2014年3月9日星期日

HP meilleur examen HP0-081, questions et réponses

Le Certificat de HP HP0-081 signifie aussi un nouveau jalon de la carrière, le travail aura une space plus grande à augmenter, et tout le monde dans l'industrie IT sont désireux de l'obtenir. En face d'une grande passion pour le test Certification HP HP0-081, le contrariété est le taux très faible à réussir. Bien sûr que l'on ne passe pas le test HP0-081 sans aucun éffort, en même temps, le test de HP HP0-081 demande les connaissances bien professionnelles. Le guide d'étude dans le site Pass4Test peut vous fournir un raccourci à réussir le test HP HP0-081 et à obtenir le Certificat de ce test. Choisissez le guide d'étude de Pass4Test, vous verrez moins de temps dépensés, moins d'efforts contribués, mais plus de chances à réussir le test. Ça c'est une solution bien rentable pour vous.

Être un travailleur IT, est-ce que vous vous souciez encore pour passer le test Certificat IT? Le test examiner les techniques et connaissances professionnelles, donc c'est pas facile à réussir. Pour les candidats qui participent le test à la première fois, une bonne formation est très importante. Pass4Test offre les outils de formation particulier au test et bien proche de test réel, n'hésitez plus d'ajouter la Q&A au panier.

HP0-081 est un test de HP Certification, donc réussir HP0-081 est le premier pas à mettre le pied sur la Certifiction HP. Ça peut expliquer certiainement pourquoi le test HP HP0-081 devient de plus en plus chaud, et il y a de plus en plus de gens qui veulent participer le test HP0-081. Au contraire, il n'y a que pas beaucoup de gens qui pourrait réussir ce test. Dans ce cas, si vous vous réfléchissez étudier avec une bonne Q&A?

Aujourd'hui, c'est une société pleine de gens talentueux, la meilleure façon de suivre et assurer la place dans votre carrière est de s'améliorer sans arrêt. Si vous n'augmentez pas dans votre carrière, vous êtes juste sous-développé parce que les autres sont meilleurs que vous. Pour éviter ce cas, vous devez vous former successivement.

Code d'Examen: HP0-081
Nom d'Examen: HP (OpenVMS System Administration )
Questions et réponses: 146 Q&As

La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel HP HP0-081 peut vous assurer à réussir 100% le test HP HP0-081. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.

C'est pas facile à passer le test Certification HP HP0-081, choisir une bonne formation est le premier bas de réussir, donc choisir une bonne resource des informations de test HP HP0-081 est l'assurance du succès. Pass4Test est une assurance comme ça. Une fois que vous choisissez le test HP HP0-081, vous allez passer le test HP HP0-081 avec succès, de plus, un an de service en ligne après vendre est gratuit pour vous.

HP0-081 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-081.html

NO.1 After execution of the command: $ DEFINE/JOB LOGNAME SYS$LOGIN:MYFILE.DAT What
happens to the logical name LOGNAME?
A.It is visible to all processes in the same UIC group.
B.It is deassigned automatically on the next image exit.
C.It is placed into the process logical name table.
D.It is visible to all processes in this process tree.
Correct:D

certification HP   HP0-081   certification HP0-081

NO.2 Which statements about the swapfile are true? Select TWO.
A.The swapfile will be used by the modified page writer when the pagefile is full.
B.When a process is swapped out of memory, it is written to the swapfile.
C.The swapfile must exist on the boot device, and be at least the size of WSMAX.
D.The swapfile is optional, and may be installed on a disk other than the boot device.
E.The Swapper process writes pages from the modified page list to the swapfile.
Correct:B D

certification HP   HP0-081   certification HP0-081

NO.3 Which installation option performs a new installation on a disk?
A.CURRENT
B.OVERWRITE
C.INITIALIZE
D.PRESERVE
Correct:C

certification HP   HP0-081   certification HP0-081

NO.4 Assuming patch kit DEC-AXPVMS-VMS732_SYS-V0600--4.PCSI is the latest patch installed,
which statements are true? Select TWO.
A.PRODUCT ERASE * will remove all existing patches
B.PRODUCT UNDO will remove the patch if it was installed with the /SAVE_RECOVERY_DATA option.
C.@SYS$UPDATE:VMSINSTAL REMOVE will remove the patch if it was installed with the
/SAVE_RECOVERY_DATA option.
D.PRODUCT DELETE RECOVERY_DATA /ALL will erase any existing undo data.
E.PRODUCT REMOVE_UPDATE will remove the patch if it was installed with the
/SAVE_RECOVERY_DATA option.
Correct:B D

certification HP   HP0-081   certification HP0-081

NO.5 Which command or qualifier is used to display each line of a command procedure while it is
executing?
A.SET NOON
B.SET VERIFY
C.@procedure/VERIFY
D.@procedure/OUTPUT=file
Correct:B

certification HP   HP0-081   certification HP0-081

NO.6 Based on the message format, "%facility-s-identification, text", where "s" represents the
severity; what would a severity level of "E" represent?
A.The command may have performed some, but not all, of your request.
B.The output or program result is incorrect, but the system may attempt to continue execution.
C.The output or program result is incorrect. The system cannot continue to execute the request.
D.The system has performed your request. The message provides information about the process.
Correct:B

certification HP   HP0-081   certification HP0-081

NO.7 What is the purpose of security auditing?
A.prevent hackers from penetrating the system
B.analyze system usage and project future growth trends
C.analyze and record system use to detect attempts to compromise system security
D.gather system user statistics to enable system managers to charge for resource consumption
Correct:C

certification HP   HP0-081   certification HP0-081

NO.8 Click the Exhibit button. Which command clears this intrusion record?
A.DELETE /INTRUDER/RECORD=XARA/0003440121:SMITH
B.DELETE /INTRUSION_RECORD "XARA/0003440121:SMITH"
C.DELETE /INTRUSION_RECORD /SOURCE="XARA/0003440121:SMITH"
D.SET AUDIT /DELETE /INTRUSION_RECORD "XARA/0003440121:SMITH"
Correct:B

certification HP   HP0-081   certification HP0-081

NO.9 To what does the term "working set" refer?
A.processes that are currently residing in the system's balance set
B.virtual pages that are mapped by a process that is in the CUR state
C.virtual pages that are currently valid in the global page table
D.virtual pages that a process can access without generating a page fault
Correct:D

certification HP   HP0-081   certification HP0-081

NO.10 What is the lexical function used to return accounting, status, and identification information for
a process?
A.F$USER
B.F$GETJPI
C.F$GETJOB
D.F$PROCESS
Correct:B

certification HP   HP0-081   certification HP0-081

NO.11 To review all the audit events for a specific user, which command is used?
A.ANALYZE/AUDIT/FULL/SINCE=TODAY/USER=ADAMS
SYS$MANAGER:SECURITY.AUDIT$JOURNAL
B.ANALYZE/AUDIT/FULL/ACCOUNT=PAYROLL SYS$MANAGER:SECURITY.AUDIT$JOURNAL
C.ANALYZE/AUDIT/FULL/SELECT=PROCESS=NAME=ADAMS
SYS$MANAGER:SECURITY.AUDIT$JOURNAL
D.ANALYZE/AUDIT/FULL/SELECT=USERNAME=ADAMS
SYS$MANAGER:SECURITY.AUDIT$JOURNAL
Correct:D

certification HP   HP0-081   certification HP0-081

NO.12 What are benefits of VMS clustering? Select THREE.
A.non-stop processing
B.massively parallel computing
C.single security domain
D.transparent access to storage between HP-UX, OpenVMS, and Linux systems
E.shared storage across multiple systems
F.cross-node automatic process failover
G.high availability
Correct:C E G

certification HP   HP0-081   certification HP0-081

NO.13 Which command correctly terminates the AUDIT_SERVER process?
A.STOP AUDIT_SERVER
B.SET AUDIT /SERVER=FINAL_ACTION=CRASH
C.SET AUDIT /SERVER=EXIT
D.SHUTDOWN AUDIT_SERVER
Correct:C

certification HP   HP0-081   certification HP0-081

NO.14 Which command displays the LURT (License Unit Requirement Table) entry for an OpenVMS
node? There is more than one correct answer. Select ONE.
A.SHOW LICENSE /LURT
B.LICENSE LIST /TABLE
C.SHOW LICENSE /CHARGE_TABLE
D.LICENSE LIST /MINIMUM_UNITS
E.SHOW CPU /UNIT_REQUIREMENT
F.SHOW LICENSE /UNIT_REQUIREMENT
Correct:A B C D E F

certification HP   HP0-081   certification HP0-081

NO.15 By default, which file stores the system audit records?
A.SYS$MANAGER:OPERATOR.LOG
B.SYS$MANAGER:AUDIT_SERVER.AUDIT$JOURNAL
C.SYS$MANAGER:ACCOUNTNG.DAT
D.SYS$MANAGER:SECURITY.AUDIT$JOURNAL
Correct:D

certification HP   HP0-081   certification HP0-081

NO.16 Which statements are true regarding the default behavior of batch job log files? Select TWO.
A.created in the job owners' SYS$LOGIN directory
B.printed on queue SYS$PRINT and retained
C.printed on queue SYS$PRINT and deleted
D.given the same protection as the batch queue
E.created in the same directory as the command procedure
F.given the same protection as the batch procedure
Correct:A C

certification HP   HP0-081   certification HP0-081

NO.17 What is the command to specify that DECwindows client programs use node XARA as the
DECwindows server, running over DECnet protocol?
A.DEFINE DECW$DISPLAY XARA::
B.SET DISPLAY/CREATE/NODE=XARA
C.CREATE/DISPLAY/NODE=XARA/PROTOCOL=DECNET
D.SET DECWINDOWS/NODE=XARA/TRANSPORT=DECNET
Correct:B

certification HP   HP0-081   certification HP0-081

NO.18 VMScluster interconnects serve which purposes? Select TWO.
A.host systems accessing all physical devices and mailboxes
B.host systems accessing storage devices through the MSCP server
C.communication to the master node maintaining the Dedicated CPU Lock Manager
D.direct access to the master node's memory for the shared lock database
E.host systems in the cluster communicating with each other
Correct:B E

certification HP   HP0-081   certification HP0-081

NO.19 Which command deletes a logical name TROLL from the GROUP logical name table?
A.DELETE/LOGICAL TROLL
B.DEASSIGN/GROUP TROLL
C.DELETE/TABLE=GROUP TROLL
D.DEASSIGN/TABLE=GROUP TROLL
Correct:B

certification HP   HP0-081   certification HP0-081

NO.20 What is the difference between a buffered I/O (BIO) and a direct I/O (DIO)?
A.The user must provide a buffer to perform a BIO, but not for a DIO.
B.BIOs are substantially faster than DIOs, but consume more memory.
C.BIO data is copied to/from a system buffer before/after performing the I/O.
D.Most I/Os to terminals are DIOs; all I/Os to disks are BIOs.
Correct:C

certification HP   HP0-081   certification HP0-081

Certification HP HP0-081 est un des tests plus importants dans le système de Certification HP. Les experts de Pass4Test profitent leurs expériences et connaissances professionnelles à rechercher les guides d'étude à aider les candidats du test HP HP0-081 à réussir le test. Les Q&As offertes par Pass4Test vous assurent 100% à passer le test. D'ailleurs, la mise à jour pendant un an est gratuite.

没有评论:

发表评论