LSI L50-501, de formation et d'essai

Est-que vous s'inquiétez encore à passer le test Certification L50-501 qui demande beaucoup d'efforts? Est-que vous travaillez nuit et jour juste pour préparer le test de LSI L50-501? Si vous voulez réussir le test LSI L50-501 plus facilement? N'hésitez plus à nous choisir. Pass4Test vous aidera à réaliser votre rêve.

Le test simulation LSI L50-501 sorti par les experts de Pass4Test est bien proche du test réel. Nous sommes confiant sur notre produit qui vous permet à réussir le test LSI L50-501 à la première fois. Si vous ne passe pas le test, votre argent sera tout rendu.

Si vous faites toujours la lutte contre le test LSI L50-501, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de LSI L50-501. Si vous avez déjà décidé à s'améliorer via LSI L50-501, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.

On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification LSI L50-501. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.

Code d'Examen: L50-501
Nom d'Examen: LSI (LSI SVM5 Implementation Engineer)
Questions et réponses: 119 Q&As

Le Certificat de LSI L50-501 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat LSI L50-501, c'est-à-dire avoir une grande fortune. Le Certificat LSI L50-501 peut bien tester des connaissances professionnelles IT. La Q&A LSI L50-501 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.

Choisir le Pass4Test peut vous aider à réussir 100% le test LSI L50-501 qui change tout le temps. Pass4Test peut vous offrir les infos plus nouvelles. Dans le site de Pass4Test le servie en ligne est disponible toute la journée. Si vous ne passerez pas le test, votre argent sera tout rendu.

L50-501 Démo gratuit à télécharger: http://www.pass4test.fr/L50-501.html

NO.1 What are two requirements to set up a stretched SVM domain across two datacenters on the same
campus? (Choose two.)
A. Both SVM servers must be located on the same site.
B. The sites must be interconnected through two fabrics/ISLs.
C. Each site must have a minimum of one copy of the setup volume.
D. A dedicated IP link must be provided to interconnect the SVM servers.
Answer: B,C

certification LSI   certification L50-501   L50-501   certification L50-501

NO.2 When adding storage to an existing SVM pool, what must be considered?
A. Growing the LUN will provide better utilization of storage.
B. Always pay attention to the performance characteristics of the storage.
C. Always select storage with different storage characteristics.
D. Adding storage to an existing pool will reduce performance.
Answer: B

LSI   L50-501   L50-501 examen   certification L50-501   L50-501   L50-501 examen

NO.3 During the SVM Management software installation, which two adapters would you select to be
controlled by the SVM? (Choose two.)
A. Emulex Fibre Channel adapter
B. Qlogic Fibre Channel adapter
C. Microsoft iSCSI initiator
D. Smart Array controller
Answer: B,C

LSI examen   L50-501   certification L50-501   certification L50-501

NO.4 Which parameter must be the same for SVM servers that manage the same SVM domain?
A. serial number
B. SVM domain name
C. computer name
D. WWNN
Answer: B

LSI   certification L50-501   L50-501   L50-501

NO.5 A customer is running a cluster with cluster nodes and storage on either site and requires synchronous
mirroring across the two sites. You proposed a stretched SVM domain and now you need to configure the
zoning. Which two zoning rules apply to this configuration? (Choose two.)
A. Each DPM must see both storage systems.
B. Each DPM must only see the local storage system.
C. Each cluster node must see both SVM servers.
D. The SVM servers must see each other.
Answer: A,D

LSI   L50-501   L50-501

NO.6 At the end of the SVM installation, which three actions should you perform to ensure that the installation
is correct.? (Choose three.)
A. Test failover between two SVMs to make sure that you can successfully failover between SVMs.
B. Make sure that the SVM recognizes the DPM and that the DPM recognizes all of the devices that are
connected to the DPM ports.
C. Make sure that the SVM and DPM recognize the LUNs available on the storage array.
D. Make sure that the DPMs can communicate with each other.
E. Make sure that the LSI Failover Driver is installed on the SVM server.
Answer: A,B,C

LSI   L50-501   L50-501 examen   L50-501 examen

NO.7 Two SVM servers in SVM Domain A are connected over Fibre Channel with two SVM servers in SVM
Domain B. The SVM servers' HBA at each domain can see the SVM servers' HBA at the other SVM
domain. What should you do to interconnect the SVM domains?
A. An SVM automatically negotiates the connection with the SVMs in other domains over Fibre Channel.
B. SVM domains should not be interconnected.
C. To interconnect two SVM domains, select Tools > Options > General > Configuration > Connect SVM
Domain.
D. To interconnect two SVM domains, select Tools > Options > General > Configuration > Connect FC
Domain.
Answer: A

certification LSI   L50-501   L50-501   certification L50-501   L50-501 examen

NO.8 Where is the SVM metadata stored?
A. On a mirror, between the two SVM internal hard drives.
B. On a mirror, between the managed storage array LUNs and the SVM internal hard drive.
C. On a mirror, between managed storage array LUNs.
D. On a mirror, between the two SVM internal hard drive partitions.
Answer: C

LSI   L50-501 examen   L50-501

NO.9 Which statement describes what should be performed after a DPM image upgrade?
A. The DPM rank must be modified.
B. Set the DPM maximum frame size.
C. The DPM image upgrade does not change the DPM configuration parameters.
D. Configure the DPM ports type and speed.
Answer: C

LSI examen   certification L50-501   L50-501   L50-501 examen

NO.10 A customer wants to create a SVM stripe. Which SVM stripe value should be set?
A. 64 KB
B. 256 KB
C. 512 KB
D. 1 MB
Answer: D

certification LSI   certification L50-501   L50-501

NO.11 What is the difference between the active SVM server and the passive SVM server?
A. The passive SVM server takes control when the active SVM server is too busy.
B. The passive SVM server is a standby server only and does not perform any management tasks.
C. The passive SVM server can only modify objects but cannot create objects.
D. The passive SVM server can only manage user accounts.
Answer: B

LSI examen   certification L50-501   L50-501 examen   L50-501   certification L50-501

NO.12 Your current SAN environment includes a storage system with LUNs exposed directly to Windows hosts.
You have been asked to integrate this storage system into the new SVM domain. Which statement is
correct?
A. The existing data can be moved to an SVM virtual volume while the application is still writing to the
source LUN.
B. The physical LUN containing the data must be unmounted from the host while the data is been moved
to an SVM virtual volume.
C. The physical LUN containing the data must be mounted to the host while the data is been moved to an
SVM virtual volume.
D. The physical LUN containing the data must be mounted to the SVM servers while the data is been
moved to an SVM virtual volume.
Answer: B

certification LSI   L50-501 examen   certification L50-501   L50-501 examen   certification L50-501

NO.13 You have a customer that feels that their application can take advantage of striping their data. Which
two conditions will improve performance? (Choose two.)
A. Striping across two different storage systems.
B. Servers are running a transactional application where I/Os per second are required.
C. Disks that are available for inclusion in the stripe set are not of equal size.
D. Disks that are available for inclusion in the stripe set are of equal size.
Answer: A,D

certification LSI   L50-501   certification L50-501   L50-501 examen   L50-501   L50-501 examen

NO.14 What should you do before starting the SVM server software upgrade process?
A. Reboot the SVM server.
B. Disconnect the SVM Fibre Channel cables.
C. Shut down the SVM Web server.
D. Uninstall the SVM server agent.
Answer: B

LSI examen   L50-501   L50-501

NO.15 Which statement about the SVM server software upgrade is true?
A. The SVM server must be rebooted as part of the software upgrade process.
B. The SVM server must only be rebooted on major versions, e.g 5.1 to 5.2.
C. The SVM server can stay online during the software upgrade.
D. The DPMs must be taken offline during the SVM server reboot.
Answer: A

certification LSI   L50-501 examen   L50-501   L50-501   certification L50-501

Si vous hésitez encore à nous choisir, vous pouvez tout d'abord télécharger le démo gratuit dans le site Pass4Test pour connaître mieux la fiabilité de Pass4Test. Nous avons la confiance à vous promettre que vous allez passer le test LSI L50-501 à la première fois.

Certification LSI de téléchargement gratuit pratique d'examen L50-501, questions et réponses

Si vous voulez se prouver une compétition et s'enraciner le statut dans l'industrie IT à travers de test Certification LSI L50-501, c'est obligatoire que vous devez avior les connaissances professionnelles. Mais il demande pas mal de travaux à passer le test Certification LSI L50-501. Peut-être d'obtenir le Certificat LSI L50-501 peut promouvoir le tremplin vers l'Industrie IT, mais vous n'avez pas besoin de travailler autant dur à préparer le test. Vous avez un autre choix à faire toutes les choses plus facile : prendre le produit de Pass4Test comme vos matériaux avec qui vous vous pratiquez avant le test réel. La Q&A de Pass4Test est recherchée particulièrement pour le test IT.

Aujourd'hui, c'est une société pleine de gens talentueux, la meilleure façon de suivre et assurer la place dans votre carrière est de s'améliorer sans arrêt. Si vous n'augmentez pas dans votre carrière, vous êtes juste sous-développé parce que les autres sont meilleurs que vous. Pour éviter ce cas, vous devez vous former successivement.

Selon les anciens test LSI L50-501, la Q&A offerte par Pass4Test est bien liée avec le test réel.

Vous aurez une assurance 100% à réussir le test LSI L50-501 si vous choisissez le produit de Pass4Test. Si malheuresement, vous ne passerez pas le test, votre argent seront tout rendu.

Est-ce que vous vous souciez encore de réussir le test LSI L50-501? Est-ce que vous attendez plus le guide de formation plus nouveaux? Le guide de formation vient de lancer par Pass4Test peut vous donner la solution. Vous pouvez télécharger la partie de guide gratuite pour prendre un essai, et vous allez découvrir que le test n'est pas aussi dur que l'imaginer. Pass4Test vous permet à réussir 100% le test. Votre argent sera tout rendu si vous échouez le test.

Code d'Examen: L50-501
Nom d'Examen: LSI (LSI SVM5 Implementation Engineer)
Questions et réponses: 119 Q&As

L50-501 Démo gratuit à télécharger: http://www.pass4test.fr/L50-501.html

NO.1 During the SVM Management software installation, which two adapters would you select to be
controlled by the SVM? (Choose two.)
A. Emulex Fibre Channel adapter
B. Qlogic Fibre Channel adapter
C. Microsoft iSCSI initiator
D. Smart Array controller
Answer: B,C

LSI examen   L50-501 examen   L50-501

NO.2 Two SVM servers in SVM Domain A are connected over Fibre Channel with two SVM servers in SVM
Domain B. The SVM servers' HBA at each domain can see the SVM servers' HBA at the other SVM
domain. What should you do to interconnect the SVM domains?
A. An SVM automatically negotiates the connection with the SVMs in other domains over Fibre Channel.
B. SVM domains should not be interconnected.
C. To interconnect two SVM domains, select Tools > Options > General > Configuration > Connect SVM
Domain.
D. To interconnect two SVM domains, select Tools > Options > General > Configuration > Connect FC
Domain.
Answer: A

LSI   L50-501   L50-501   certification L50-501

NO.3 You have a customer that feels that their application can take advantage of striping their data. Which
two conditions will improve performance? (Choose two.)
A. Striping across two different storage systems.
B. Servers are running a transactional application where I/Os per second are required.
C. Disks that are available for inclusion in the stripe set are not of equal size.
D. Disks that are available for inclusion in the stripe set are of equal size.
Answer: A,D

certification LSI   L50-501   L50-501

NO.4 Your current SAN environment includes a storage system with LUNs exposed directly to Windows hosts.
You have been asked to integrate this storage system into the new SVM domain. Which statement is
correct?
A. The existing data can be moved to an SVM virtual volume while the application is still writing to the
source LUN.
B. The physical LUN containing the data must be unmounted from the host while the data is been moved
to an SVM virtual volume.
C. The physical LUN containing the data must be mounted to the host while the data is been moved to an
SVM virtual volume.
D. The physical LUN containing the data must be mounted to the SVM servers while the data is been
moved to an SVM virtual volume.
Answer: B

LSI examen   L50-501   L50-501 examen   L50-501 examen   L50-501 examen

NO.5 When adding storage to an existing SVM pool, what must be considered?
A. Growing the LUN will provide better utilization of storage.
B. Always pay attention to the performance characteristics of the storage.
C. Always select storage with different storage characteristics.
D. Adding storage to an existing pool will reduce performance.
Answer: B

LSI   certification L50-501   L50-501

NO.6 What is the difference between the active SVM server and the passive SVM server?
A. The passive SVM server takes control when the active SVM server is too busy.
B. The passive SVM server is a standby server only and does not perform any management tasks.
C. The passive SVM server can only modify objects but cannot create objects.
D. The passive SVM server can only manage user accounts.
Answer: B

LSI examen   L50-501   certification L50-501   L50-501 examen

NO.7 Which statement describes what should be performed after a DPM image upgrade?
A. The DPM rank must be modified.
B. Set the DPM maximum frame size.
C. The DPM image upgrade does not change the DPM configuration parameters.
D. Configure the DPM ports type and speed.
Answer: C

LSI   L50-501 examen   L50-501   certification L50-501   certification L50-501

NO.8 Which parameter must be the same for SVM servers that manage the same SVM domain?
A. serial number
B. SVM domain name
C. computer name
D. WWNN
Answer: B

LSI   L50-501   L50-501 examen   L50-501

NO.9 A customer wants to create a SVM stripe. Which SVM stripe value should be set?
A. 64 KB
B. 256 KB
C. 512 KB
D. 1 MB
Answer: D

LSI   L50-501   L50-501   L50-501 examen

NO.10 At the end of the SVM installation, which three actions should you perform to ensure that the installation
is correct.? (Choose three.)
A. Test failover between two SVMs to make sure that you can successfully failover between SVMs.
B. Make sure that the SVM recognizes the DPM and that the DPM recognizes all of the devices that are
connected to the DPM ports.
C. Make sure that the SVM and DPM recognize the LUNs available on the storage array.
D. Make sure that the DPMs can communicate with each other.
E. Make sure that the LSI Failover Driver is installed on the SVM server.
Answer: A,B,C

certification LSI   certification L50-501   L50-501 examen   L50-501 examen   L50-501

NO.11 What should you do before starting the SVM server software upgrade process?
A. Reboot the SVM server.
B. Disconnect the SVM Fibre Channel cables.
C. Shut down the SVM Web server.
D. Uninstall the SVM server agent.
Answer: B

certification LSI   L50-501   L50-501

NO.12 Which statement about the SVM server software upgrade is true?
A. The SVM server must be rebooted as part of the software upgrade process.
B. The SVM server must only be rebooted on major versions, e.g 5.1 to 5.2.
C. The SVM server can stay online during the software upgrade.
D. The DPMs must be taken offline during the SVM server reboot.
Answer: A

certification LSI   L50-501   L50-501 examen   L50-501

NO.13 What are two requirements to set up a stretched SVM domain across two datacenters on the same
campus? (Choose two.)
A. Both SVM servers must be located on the same site.
B. The sites must be interconnected through two fabrics/ISLs.
C. Each site must have a minimum of one copy of the setup volume.
D. A dedicated IP link must be provided to interconnect the SVM servers.
Answer: B,C

LSI   L50-501 examen   certification L50-501   L50-501

NO.14 A customer is running a cluster with cluster nodes and storage on either site and requires synchronous
mirroring across the two sites. You proposed a stretched SVM domain and now you need to configure the
zoning. Which two zoning rules apply to this configuration? (Choose two.)
A. Each DPM must see both storage systems.
B. Each DPM must only see the local storage system.
C. Each cluster node must see both SVM servers.
D. The SVM servers must see each other.
Answer: A,D

LSI   L50-501   L50-501   certification L50-501   L50-501   L50-501

NO.15 Where is the SVM metadata stored?
A. On a mirror, between the two SVM internal hard drives.
B. On a mirror, between the managed storage array LUNs and the SVM internal hard drive.
C. On a mirror, between managed storage array LUNs.
D. On a mirror, between the two SVM internal hard drive partitions.
Answer: C

LSI examen   L50-501 examen   L50-501   L50-501

L'équipe de Pass4Test se composant des experts dans le domaine IT. Toutes les Q&As sont examinées par nos experts. Les Q&As offertes par Pass4Test sont réputées pour sa grande couverture ( presque 100%) et sa haute précision. Vous pouvez trouver pas mal de sites similaires que Pass4Test, ces sites peut-être peuvent vous offrir aussi les guides d'études ou les services en ligne, mais on doit admettre que Pass4Test peut être la tête de ces nombreux sites. La mise à jour, la grande couverture des questions, la haute précision des réponses nous permettent à augmenter le taux à réussir le test Certification LSI L50-501. Tous les points mentionnés ci-dessus seront une assurance 100% pour votre réussite de test Certification LSI L50-501.

Le matériel de formation de l'examen de meilleur LSI L50-501

Le test LSI L50-501 peut bien examnier les connaissances et techniques professionnelles. Pass4Test est votre raccourci amené au succès de test LSI L50-501. Chez Pass4Test, vous n'avez pas besoin de dépenser trop de temps et d'argent juste pour préparer le test LSI L50-501. Travaillez avec l'outil formation de Pass4Test visé au test, il ne vous demande que 20 heures à préparer.

Le test LSI L50-501 est le premier pas pour promouvoir dans l'Industrie IT, mais aussi la seule rue ramenée au pic de succès. Le test LSI L50-501 joue un rôle très important dans cette industrie. Et aussi, Pass4Test est un chaînon inevitable pour réussir le test sans aucune doute.

Pass4Test est un site à offrir particulièrement la Q&A LSI L50-501, vous pouvez non seulement aprrendre plus de connaissances professionnelles, et encore obtenir le Passport de Certification LSI L50-501, et trouver un meilleur travail plus tard. Les documentations offertes par Pass4Test sont tout étudiés par les experts de Pass4Test en profitant leurs connaissances et expériences, ces Q&As sont impresionnées par une bonne qualité. Il ne faut que choisir Pass4Test, vous pouvez non seulement passer le test LSI L50-501 et même se renforcer vos connaissances professionnelles IT.

Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test LSI L50-501.

Code d'Examen: L50-501
Nom d'Examen: LSI (LSI SVM5 Implementation Engineer)
Questions et réponses: 119 Q&As

Bien qu'Il y ait plein de talentueux dans cette société, il manque beaucoup de professionnels dans les domaine en cours de développement, l'Industrie IT est l'un de ces domaines. Donc le test LSI L50-501 est un bon l'examination de technique informatique. Pass4Test est un site d'offrir la formation particulière au test LSI L50-501.

Peut-être vous voyez les guides d'études similaires pour le test LSI L50-501, mais nous avons la confiance que vous allez nous choisir finalement grâce à notre gravité d'état dans cette industrie et notre profession. Pass4Test se contribue à amérioler votre carrière. Vous saurez que vous êtes bien préparé à passer le test LSI L50-501 lorsque vous choisissez la Q&A de Pass4Test. De plus, un an de service gratuit en ligne après vendre est aussi disponible pour vous.

Pass4Test est un bon catalyseur du succès pour les professionnels IT. Beaucoup de gens passer le test LSI L50-501 avec l'aide de l'outil formation. Les experts profitent leurs expériences riches et connaissances à faire sortir la Q&A LSI L50-501 plus nouvelle qui comprend les exercices de pratiquer et le test simulation. Vous pouvez passer le test LSI L50-501 plus facilement avec la Q&A de Pass4Test.

L50-501 Démo gratuit à télécharger: http://www.pass4test.fr/L50-501.html

NO.1 Where is the SVM metadata stored?
A. On a mirror, between the two SVM internal hard drives.
B. On a mirror, between the managed storage array LUNs and the SVM internal hard drive.
C. On a mirror, between managed storage array LUNs.
D. On a mirror, between the two SVM internal hard drive partitions.
Answer: C

LSI   L50-501 examen   L50-501   certification L50-501   L50-501

NO.2 At the end of the SVM installation, which three actions should you perform to ensure that the installation
is correct.? (Choose three.)
A. Test failover between two SVMs to make sure that you can successfully failover between SVMs.
B. Make sure that the SVM recognizes the DPM and that the DPM recognizes all of the devices that are
connected to the DPM ports.
C. Make sure that the SVM and DPM recognize the LUNs available on the storage array.
D. Make sure that the DPMs can communicate with each other.
E. Make sure that the LSI Failover Driver is installed on the SVM server.
Answer: A,B,C

LSI   L50-501   certification L50-501   L50-501   L50-501   L50-501 examen

NO.3 Which statement describes what should be performed after a DPM image upgrade?
A. The DPM rank must be modified.
B. Set the DPM maximum frame size.
C. The DPM image upgrade does not change the DPM configuration parameters.
D. Configure the DPM ports type and speed.
Answer: C

certification LSI   L50-501   L50-501   certification L50-501   L50-501

NO.4 You have a customer that feels that their application can take advantage of striping their data. Which
two conditions will improve performance? (Choose two.)
A. Striping across two different storage systems.
B. Servers are running a transactional application where I/Os per second are required.
C. Disks that are available for inclusion in the stripe set are not of equal size.
D. Disks that are available for inclusion in the stripe set are of equal size.
Answer: A,D

certification LSI   certification L50-501   L50-501   L50-501   L50-501

NO.5 Your current SAN environment includes a storage system with LUNs exposed directly to Windows hosts.
You have been asked to integrate this storage system into the new SVM domain. Which statement is
correct?
A. The existing data can be moved to an SVM virtual volume while the application is still writing to the
source LUN.
B. The physical LUN containing the data must be unmounted from the host while the data is been moved
to an SVM virtual volume.
C. The physical LUN containing the data must be mounted to the host while the data is been moved to an
SVM virtual volume.
D. The physical LUN containing the data must be mounted to the SVM servers while the data is been
moved to an SVM virtual volume.
Answer: B

LSI examen   L50-501 examen   L50-501 examen   L50-501 examen

NO.6 A customer wants to create a SVM stripe. Which SVM stripe value should be set?
A. 64 KB
B. 256 KB
C. 512 KB
D. 1 MB
Answer: D

certification LSI   certification L50-501   certification L50-501   L50-501   L50-501   certification L50-501

NO.7 What is the difference between the active SVM server and the passive SVM server?
A. The passive SVM server takes control when the active SVM server is too busy.
B. The passive SVM server is a standby server only and does not perform any management tasks.
C. The passive SVM server can only modify objects but cannot create objects.
D. The passive SVM server can only manage user accounts.
Answer: B

LSI   certification L50-501   L50-501   L50-501   L50-501 examen

NO.8 During the SVM Management software installation, which two adapters would you select to be
controlled by the SVM? (Choose two.)
A. Emulex Fibre Channel adapter
B. Qlogic Fibre Channel adapter
C. Microsoft iSCSI initiator
D. Smart Array controller
Answer: B,C

certification LSI   L50-501   certification L50-501   L50-501 examen

NO.9 Two SVM servers in SVM Domain A are connected over Fibre Channel with two SVM servers in SVM
Domain B. The SVM servers' HBA at each domain can see the SVM servers' HBA at the other SVM
domain. What should you do to interconnect the SVM domains?
A. An SVM automatically negotiates the connection with the SVMs in other domains over Fibre Channel.
B. SVM domains should not be interconnected.
C. To interconnect two SVM domains, select Tools > Options > General > Configuration > Connect SVM
Domain.
D. To interconnect two SVM domains, select Tools > Options > General > Configuration > Connect FC
Domain.
Answer: A

LSI   L50-501 examen   L50-501 examen   L50-501 examen

NO.10 When adding storage to an existing SVM pool, what must be considered?
A. Growing the LUN will provide better utilization of storage.
B. Always pay attention to the performance characteristics of the storage.
C. Always select storage with different storage characteristics.
D. Adding storage to an existing pool will reduce performance.
Answer: B

LSI   L50-501   L50-501   L50-501   certification L50-501   L50-501

NO.11 What should you do before starting the SVM server software upgrade process?
A. Reboot the SVM server.
B. Disconnect the SVM Fibre Channel cables.
C. Shut down the SVM Web server.
D. Uninstall the SVM server agent.
Answer: B

LSI   certification L50-501   L50-501   L50-501   L50-501 examen

NO.12 Which parameter must be the same for SVM servers that manage the same SVM domain?
A. serial number
B. SVM domain name
C. computer name
D. WWNN
Answer: B

LSI   L50-501   L50-501 examen   L50-501

NO.13 What are two requirements to set up a stretched SVM domain across two datacenters on the same
campus? (Choose two.)
A. Both SVM servers must be located on the same site.
B. The sites must be interconnected through two fabrics/ISLs.
C. Each site must have a minimum of one copy of the setup volume.
D. A dedicated IP link must be provided to interconnect the SVM servers.
Answer: B,C

LSI   L50-501   L50-501   certification L50-501

NO.14 Which statement about the SVM server software upgrade is true?
A. The SVM server must be rebooted as part of the software upgrade process.
B. The SVM server must only be rebooted on major versions, e.g 5.1 to 5.2.
C. The SVM server can stay online during the software upgrade.
D. The DPMs must be taken offline during the SVM server reboot.
Answer: A

LSI examen   L50-501   L50-501   L50-501

NO.15 A customer is running a cluster with cluster nodes and storage on either site and requires synchronous
mirroring across the two sites. You proposed a stretched SVM domain and now you need to configure the
zoning. Which two zoning rules apply to this configuration? (Choose two.)
A. Each DPM must see both storage systems.
B. Each DPM must only see the local storage system.
C. Each cluster node must see both SVM servers.
D. The SVM servers must see each other.
Answer: A,D

certification LSI   L50-501   L50-501

Il y a plusieurs de façons pour réussir le test LSI L50-501, vous pouvez travailler dur et dépenser beaucoup d'argents, ou vous pouvez travailler plus efficacement avec moins temps dépensés.

LSI meilleur examen L50-501, questions et réponses

Pass4Test, où vous pouvez trouver les conseils et les documentations de test Certification LSI L50-501, est un siteweb remarquable offrant les données à préparer le test IT. Les documentations partiels et les mis en nouveau sont offerts gratuitement dans le site de Pass4Test. D'ailleurs, nos experts profitent de leurs expériences et leurs efforts à lancer sans arrêts les Q&A plus proches au test réel. Vous allez passer votre examen plus facile.

Les produits de Pass4Test sont préparés pour le test Certification LSI L50-501, y compris les formations et les informations ciblées au test LSI L50-501. D'ailleurs, la Q&A de Pass4Test qui est impressionnée par la grande couverture des questions et la haute précision des réponses vous permet à réussir le test avec une haute note.

Les experts de Pass4Test ont fait sortir un nouveau guide d'étude de Certification LSI L50-501, avec ce guide d'étude, réussir ce test a devenu une chose pas difficile. Pass4Test vous permet à réussir 100% le test LSI L50-501 à la première fois. Les questions et réponses vont apparaître dans le test réel. Pass4Test peut vous donner une Q&A plus complète une fois que vous choisissez nous. D'ailleurs, la mise à jour gratuite pendant un an est aussi disponible pour vous.

Vous pouvez comparer un peu les Q&As dans les autres sites web que lesquelles de Pass4Test, c'est pas difficile à trouver que la Q&A LSI L50-501 est plus complète. Vous pouvez télécharger le démo gratuit à prendre un essai de la qualité de Pass4Test. La raison de la grande couverture des questions et la haute qualité des réponses vient de l'expérience riche et la connaissances professionnelles des experts de Pass4Test. La nouvelle Q&A de LSI L50-501 lancée par l'équipe de Pass4Test sont bien populaire par les candidats.

Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification LSI L50-501. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.

Code d'Examen: L50-501

Nom d'Examen: LSI (LSI SVM5 Implementation Engineer)

Questions et réponses: 119 Q&As

L50-501 Démo gratuit à télécharger: http://www.pass4test.fr/L50-501.html

NO.1 You have a customer that feels that their application can take advantage of striping their data. Which
two conditions will improve performance? (Choose two.)
A. Striping across two different storage systems.
B. Servers are running a transactional application where I/Os per second are required.
C. Disks that are available for inclusion in the stripe set are not of equal size.
D. Disks that are available for inclusion in the stripe set are of equal size.
Answer: A,D

certification LSI   L50-501 examen   L50-501 examen

NO.2 Which statement about the SVM server software upgrade is true?
A. The SVM server must be rebooted as part of the software upgrade process.
B. The SVM server must only be rebooted on major versions, e.g 5.1 to 5.2.
C. The SVM server can stay online during the software upgrade.
D. The DPMs must be taken offline during the SVM server reboot.
Answer: A

LSI   L50-501 examen   L50-501

NO.3 Which statement describes what should be performed after a DPM image upgrade?
A. The DPM rank must be modified.
B. Set the DPM maximum frame size.
C. The DPM image upgrade does not change the DPM configuration parameters.
D. Configure the DPM ports type and speed.
Answer: C

certification LSI   L50-501 examen   L50-501 examen   L50-501 examen   L50-501

NO.4 What should you do before starting the SVM server software upgrade process?
A. Reboot the SVM server.
B. Disconnect the SVM Fibre Channel cables.
C. Shut down the SVM Web server.
D. Uninstall the SVM server agent.
Answer: B

LSI examen   L50-501   L50-501 examen

NO.5 Which parameter must be the same for SVM servers that manage the same SVM domain?
A. serial number
B. SVM domain name
C. computer name
D. WWNN
Answer: B

LSI   L50-501   L50-501   L50-501 examen   certification L50-501

NO.6 What are two requirements to set up a stretched SVM domain across two datacenters on the same
campus? (Choose two.)
A. Both SVM servers must be located on the same site.
B. The sites must be interconnected through two fabrics/ISLs.
C. Each site must have a minimum of one copy of the setup volume.
D. A dedicated IP link must be provided to interconnect the SVM servers.
Answer: B,C

LSI examen   L50-501 examen   L50-501

NO.7 Your current SAN environment includes a storage system with LUNs exposed directly to Windows hosts.
You have been asked to integrate this storage system into the new SVM domain. Which statement is
correct?
A. The existing data can be moved to an SVM virtual volume while the application is still writing to the
source LUN.
B. The physical LUN containing the data must be unmounted from the host while the data is been moved
to an SVM virtual volume.
C. The physical LUN containing the data must be mounted to the host while the data is been moved to an
SVM virtual volume.
D. The physical LUN containing the data must be mounted to the SVM servers while the data is been
moved to an SVM virtual volume.
Answer: B

LSI   L50-501   L50-501

NO.8 Two SVM servers in SVM Domain A are connected over Fibre Channel with two SVM servers in SVM
Domain B. The SVM servers' HBA at each domain can see the SVM servers' HBA at the other SVM
domain. What should you do to interconnect the SVM domains?
A. An SVM automatically negotiates the connection with the SVMs in other domains over Fibre Channel.
B. SVM domains should not be interconnected.
C. To interconnect two SVM domains, select Tools > Options > General > Configuration > Connect SVM
Domain.
D. To interconnect two SVM domains, select Tools > Options > General > Configuration > Connect FC
Domain.
Answer: A

certification LSI   L50-501 examen   L50-501 examen   certification L50-501

NO.9 What is the difference between the active SVM server and the passive SVM server?
A. The passive SVM server takes control when the active SVM server is too busy.
B. The passive SVM server is a standby server only and does not perform any management tasks.
C. The passive SVM server can only modify objects but cannot create objects.
D. The passive SVM server can only manage user accounts.
Answer: B

LSI   certification L50-501   certification L50-501

NO.10 At the end of the SVM installation, which three actions should you perform to ensure that the installation
is correct.? (Choose three.)
A. Test failover between two SVMs to make sure that you can successfully failover between SVMs.
B. Make sure that the SVM recognizes the DPM and that the DPM recognizes all of the devices that are
connected to the DPM ports.
C. Make sure that the SVM and DPM recognize the LUNs available on the storage array.
D. Make sure that the DPMs can communicate with each other.
E. Make sure that the LSI Failover Driver is installed on the SVM server.
Answer: A,B,C

LSI   L50-501   L50-501   L50-501 examen   L50-501   L50-501

NO.11 A customer wants to create a SVM stripe. Which SVM stripe value should be set?
A. 64 KB
B. 256 KB
C. 512 KB
D. 1 MB
Answer: D

LSI examen   certification L50-501   L50-501 examen

NO.12 Where is the SVM metadata stored?
A. On a mirror, between the two SVM internal hard drives.
B. On a mirror, between the managed storage array LUNs and the SVM internal hard drive.
C. On a mirror, between managed storage array LUNs.
D. On a mirror, between the two SVM internal hard drive partitions.
Answer: C

certification LSI   L50-501 examen   L50-501 examen   L50-501   L50-501 examen

NO.13 A customer is running a cluster with cluster nodes and storage on either site and requires synchronous
mirroring across the two sites. You proposed a stretched SVM domain and now you need to configure the
zoning. Which two zoning rules apply to this configuration? (Choose two.)
A. Each DPM must see both storage systems.
B. Each DPM must only see the local storage system.
C. Each cluster node must see both SVM servers.
D. The SVM servers must see each other.
Answer: A,D

LSI examen   L50-501   L50-501   L50-501   L50-501

NO.14 During the SVM Management software installation, which two adapters would you select to be
controlled by the SVM? (Choose two.)
A. Emulex Fibre Channel adapter
B. Qlogic Fibre Channel adapter
C. Microsoft iSCSI initiator
D. Smart Array controller
Answer: B,C

LSI   L50-501   L50-501

NO.15 When adding storage to an existing SVM pool, what must be considered?
A. Growing the LUN will provide better utilization of storage.
B. Always pay attention to the performance characteristics of the storage.
C. Always select storage with different storage characteristics.
D. Adding storage to an existing pool will reduce performance.
Answer: B

LSI   L50-501   certification L50-501

Selon les feedbacks les professionnels bien réputés dans l'Industrie IT, Pass4Test est un bon catalyseur de leurs succès. L'outil de formation offert par Pass4Test leur aide d'économiser le temps et l'argent, le plus important est qu'ils aient passé le test LSI L50-501 avec succès. Pass4Test est un fournissur fiable. Vous allez réaliser votre rêve avec l'aide de Pass4Test.