Est-que vous s'inquiétez encore à passer le test Certification L50-501 qui demande beaucoup d'efforts? Est-que vous travaillez nuit et jour juste pour préparer le test de LSI L50-501? Si vous voulez réussir le test LSI L50-501 plus facilement? N'hésitez plus à nous choisir. Pass4Test vous aidera à réaliser votre rêve.
Le test simulation LSI L50-501 sorti par les experts de Pass4Test est bien proche du test réel. Nous sommes confiant sur notre produit qui vous permet à réussir le test LSI L50-501 à la première fois. Si vous ne passe pas le test, votre argent sera tout rendu.
Si vous faites toujours la lutte contre le test LSI L50-501, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de LSI L50-501. Si vous avez déjà décidé à s'améliorer via LSI L50-501, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.
On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification LSI L50-501. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.
Code d'Examen: L50-501
Nom d'Examen: LSI (LSI SVM5 Implementation Engineer)
Questions et réponses: 119 Q&As
Le Certificat de LSI L50-501 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat LSI L50-501, c'est-à-dire avoir une grande fortune. Le Certificat LSI L50-501 peut bien tester des connaissances professionnelles IT. La Q&A LSI L50-501 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.
Choisir le Pass4Test peut vous aider à réussir 100% le test LSI L50-501 qui change tout le temps. Pass4Test peut vous offrir les infos plus nouvelles. Dans le site de Pass4Test le servie en ligne est disponible toute la journée. Si vous ne passerez pas le test, votre argent sera tout rendu.
L50-501 Démo gratuit à télécharger: http://www.pass4test.fr/L50-501.html
NO.1 What are two requirements to set up a stretched SVM domain across two datacenters on the same
campus? (Choose two.)
A. Both SVM servers must be located on the same site.
B. The sites must be interconnected through two fabrics/ISLs.
C. Each site must have a minimum of one copy of the setup volume.
D. A dedicated IP link must be provided to interconnect the SVM servers.
Answer: B,C
certification LSI certification L50-501 L50-501 certification L50-501
NO.2 When adding storage to an existing SVM pool, what must be considered?
A. Growing the LUN will provide better utilization of storage.
B. Always pay attention to the performance characteristics of the storage.
C. Always select storage with different storage characteristics.
D. Adding storage to an existing pool will reduce performance.
Answer: B
LSI L50-501 L50-501 examen certification L50-501 L50-501 L50-501 examen
NO.3 During the SVM Management software installation, which two adapters would you select to be
controlled by the SVM? (Choose two.)
A. Emulex Fibre Channel adapter
B. Qlogic Fibre Channel adapter
C. Microsoft iSCSI initiator
D. Smart Array controller
Answer: B,C
LSI examen L50-501 certification L50-501 certification L50-501
NO.4 Which parameter must be the same for SVM servers that manage the same SVM domain?
A. serial number
B. SVM domain name
C. computer name
D. WWNN
Answer: B
LSI certification L50-501 L50-501 L50-501
NO.5 A customer is running a cluster with cluster nodes and storage on either site and requires synchronous
mirroring across the two sites. You proposed a stretched SVM domain and now you need to configure the
zoning. Which two zoning rules apply to this configuration? (Choose two.)
A. Each DPM must see both storage systems.
B. Each DPM must only see the local storage system.
C. Each cluster node must see both SVM servers.
D. The SVM servers must see each other.
Answer: A,D
LSI L50-501 L50-501
NO.6 At the end of the SVM installation, which three actions should you perform to ensure that the installation
is correct.? (Choose three.)
A. Test failover between two SVMs to make sure that you can successfully failover between SVMs.
B. Make sure that the SVM recognizes the DPM and that the DPM recognizes all of the devices that are
connected to the DPM ports.
C. Make sure that the SVM and DPM recognize the LUNs available on the storage array.
D. Make sure that the DPMs can communicate with each other.
E. Make sure that the LSI Failover Driver is installed on the SVM server.
Answer: A,B,C
LSI L50-501 L50-501 examen L50-501 examen
NO.7 Two SVM servers in SVM Domain A are connected over Fibre Channel with two SVM servers in SVM
Domain B. The SVM servers' HBA at each domain can see the SVM servers' HBA at the other SVM
domain. What should you do to interconnect the SVM domains?
A. An SVM automatically negotiates the connection with the SVMs in other domains over Fibre Channel.
B. SVM domains should not be interconnected.
C. To interconnect two SVM domains, select Tools > Options > General > Configuration > Connect SVM
Domain.
D. To interconnect two SVM domains, select Tools > Options > General > Configuration > Connect FC
Domain.
Answer: A
certification LSI L50-501 L50-501 certification L50-501 L50-501 examen
NO.8 Where is the SVM metadata stored?
A. On a mirror, between the two SVM internal hard drives.
B. On a mirror, between the managed storage array LUNs and the SVM internal hard drive.
C. On a mirror, between managed storage array LUNs.
D. On a mirror, between the two SVM internal hard drive partitions.
Answer: C
LSI L50-501 examen L50-501
NO.9 Which statement describes what should be performed after a DPM image upgrade?
A. The DPM rank must be modified.
B. Set the DPM maximum frame size.
C. The DPM image upgrade does not change the DPM configuration parameters.
D. Configure the DPM ports type and speed.
Answer: C
LSI examen certification L50-501 L50-501 L50-501 examen
NO.10 A customer wants to create a SVM stripe. Which SVM stripe value should be set?
A. 64 KB
B. 256 KB
C. 512 KB
D. 1 MB
Answer: D
certification LSI certification L50-501 L50-501
NO.11 What is the difference between the active SVM server and the passive SVM server?
A. The passive SVM server takes control when the active SVM server is too busy.
B. The passive SVM server is a standby server only and does not perform any management tasks.
C. The passive SVM server can only modify objects but cannot create objects.
D. The passive SVM server can only manage user accounts.
Answer: B
LSI examen certification L50-501 L50-501 examen L50-501 certification L50-501
NO.12 Your current SAN environment includes a storage system with LUNs exposed directly to Windows hosts.
You have been asked to integrate this storage system into the new SVM domain. Which statement is
correct?
A. The existing data can be moved to an SVM virtual volume while the application is still writing to the
source LUN.
B. The physical LUN containing the data must be unmounted from the host while the data is been moved
to an SVM virtual volume.
C. The physical LUN containing the data must be mounted to the host while the data is been moved to an
SVM virtual volume.
D. The physical LUN containing the data must be mounted to the SVM servers while the data is been
moved to an SVM virtual volume.
Answer: B
certification LSI L50-501 examen certification L50-501 L50-501 examen certification L50-501
NO.13 You have a customer that feels that their application can take advantage of striping their data. Which
two conditions will improve performance? (Choose two.)
A. Striping across two different storage systems.
B. Servers are running a transactional application where I/Os per second are required.
C. Disks that are available for inclusion in the stripe set are not of equal size.
D. Disks that are available for inclusion in the stripe set are of equal size.
Answer: A,D
certification LSI L50-501 certification L50-501 L50-501 examen L50-501 L50-501 examen
NO.14 What should you do before starting the SVM server software upgrade process?
A. Reboot the SVM server.
B. Disconnect the SVM Fibre Channel cables.
C. Shut down the SVM Web server.
D. Uninstall the SVM server agent.
Answer: B
LSI examen L50-501 L50-501
NO.15 Which statement about the SVM server software upgrade is true?
A. The SVM server must be rebooted as part of the software upgrade process.
B. The SVM server must only be rebooted on major versions, e.g 5.1 to 5.2.
C. The SVM server can stay online during the software upgrade.
D. The DPMs must be taken offline during the SVM server reboot.
Answer: A
certification LSI L50-501 examen L50-501 L50-501 certification L50-501
Si vous hésitez encore à nous choisir, vous pouvez tout d'abord télécharger le démo gratuit dans le site Pass4Test pour connaître mieux la fiabilité de Pass4Test. Nous avons la confiance à vous promettre que vous allez passer le test LSI L50-501 à la première fois.
没有评论:
发表评论