Le test simulation offert par Pass4Test est bien proche du test réel. Vous pouvez apprendre tous essences d'un test réel à courte terme avec l'aide de Pass4Test. Pass4Test peut vous assurer le succès 100% de test IFPUG I40-420.
Pass4Test a capacité d'économiser vos temps et de vous faire plus confiant à réussir le test. Vous pouvez télécharger le démo IFPUG I40-420 gratuit à connaître mieux la bonne fiabilité de Pass4Test. Nous nous font toujours confiant sur nos produits, et vous aussi dans un temps proche. La réussite de test IFPUG I40-420 n'est pas loin de vous une fois que vous choisissez le produit de Pass4Test. C'est un choix élégant pour vous faciliter à réussir le test IFPUG I40-420.
Pass4Test vous permet à réussir le test Certification sans beaucoup d'argents et de temps dépensés. La Q&A IFPUG I40-420 est recherchée par Pass4Test selon les résumés de test réel auparavant, laquelle est bien liée avec le test réel.
Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test IFPUG I40-420, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.
Le temps est tellement précieux dans cette société que une bonn façon de se former avant le test IFPUG I40-420 est très important. Pass4Test fait tous efforts à assurer tous les candidats à réussir le test. Aussi, un an de mise à jour est gratuite pour vous. Si vous ne passez pas le test, votre argent sera tout rendu.
Code d'Examen: I40-420
Nom d'Examen: IFPUG (Certified Function Point Specialist )
Questions et réponses: 249 Q&As
I40-420 Démo gratuit à télécharger: http://www.pass4test.fr/I40-420.html
NO.1 What is a (are) valid example(s) of code data?
A. Substitution data
B. Static data
C. Valid values
D. All of the above
Answer: D
certification IFPUG I40-420 I40-420 certification I40-420
NO.2 Which category (ies) of data entities is (are) usually identified to satisfy the Functional User
Requirements?
A. Business data
B. Reference data
C. Code data
D. Both A and B
Answer: D
IFPUG examen I40-420 certification I40-420 I40-420 certification I40-420
NO.3 What is an elementary process?
A. The smallest unit of activity that is meaningful to the developer
B. The largest unit of activity that is meaningful to the user
C. The smallest unit of activity that is meaningful to the user
D. The largest unit of activity that is meaningful to the developer
Answer: C
certification IFPUG I40-420 examen I40-420
NO.4 Which of the following is an attribute used to represent relationships of one entity to another.?
A. Primary key
B. Secondary key
C. Foreign key
D. Domestic key
Answer: C
IFPUG examen I40-420 I40-420
NO.5 What is a user identifiable group of logically related data or control information referenced by the
application, but maintained within the boundary of another application?
A. An ILF
B. An IIF
C. An EIF
D. An ELF
Answer: C
IFPUG examen certification I40-420 I40-420 I40-420
NO.6 Which of the following defines the purpose of a count?
A. Provides an answer to a business question, and it is the business question that determines the
purpose
B. Influences the positioning of the application between the software under review and the surrounding
software
C. Influences the type of FP count to answer the business problem under investigation
D. Provides an input to the estimation process needed to determine the level of effort required to develop
the first release of an application
Answer: A
IFPUG examen I40-420 I40-420 I40-420
NO.7 Which of the following statements about an External Input is true?
A. Has the primary intent to maintain one or more ILFs
B. An elementary process to hold data or control information from outside the boundary
C. Has the primary intent to alter the behavior of a transaction
D. Has the primary intent to reference one or more EIFs
Answer: A
IFPUG I40-420 I40-420
NO.8 An EI is defined as:
A. an elementary process that processes data sent from outside the application boundary
B. control information sent from outside the user view
C. an elementary process that processes data or control information sent from outside the application's
boundary
D. All of the above
Answer: C
IFPUG certification I40-420 I40-420 examen
NO.9 Which of the following statements regarding the counting scope is true?
A. It defines the set of Functional User Requirements to be included in the FP count
B. It always includes more than one application
C. It determines the purpose of the applications being counted
D. It defines a (sub) set of the modules being sized
Answer: A
certification IFPUG I40-420 certification I40-420 I40-420 examen
NO.10 Which of the following statements regarding functional size measurement is true?
A. Early functional size measurements can never change during design and coding phase
B. It is quite normal to identify additional functionality that was not specified in the original requirements in
the form of scope creep
C. It is not necessary to update the application functional size upon completion of an enhancement.
D. Both B and C
Answer: B
certification IFPUG certification I40-420 certification I40-420 I40-420
NO.11 Which of the following is NOT true of a boundary?
A. It encloses the logical data maintained by the application
B. It is the physical interface between the software under study and its users
C. It is dependent on the user's external business view of the application and is independent of technical
and/or implementation considerations
D. It defines what is external to the application
Answer: B
certification IFPUG certification I40-420 certification I40-420 certification I40-420
NO.12 Which of the following statements is (are) true regarding an application functional size (FS)?
A. It provides a measure of the functionalities that an application provides to the user
B. It is never updated after the initial application installation
C. It is associated with an application's lifecycle
D. Both A and C
Answer: D
certification IFPUG I40-420 I40-420 examen I40-420
NO.13 The primary intent of an EI is to maintain:
A. One or more ILFs or alter the behavior of the application
B. One or more ILFs
C. One or more EIFs or alter the behavior of the application
D. One or more EIFs
Answer: A
IFPUG examen I40-420 examen certification I40-420 I40-420 I40-420
NO.14 An example of the purpose of an FP count is to provide:
A. input to the estimation process needed to determine the level of effort to develop the first release of an
application
B. a comparison of functionality delivered by two different suppliers' packages
C. determine the size of an application as part of the organization's effort to determine the size of its
software portfolio
D. All of the above
Answer: D
IFPUG examen I40-420 certification I40-420 I40-420
NO.15 Which of the following is NOT an example of the purpose of a function point count?
A. To enable comparison of functionality delivered by two applications
B. To determine maintenance support cost per function point
C. To understand the percentage of lines of code that is being reused across three different applications
D. To determine the effort and duration of a development project
Answer: C
certification IFPUG certification I40-420 I40-420 examen I40-420
NO.16 "Requirements specifically requested by the user to complete an elementary process" defines which of
the following terms?
A. Control information
B. Processing logic
C. Maintain
D. User identifiable
Answer: B
IFPUG I40-420 examen I40-420
NO.17 When counting DETs which of the following rules apply?
A. Count a DET for each recursive field on the ILF or EIF
B. Count a DET for each piece of data in an ILF or EIF required by the user to establish a relationship with
another ILF or EIF
C. Count a DET for each repeating field that is identical in format
D. Count a DET for each field that appears more than once in an ILF or EIF
Answer: B
IFPUG I40-420 I40-420 examen
NO.18 Control information is defined as data that:
A. defines an elementary process of the application being counted
B. influences an elementary process of the application being counted
C. controls an elementary process of the application being counted
D. does not influence an elementary process of the application being counted
Answer: B
IFPUG I40-420 examen certification I40-420 I40-420
NO.19 What is true about conversion functionality?
A. Transactional or data functions provided to convert data and /or provide other user specified
conversion requirements
B. Exists only during the development or enhancement of an application
C. Conversion functionality is outside the scope of FP counting
D. Both A and B
Answer: D
certification IFPUG certification I40-420 I40-420 examen I40-420
NO.20 An application FP count is defined as:
A. a measure of the current functions the application provides the user
B. the initial development project FP count
C. an enhancement project that alters the applications functions
D. the activity of applying this International Standard to measure the functional size of an application
Answer: D
certification IFPUG certification I40-420 I40-420 examen I40-420 I40-420
Le test IFPUG I40-420 est le premier pas pour promouvoir dans l'Industrie IT, mais aussi la seule rue ramenée au pic de succès. Le test IFPUG I40-420 joue un rôle très important dans cette industrie. Et aussi, Pass4Test est un chaînon inevitable pour réussir le test sans aucune doute.
没有评论:
发表评论