the storage into a server virtualization model whereby different servers can emulate hosts and
tier the data.
B. Pooling the storage into a networked virtualization model zoning the virtualized storage utilizing
third-party tools.
C. Pooling the storage across different vendors?storage arrays into a centralized pool and then assigning
different applications and tiers to different pools.
D. Pooling the storage across different vendors?storage arrays into assigned volume groups and use
virtual servers to tier the data.
Answer: C

LSI   certification L50-503   L50-503   L50-503   L50-503

NO.8 What is an advantage of using thin provisioning over traditional capacity provisioning?
A. A thin volume serves up only the data blocks called for by a read or write request.
B. A thin volume automatically provisions additional capacity for large I/O read requests.
C. A thin volume holds only the changes (writes) made by hosts to the thin volume.
D. A thin volume migrates data from an existing LUN into a new pool.
Answer: C

certification LSI   L50-503   L50-503   L50-503   L50-503 examen

NO.9 Your SVM customer calls with questions about performance tuning in their VMware environment. One
of their storage arrays is not running fast enough to support the application for several days each month.
What would you recommend?
A. Buy a faster storage array and move the data with multiView.
B. Use multiCopy to copy the data to a different storage tier, stop the application and remount the data to
the copy.
C. Back up the data off a snapshot and restore it to a faster array.
D. Use multiMigrate to move the application's data to a higher performing storage tier for the busy days.
Answer: D

certification LSI   L50-503   L50-503 examen   L50-503

NO.10 What are two recommended ways of organizing pools? (Choose two.)
A. by host
B. by RAID level
C. by DPM
D. by users
Answer: B,D

LSI   certification L50-503   L50-503 examen   L50-503 examen   certification L50-503

NO.11 A warehousing company is in the process of a changeover to a new supplier thus switching out their
inventory. During this changeover, the business requires the highest performance of the inventory
database application. This database currently resides on Tier 3 storage. The customer's Tier 1 storage
has 15000 RPM Fibre Channel drives while the Tier 3 storage has 7200 RPM SATA drives. What is the
SVM solution for this customer?
A. Use the multi-pathing architecture to zone the host dedicated to the Tier 1 storage and zone a separate
host dedicated to Tier 3.
B. Non-disruptively promote the volumes from the Tier 3 storage to the Tier 1 storage before the
changeover and demote the volumes back to Tier 3 when the changeover is complete.
C. Define data policies which will automatically migrate data to Tier 1 and Tier 3 storage levels providing
instant tiering.
D. Non-disruptively place all of the 15000 RPM drives in one array and all of the 7200 RPM drives in
another array thus automatically tiering your storage to different workloads.
Answer: B

LSI   L50-503 examen   L50-503 examen   L50-503

NO.12 What are two functions of the Data Path Module? (Choose two.)
A. DPM processes control frames.
B. DPM processes data frames.
C. DPM manages metadata.
D. DPM translates addresses.
Answer: B,D

LSI   certification L50-503   L50-503   certification L50-503

NO.13 When consolidating onto a new storage platform, what actually moves the data?
A. the Data Path Module
B. the SVM server
C. the storage array
D. the SAN switch
Answer: B

certification LSI   L50-503   L50-503 examen   L50-503   L50-503   L50-503

NO.14 What are three functions of the SVM server? (Choose three.)
A. The SVM server processes control frames.
B. The SVM server processes data frames.
C. The SVM server manages metadata.
D. The SVM server translates addresses.
E. The SVM server moves data.
Answer: A,C,E

LSI examen   L50-503   certification L50-503   L50-503   L50-503

NO.15 How can SVM's centralized management provide better performance?
A. by allocating capacity across RAID arrays
B. by striping volumes across RAID arrays
C. by mirroring volumes across RAID arrays
D. by provisioning additional servers
Answer: B

certification LSI   L50-503   L50-503

NO.16 What are three benefits of using thin provisioning? (Choose three.)
A. reclaiming trapped capacity
B. creating empty volumes to reserve capacity
C. expanding volume capacity automatically
D. making multiple copies of volumes for backups
E. saving money on overall storage costs
Answer: A,C,E

certification LSI   L50-503 examen   L50-503 examen   L50-503   L50-503 examen

NO.17 A long time customer just called requesting your help justifying SVM as they virtualize their data center
using VMware. What are three reasons SVM's storage services would benefit this customer? (Choose
three.)
A. Rapid application recovery is easier with SVM's snapshot capabilities.
B. SVM will make provisioning easy and fast.
C. Disaster recovery will be less expensive than using traditional methods.
D. SVM will eliminate the need for tape.
E. SVM will automatically size storage to fit the data.
Answer: A,B,C

certification LSI   L50-503   L50-503 examen   L50-503 examen   L50-503 examen   L50-503

NO.18 When moving existing LUNs into a pool, which feature would you use?
A. SVM multiCopy
B. SVM multiMirror
C. SVM multiView
D. SVM disk import
Answer: D

certification LSI   L50-503 examen   L50-503

NO.19 An SVM prospect just called requesting that you virtualize their data center using VMware. What are
three ways that SVM's volume management capabilities will help this customer? (Choose three.)
A. SVM allows users to quickly and efficiently create and manage volumes for each of the virtual
machines.
B. SVM eliminates the need to deal with ongoing LUN management at the array level.
C. SVM will prevent the virtual servers from running out of space.
D. SVM allows storage be provisioned and reallocated after use with the same simplicity as the virtual
servers.
E. SVM will size the volumes to the actual data size.
Answer: A,B,D

certification LSI   certification L50-503   L50-503

NO.20 Your customer calls to discuss their SVM servers and their consolidation project's impact on their SVM
server port count. They are moving from a pair of dual controllers with four ports to one dual controller with
eight ports. Which statement accurately describes what the impact will be?
A. They will need four more ports on each SVM server.
B. They will need four fewer ports on each SVM server.
C. They cannot change the SVM server's port count.
D. They will need eight more ports on each SVM server.
Answer: C

LSI   L50-503 examen   L50-503   L50-503   certification L50-503

Le test LSI L50-503 est populaire dans l'Industrie IT. Il y a beaucoup de professionnels IT veulent ce passport de IT. Votre vie et salaire sera améliorée avec ce Certificat. Vous aurez une meilleure assurance.

Le matériel de formation de l'examen de meilleur LSI L50-501

Le test LSI L50-501 peut bien examnier les connaissances et techniques professionnelles. Pass4Test est votre raccourci amené au succès de test LSI L50-501. Chez Pass4Test, vous n'avez pas besoin de dépenser trop de temps et d'argent juste pour préparer le test LSI L50-501. Travaillez avec l'outil formation de Pass4Test visé au test, il ne vous demande que 20 heures à préparer.

Le test LSI L50-501 est le premier pas pour promouvoir dans l'Industrie IT, mais aussi la seule rue ramenée au pic de succès. Le test LSI L50-501 joue un rôle très important dans cette industrie. Et aussi, Pass4Test est un chaînon inevitable pour réussir le test sans aucune doute.

Pass4Test est un site à offrir particulièrement la Q&A LSI L50-501, vous pouvez non seulement aprrendre plus de connaissances professionnelles, et encore obtenir le Passport de Certification LSI L50-501, et trouver un meilleur travail plus tard. Les documentations offertes par Pass4Test sont tout étudiés par les experts de Pass4Test en profitant leurs connaissances et expériences, ces Q&As sont impresionnées par une bonne qualité. Il ne faut que choisir Pass4Test, vous pouvez non seulement passer le test LSI L50-501 et même se renforcer vos connaissances professionnelles IT.

Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test LSI L50-501.

Code d'Examen: L50-501
Nom d'Examen: LSI (LSI SVM5 Implementation Engineer)
Questions et réponses: 119 Q&As

Bien qu'Il y ait plein de talentueux dans cette société, il manque beaucoup de professionnels dans les domaine en cours de développement, l'Industrie IT est l'un de ces domaines. Donc le test LSI L50-501 est un bon l'examination de technique informatique. Pass4Test est un site d'offrir la formation particulière au test LSI L50-501.

Peut-être vous voyez les guides d'études similaires pour le test LSI L50-501, mais nous avons la confiance que vous allez nous choisir finalement grâce à notre gravité d'état dans cette industrie et notre profession. Pass4Test se contribue à amérioler votre carrière. Vous saurez que vous êtes bien préparé à passer le test LSI L50-501 lorsque vous choisissez la Q&A de Pass4Test. De plus, un an de service gratuit en ligne après vendre est aussi disponible pour vous.

Pass4Test est un bon catalyseur du succès pour les professionnels IT. Beaucoup de gens passer le test LSI L50-501 avec l'aide de l'outil formation. Les experts profitent leurs expériences riches et connaissances à faire sortir la Q&A LSI L50-501 plus nouvelle qui comprend les exercices de pratiquer et le test simulation. Vous pouvez passer le test LSI L50-501 plus facilement avec la Q&A de Pass4Test.

L50-501 Démo gratuit à télécharger: http://www.pass4test.fr/L50-501.html

NO.1 Where is the SVM metadata stored?
A. On a mirror, between the two SVM internal hard drives.
B. On a mirror, between the managed storage array LUNs and the SVM internal hard drive.
C. On a mirror, between managed storage array LUNs.
D. On a mirror, between the two SVM internal hard drive partitions.
Answer: C

LSI   L50-501 examen   L50-501   certification L50-501   L50-501

NO.2 At the end of the SVM installation, which three actions should you perform to ensure that the installation
is correct.? (Choose three.)
A. Test failover between two SVMs to make sure that you can successfully failover between SVMs.
B. Make sure that the SVM recognizes the DPM and that the DPM recognizes all of the devices that are
connected to the DPM ports.
C. Make sure that the SVM and DPM recognize the LUNs available on the storage array.
D. Make sure that the DPMs can communicate with each other.
E. Make sure that the LSI Failover Driver is installed on the SVM server.
Answer: A,B,C

LSI   L50-501   certification L50-501   L50-501   L50-501   L50-501 examen

NO.3 Which statement describes what should be performed after a DPM image upgrade?
A. The DPM rank must be modified.
B. Set the DPM maximum frame size.
C. The DPM image upgrade does not change the DPM configuration parameters.
D. Configure the DPM ports type and speed.
Answer: C

certification LSI   L50-501   L50-501   certification L50-501   L50-501

NO.4 You have a customer that feels that their application can take advantage of striping their data. Which
two conditions will improve performance? (Choose two.)
A. Striping across two different storage systems.
B. Servers are running a transactional application where I/Os per second are required.
C. Disks that are available for inclusion in the stripe set are not of equal size.
D. Disks that are available for inclusion in the stripe set are of equal size.
Answer: A,D

certification LSI   certification L50-501   L50-501   L50-501   L50-501

NO.5 Your current SAN environment includes a storage system with LUNs exposed directly to Windows hosts.
You have been asked to integrate this storage system into the new SVM domain. Which statement is
correct?
A. The existing data can be moved to an SVM virtual volume while the application is still writing to the
source LUN.
B. The physical LUN containing the data must be unmounted from the host while the data is been moved
to an SVM virtual volume.
C. The physical LUN containing the data must be mounted to the host while the data is been moved to an
SVM virtual volume.
D. The physical LUN containing the data must be mounted to the SVM servers while the data is been
moved to an SVM virtual volume.
Answer: B

LSI examen   L50-501 examen   L50-501 examen   L50-501 examen

NO.6 A customer wants to create a SVM stripe. Which SVM stripe value should be set?
A. 64 KB
B. 256 KB
C. 512 KB
D. 1 MB
Answer: D

certification LSI   certification L50-501   certification L50-501   L50-501   L50-501   certification L50-501

NO.7 What is the difference between the active SVM server and the passive SVM server?
A. The passive SVM server takes control when the active SVM server is too busy.
B. The passive SVM server is a standby server only and does not perform any management tasks.
C. The passive SVM server can only modify objects but cannot create objects.
D. The passive SVM server can only manage user accounts.
Answer: B

LSI   certification L50-501   L50-501   L50-501   L50-501 examen

NO.8 During the SVM Management software installation, which two adapters would you select to be
controlled by the SVM? (Choose two.)
A. Emulex Fibre Channel adapter
B. Qlogic Fibre Channel adapter
C. Microsoft iSCSI initiator
D. Smart Array controller
Answer: B,C

certification LSI   L50-501   certification L50-501   L50-501 examen

NO.9 Two SVM servers in SVM Domain A are connected over Fibre Channel with two SVM servers in SVM
Domain B. The SVM servers' HBA at each domain can see the SVM servers' HBA at the other SVM
domain. What should you do to interconnect the SVM domains?
A. An SVM automatically negotiates the connection with the SVMs in other domains over Fibre Channel.
B. SVM domains should not be interconnected.
C. To interconnect two SVM domains, select Tools > Options > General > Configuration > Connect SVM
Domain.
D. To interconnect two SVM domains, select Tools > Options > General > Configuration > Connect FC
Domain.
Answer: A

LSI   L50-501 examen   L50-501 examen   L50-501 examen

NO.10 When adding storage to an existing SVM pool, what must be considered?
A. Growing the LUN will provide better utilization of storage.
B. Always pay attention to the performance characteristics of the storage.
C. Always select storage with different storage characteristics.
D. Adding storage to an existing pool will reduce performance.
Answer: B

LSI   L50-501   L50-501   L50-501   certification L50-501   L50-501

NO.11 What should you do before starting the SVM server software upgrade process?
A. Reboot the SVM server.
B. Disconnect the SVM Fibre Channel cables.
C. Shut down the SVM Web server.
D. Uninstall the SVM server agent.
Answer: B

LSI   certification L50-501   L50-501   L50-501   L50-501 examen

NO.12 Which parameter must be the same for SVM servers that manage the same SVM domain?
A. serial number
B. SVM domain name
C. computer name
D. WWNN
Answer: B

LSI   L50-501   L50-501 examen   L50-501

NO.13 What are two requirements to set up a stretched SVM domain across two datacenters on the same
campus? (Choose two.)
A. Both SVM servers must be located on the same site.
B. The sites must be interconnected through two fabrics/ISLs.
C. Each site must have a minimum of one copy of the setup volume.
D. A dedicated IP link must be provided to interconnect the SVM servers.
Answer: B,C

LSI   L50-501   L50-501   certification L50-501

NO.14 Which statement about the SVM server software upgrade is true?
A. The SVM server must be rebooted as part of the software upgrade process.
B. The SVM server must only be rebooted on major versions, e.g 5.1 to 5.2.
C. The SVM server can stay online during the software upgrade.
D. The DPMs must be taken offline during the SVM server reboot.
Answer: A

LSI examen   L50-501   L50-501   L50-501

NO.15 A customer is running a cluster with cluster nodes and storage on either site and requires synchronous
mirroring across the two sites. You proposed a stretched SVM domain and now you need to configure the
zoning. Which two zoning rules apply to this configuration? (Choose two.)
A. Each DPM must see both storage systems.
B. Each DPM must only see the local storage system.
C. Each cluster node must see both SVM servers.
D. The SVM servers must see each other.
Answer: A,D

certification LSI   L50-501   L50-501

Il y a plusieurs de façons pour réussir le test LSI L50-501, vous pouvez travailler dur et dépenser beaucoup d'argents, ou vous pouvez travailler plus efficacement avec moins temps dépensés.

LSI meilleur examen L50-501, questions et réponses

Pass4Test, où vous pouvez trouver les conseils et les documentations de test Certification LSI L50-501, est un siteweb remarquable offrant les données à préparer le test IT. Les documentations partiels et les mis en nouveau sont offerts gratuitement dans le site de Pass4Test. D'ailleurs, nos experts profitent de leurs expériences et leurs efforts à lancer sans arrêts les Q&A plus proches au test réel. Vous allez passer votre examen plus facile.

Les produits de Pass4Test sont préparés pour le test Certification LSI L50-501, y compris les formations et les informations ciblées au test LSI L50-501. D'ailleurs, la Q&A de Pass4Test qui est impressionnée par la grande couverture des questions et la haute précision des réponses vous permet à réussir le test avec une haute note.

Les experts de Pass4Test ont fait sortir un nouveau guide d'étude de Certification LSI L50-501, avec ce guide d'étude, réussir ce test a devenu une chose pas difficile. Pass4Test vous permet à réussir 100% le test LSI L50-501 à la première fois. Les questions et réponses vont apparaître dans le test réel. Pass4Test peut vous donner une Q&A plus complète une fois que vous choisissez nous. D'ailleurs, la mise à jour gratuite pendant un an est aussi disponible pour vous.

Vous pouvez comparer un peu les Q&As dans les autres sites web que lesquelles de Pass4Test, c'est pas difficile à trouver que la Q&A LSI L50-501 est plus complète. Vous pouvez télécharger le démo gratuit à prendre un essai de la qualité de Pass4Test. La raison de la grande couverture des questions et la haute qualité des réponses vient de l'expérience riche et la connaissances professionnelles des experts de Pass4Test. La nouvelle Q&A de LSI L50-501 lancée par l'équipe de Pass4Test sont bien populaire par les candidats.

Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification LSI L50-501. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.

Code d'Examen: L50-501

Nom d'Examen: LSI (LSI SVM5 Implementation Engineer)

Questions et réponses: 119 Q&As

L50-501 Démo gratuit à télécharger: http://www.pass4test.fr/L50-501.html

NO.1 You have a customer that feels that their application can take advantage of striping their data. Which
two conditions will improve performance? (Choose two.)
A. Striping across two different storage systems.
B. Servers are running a transactional application where I/Os per second are required.
C. Disks that are available for inclusion in the stripe set are not of equal size.
D. Disks that are available for inclusion in the stripe set are of equal size.
Answer: A,D

certification LSI   L50-501 examen   L50-501 examen

NO.2 Which statement about the SVM server software upgrade is true?
A. The SVM server must be rebooted as part of the software upgrade process.
B. The SVM server must only be rebooted on major versions, e.g 5.1 to 5.2.
C. The SVM server can stay online during the software upgrade.
D. The DPMs must be taken offline during the SVM server reboot.
Answer: A

LSI   L50-501 examen   L50-501

NO.3 Which statement describes what should be performed after a DPM image upgrade?
A. The DPM rank must be modified.
B. Set the DPM maximum frame size.
C. The DPM image upgrade does not change the DPM configuration parameters.
D. Configure the DPM ports type and speed.
Answer: C

certification LSI   L50-501 examen   L50-501 examen   L50-501 examen   L50-501

NO.4 What should you do before starting the SVM server software upgrade process?
A. Reboot the SVM server.
B. Disconnect the SVM Fibre Channel cables.
C. Shut down the SVM Web server.
D. Uninstall the SVM server agent.
Answer: B

LSI examen   L50-501   L50-501 examen

NO.5 Which parameter must be the same for SVM servers that manage the same SVM domain?
A. serial number
B. SVM domain name
C. computer name
D. WWNN
Answer: B

LSI   L50-501   L50-501   L50-501 examen   certification L50-501

NO.6 What are two requirements to set up a stretched SVM domain across two datacenters on the same
campus? (Choose two.)
A. Both SVM servers must be located on the same site.
B. The sites must be interconnected through two fabrics/ISLs.
C. Each site must have a minimum of one copy of the setup volume.
D. A dedicated IP link must be provided to interconnect the SVM servers.
Answer: B,C

LSI examen   L50-501 examen   L50-501

NO.7 Your current SAN environment includes a storage system with LUNs exposed directly to Windows hosts.
You have been asked to integrate this storage system into the new SVM domain. Which statement is
correct?
A. The existing data can be moved to an SVM virtual volume while the application is still writing to the
source LUN.
B. The physical LUN containing the data must be unmounted from the host while the data is been moved
to an SVM virtual volume.
C. The physical LUN containing the data must be mounted to the host while the data is been moved to an
SVM virtual volume.
D. The physical LUN containing the data must be mounted to the SVM servers while the data is been
moved to an SVM virtual volume.
Answer: B

LSI   L50-501   L50-501

NO.8 Two SVM servers in SVM Domain A are connected over Fibre Channel with two SVM servers in SVM
Domain B. The SVM servers' HBA at each domain can see the SVM servers' HBA at the other SVM
domain. What should you do to interconnect the SVM domains?
A. An SVM automatically negotiates the connection with the SVMs in other domains over Fibre Channel.
B. SVM domains should not be interconnected.
C. To interconnect two SVM domains, select Tools > Options > General > Configuration > Connect SVM
Domain.
D. To interconnect two SVM domains, select Tools > Options > General > Configuration > Connect FC
Domain.
Answer: A

certification LSI   L50-501 examen   L50-501 examen   certification L50-501

NO.9 What is the difference between the active SVM server and the passive SVM server?
A. The passive SVM server takes control when the active SVM server is too busy.
B. The passive SVM server is a standby server only and does not perform any management tasks.
C. The passive SVM server can only modify objects but cannot create objects.
D. The passive SVM server can only manage user accounts.
Answer: B

LSI   certification L50-501   certification L50-501

NO.10 At the end of the SVM installation, which three actions should you perform to ensure that the installation
is correct.? (Choose three.)
A. Test failover between two SVMs to make sure that you can successfully failover between SVMs.
B. Make sure that the SVM recognizes the DPM and that the DPM recognizes all of the devices that are
connected to the DPM ports.
C. Make sure that the SVM and DPM recognize the LUNs available on the storage array.
D. Make sure that the DPMs can communicate with each other.
E. Make sure that the LSI Failover Driver is installed on the SVM server.
Answer: A,B,C

LSI   L50-501   L50-501   L50-501 examen   L50-501   L50-501

NO.11 A customer wants to create a SVM stripe. Which SVM stripe value should be set?
A. 64 KB
B. 256 KB
C. 512 KB
D. 1 MB
Answer: D

LSI examen   certification L50-501   L50-501 examen

NO.12 Where is the SVM metadata stored?
A. On a mirror, between the two SVM internal hard drives.
B. On a mirror, between the managed storage array LUNs and the SVM internal hard drive.
C. On a mirror, between managed storage array LUNs.
D. On a mirror, between the two SVM internal hard drive partitions.
Answer: C

certification LSI   L50-501 examen   L50-501 examen   L50-501   L50-501 examen

NO.13 A customer is running a cluster with cluster nodes and storage on either site and requires synchronous
mirroring across the two sites. You proposed a stretched SVM domain and now you need to configure the
zoning. Which two zoning rules apply to this configuration? (Choose two.)
A. Each DPM must see both storage systems.
B. Each DPM must only see the local storage system.
C. Each cluster node must see both SVM servers.
D. The SVM servers must see each other.
Answer: A,D

LSI examen   L50-501   L50-501   L50-501   L50-501

NO.14 During the SVM Management software installation, which two adapters would you select to be
controlled by the SVM? (Choose two.)
A. Emulex Fibre Channel adapter
B. Qlogic Fibre Channel adapter
C. Microsoft iSCSI initiator
D. Smart Array controller
Answer: B,C

LSI   L50-501   L50-501

NO.15 When adding storage to an existing SVM pool, what must be considered?
A. Growing the LUN will provide better utilization of storage.
B. Always pay attention to the performance characteristics of the storage.
C. Always select storage with different storage characteristics.
D. Adding storage to an existing pool will reduce performance.
Answer: B

LSI   L50-501   certification L50-501

Selon les feedbacks les professionnels bien réputés dans l'Industrie IT, Pass4Test est un bon catalyseur de leurs succès. L'outil de formation offert par Pass4Test leur aide d'économiser le temps et l'argent, le plus important est qu'ils aient passé le test LSI L50-501 avec succès. Pass4Test est un fournissur fiable. Vous allez réaliser votre rêve avec l'aide de Pass4Test.

Pass4Test offre une formation sur LSI L50-502 matériaux examen

Pass4Test vous promet de vous aider à passer le test LSI L50-502, vous pouvez télécharger maintenant les Q&As partielles de test LSI L50-502 en ligne. Il y a encore la mise à jour gratuite pendant un an pour vous. Si vous malheureusement rater le test, votre argent sera 100% rendu.

Pass4Test est un bon site qui provide la façon efficace à se former à court terme pour réussir le test LSI L50-502, c'est un certificat qui peut améliorer le niveau de vie. Les gens avec le Certificat gagent beaucoup plus que les gens sans Certificat LSI L50-502. Vous aurez une space plus grande à se développer.

Si vous vous inscriez le test LSI L50-502, vous devez choisir une bonne Q&A. Le test LSI L50-502 est un test Certification très important dans l'Industrie IT. C'est essentielle d'une bonne préparation avant le test.

Si vous voulez ne se soucier plus à passer le test LSI L50-502, donc vous devez prendre la Q&A de Pass4Test comme le guide d'étude pendant la préparation de test LSI L50-502. C'est une bonne affaire parce que un petit invertissement peut vous rendre beaucoup. Utiliser la Q&A LSI L50-502 offerte par Pass4Test peut vous assurer à réussir le test 100%. Pass4Test a toujours une bonne réputation dans l'Industrie IT.

Beaucoup de travailleurs espèrent obtenir quelques Certificat IT pour avoir une plus grande space de s'améliorer. Certains certificats peut vous aider à réaliser ce rêve. Le test LSI L50-502 est un certificat comme ça. Mais il est difficile à réussir. Il y a plusieurs façons pour se préparer, vous pouvez dépenser plein de temps et d'effort, ou vous pouvez choisir une bonne formation en Internet. Pass4Test est un bon fournisseur de l'outil formation de vous aider à atteindre votre but. Selons vos connaissances à propos de Pass4Test, vous allez faire un bon choix de votre formation.

Code d'Examen: L50-502

Nom d'Examen: LSI (LSI SVM5 Solutions Architect)

Questions et réponses: 114 Q&As

L50-502 Démo gratuit à télécharger: http://www.pass4test.fr/L50-502.html

NO.1 A customer would like to implement SVM into their current storage environment and has asked you to
provide a detailed overview of both the SVM and DPM architectures. Where would you suggest that they
locate the required information?
A. Host Compatibility Matrix
B. Deployment Guide for SVM 4
C. SVM User Guide
D. Configuration Knowledge Base for SVM 5
Answer: C

LSI   certification L50-502   L50-502   L50-502

NO.2 Your customer has recently begun using hourly PiTs for rapid application recovery. The desire is to
implement a data retention plan where each hourly PiT is kept on disk until 8:00 PM. Four weeks?worth
the customer would like to keep a daily snapshot copy of the data for seven days. Also the customer
wants to keep four weeks worth of weekly views on a secondary, low cost array. The solution should
minimize disk utilization on the primary array. Which three tasks would you implement to accomplish this
goal? (Choose three.)
A. Create a multiCopy of the application data and keep seven copies.
B. Create a View on the most recent PiT each night at 8:00 PM and retain for seven days.
C. Create a multiCopy of the Sunday View to the second array and keep four copies.
D. Purge PiTs on the source volume at 8:00 PM to keep seven PiTs.
E. Use multiMigrate to move the Sunday View to the second array and keep four copies.
Answer: B,C,D

LSI   L50-502   L50-502

NO.3 A customer has an AIX high availability cluster multiprocessing (HACMP) environment and would like to
use SVM to provide additional storage to the cluster. Which consideration must be met to access the new
volumes?
A. The AIX light agent must be installed on all nodes.
B. The new volumes must be imported into a volume group.
C. The LSI failover driver must be installed on all nodes.
D. The MPIO driver must be disabled on all nodes.
Answer: A

LSI   L50-502   L50-502   L50-502   L50-502   L50-502 examen

NO.4 You are deploying ESX servers with SVM. You have followed the recommended best practice and
have designed your front-end SAN to have redundant fabrics and allowed for both HBA initiator ports to
see both DPMs. You have created SVM volumes and have presented them to your ESX servers. After
performing an HBA rescan from an ESX server, how many paths should be available to each LUN?
A. 2
B. 4
C. 8
D. 16
Answer: B

LSI examen   L50-502   L50-502

NO.5 A financial institution has an Oracle application that is critical to its business. Which three factors will
enable you to assess how to provide high availability and recovery? (Choose three.)
A. application recovery time objective
B. application recovery point objective
C. distance between data centers
D. number of network adapters
E. distance between servers
Answer: A,B,C

LSI   certification L50-502   L50-502   L50-502

NO.6 Which storage arrays can be migrated under SVM 5 control.?
A. SAS storage array
B. iSCSI storage array
C. FC storage array
D. Infiniband storage array
Answer: C

LSI examen   L50-502 examen   L50-502 examen

NO.7 A customer is using SVM to provide five volumes to a Windows 2008 server. These volumes have
been converted to dynamic disks and striped using the OS. Which consideration should be met if the
customer would like to use PiTs and views to access this data from another server?
A. The data cannot be accessed from another host.
B. multiMigrate should be used to migrate the data to a single volume.
C. A consistency group should be defined for the five volumes.
D. The standard agent must be used to access the view.
Answer: C

LSI   L50-502 examen   L50-502 examen   L50-502   certification L50-502

NO.8 You have a disaster recovery scenario where newly created SVM Views will be presented to an ESX
server or ESX cluster at a secondary site. To avoid importing the views as new volumes, which ESX
advanced setting should be enabled?
A. port retry
B. resignature
C. device reset
D. LUN reset
Answer: B

LSI examen   certification L50-502   L50-502

NO.9 Your customer wants to run backups at any time of the day, using snapshots of production data, leaving
production systems fully online and available during backups. Which SVM application would be used to
achieve their online backup requirement?
A. multiMigrate
B. multiMirror
C. multiView
D. SVM volume management
Answer: C

certification LSI   L50-502   L50-502

NO.10 Your customer is looking for a high availability solution for company-critical data with an RPO of 0.
Periodically the customer would like to verify the integrity of replicated data. You configure two SVM
domains on two sites and use synchronous multiMirror between the two sites. What are two methods to
verify the data? (Choose two.)
A. Create a PiT on the synchronous multiMirror group, create a view on the second synchronous mirror
job PiT and assign it to a host.
B. Use multiCopy for one of the synchronous multiMirror jobs and then assign the destination volume to a
host.
C. Create a PiT on the second synchronous multiMirror job, create a view for that PiT and assign it to a
host.
D. Create a PiT on the first synchronous multiMirror job, create a view for that PiT and assign it to a host.
Answer: A,C

LSI   L50-502   certification L50-502   certification L50-502

NO.11 A retailer with a SQL database must pull statistics from a production database but would like to do so
without interfering with production work. The statistics are required by three different departments. Which
two methods could be used to do this? (Choose two.)
A. Use multiMigrate on the database volume with one job and assign the destination volume to the three
hosts.
B. Use multiMirror asynchronous on the database volume with three jobs and assign the jobs to the three
hosts.
C. Use multiView on the database volume to create a PiT; create three views for that PiT and assign it to
the three hosts.
D. Use multiCopy on the database volume with three jobs and assign each destination volume to the
three hosts.
Answer: C,D

certification LSI   L50-502 examen   L50-502   L50-502 examen   L50-502   L50-502

NO.12 You are trying to determine the optimal solution to meet the data recovery needs of a customer. What
will provide your customer with the smallest recovery time objective and array failure protection?
A. asynchronous multiMirror
B. multiView
C. multiCopy
D. synchronous multiMirror
Answer: D

certification LSI   certification L50-502   L50-502   L50-502   L50-502

NO.13 A customer has an environment that includes existing VMware disks that must be imported into SVM.
VMware marks a signature on the volumes which identifies the controller WWNN and LUN ID. Which
statement describes what you need to take into account when migrating the VMware disks under SVM
control?
A. VMware will not resignature automatically.
B. VMware will present the same LUN ID after importing.
C. VMware will modify the DPM WWNN to match the array WWNN.
D. VMware resignaturing must be set correctly.
Answer: D

certification LSI   L50-502   L50-502   L50-502   certification L50-502

NO.14 You are implementing zoning for an SVM 5 environment. Which rule should you observe when zoning
servers with DPMs?
A. There should be no more than four paths per DPM to any one server.
B. There should be no more than two paths per DPM to any one server.
C. All servers and DPM front-end ports should reside in the same zone.
D. The servers should be zoned directly with the storage controllers.
Answer: B

LSI examen   L50-502   L50-502 examen   certification L50-502   certification L50-502

NO.15 Your customer would like to consolidate multiple storage arrays which are currently under-utilized. The
SAN is not currently managed by SVM. The customer desires the minimal impact to their applications.
Which two statements describe the process to consolidate the arrays under SVM? (Choose two.)
A. Import existing LUNs into SVM pools.
B. Use multiMigrate to move the volumes to the desired array.
C. Use asynchronous mirror to move the volumes to the desired array.
D. Use multiMigrate to move the volumes to the desired array and remove SVM.
Answer: A,B

LSI examen   L50-502   L50-502 examen   L50-502 examen   L50-502

Pour l'instant, vous pouvez télécharger le démo gratuit de Q&A LSI L50-502 dans Pass4Test pour se former avant le test LSI L50-502.