Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification Microsoft 70-536. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.
Pour vous laisser savoir mieux que la Q&A Microsoft 70-536 produit par Pass4Test est persuadante, le démo de Q&A Microsoft 70-536 est gratuit à télécharger. Sous l'aide de Pass4Test, vous pouvez non seulement passer le test à la première fois, mais aussi économiser vos temps et efforts. Vous allez trouver les questions presque même que lesquels dans le test réel. C'est pourquoi tous les candidats peuvent réussir le test Microsoft 70-536 sans aucune doute. C'est aussi un symbole d'un meilleur demain de votre carrière.
Vous pouvez s'exercer en Internet avec le démo gratuit. Vous allez découvrir que la Q&A de Pass4Test est laquelle le plus complète. C'est ce que vous voulez.
La population de la Certification Microsoft 70-536 est très claire dans l'Industrie IT. Pass4Test se contribue à vous aider à réussir le test, de plus, un an de la mise à jour gratuite pendant est gratuite pour vous. Pass4Test sera le catalyseur de la réalisation de votre rêve. Pour le succès demain, Pass4Test est votre von choix. Vous serez le prochain talent de l'Indutrie IT sous l'aide de Pass4Test.
Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous serez confiant davantage sur Pass4Test après l'essai de démo. Vous allez réussir le test Microsoft 70-536 sans aucune doute si vous choisissez le Pass4Test.
Pass4Test est un site d'offrir la bonne Q&A Microsoft 70-536. Le produit offert par Pass4Test peut vous aider à réussir ce test très difficile. Si vous ajoutez le produit au panier, vous allez économiser le temps et l'effort. Le produiti Pass4Test est bien réputé dans l'Idustrie IT.
Code d'Examen: 70-536
Nom d'Examen: Microsoft (TS:MS.NET Framework 2.0-Application Develop Foundation)
Questions et réponses: 155 Q&As
Chaque expert dans l'équipe de Pass4Test ont son autorité dans cette industrie. Ils profitent ses expériences et ses connaissances professionnelles à préparer les documentations pour les candidats de test Certification IT. Les Q&As produites par Pass4Test ont une haute couverture des questions et une bonne précision des réponses qui vous permettent la réussie de test par une seule fois. D'ailleurs, un an de service gratuit en ligne après vendre est aussi disponible pour vous.
70-536 Démo gratuit à télécharger: http://www.pass4test.fr/70-536.html
NO.1 Your application uses two threads, named thread One and thread Two. You need to modify the code to
prevent the execution of thread One until thread Two completes execution.
What should you do?
A. Configure threadOne to run at a lower priority.
B. Configure threadTwo to run at a higher priority.
C. Use a WaitCallback delegate to synchronize the threads.
D. Call the Sleep method of threadOne.
E. Call the SpinLock method of threadOne.
Answer: C
Microsoft 70-536 examen 70-536 70-536
NO.2 You use Reflection to obtain information about a method named My Method. You need to ascertain
whether MyMethod is accessible to a derived class. What should you do.?
A. Call the IsAssembly property of the MethodInfo class.
B. Call the IsVirtual property of the MethodInfo class.
C. Call the IsStatic property of the MethodInfo class.
D. Call the IsFamily property of the MethodInfo class.
Answer: D
Microsoft 70-536 70-536 examen 70-536 examen certification 70-536
NO.3 You are developing an application to perform mathematical calculations. You develop a class named
CalculationValues. You write a procedure named PerformCalculation that operates on an instance of the
class.
You need to ensure that the user interface of the application continues to respond while calculations are
being performed. You need to write a code segment that calls the Perform Calculation procedure to
achieve this goal.
Which code segment should you use?
A. public ref class CalculationValues {...};
public ref class Calculator {
public :
void PerformCalculation(Object= values) {}
};
public ref class ThreadTest{
private :
void DoWork (){
CalculationValues= myValues = gcnew CalculationValues(); Calculator = calc = gcnew Calculator();
Thread= newThread = gcnew Thread(
gcnew ParameterizedThreadStart(calc,
&Calculator::PerformCalculation));
newThread->Start(myValues);
}
};
B. public ref class CalculationValues {...};
public ref class Calculator {
public :
void PerformCalculation() {}
};
public ref class ThreadTest{
private :
void DoWork (){
CalculationValues= myValues = gcnew CalculationValues(); Calculator = calc = gcnew Calculator();
ThreadStart= delStart = gcnew
ThreadStart(calc, &Calculator::PerformCalculation);
Thread= newThread = gcnew Thread(delStart);
if (newThread->IsAlive) {
newThread->Start(myValues);
}
}
};
C. public ref class CalculationValues {...};
public ref class Calculator {
public :
void PerformCalculation(CalculationValues= values) {} };
public ref class ThreadTest{
private :
void DoWork (){
CalculationValues= myValues = gcnew CalculationValues(); Calculator = calc = gcnew Calculator();
Application::DoEvents();
calc->PerformCalculation(myValues);
Application::DoEvents();
}
};
D. public ref class CalculationValues {...};
public ref class Calculator {
public :
void PerformCalculation() {}
};
public ref class ThreadTest{
private :
void DoWork (){
CalculationValues= myValues = gcnew CalculationValues(); Calculator = calc = gcnew Calculator();
Thread= newThread = gcnew Thread(
gcnew ThreadStart(calc, &Calculator::PerformCalculation)); newThread->Start(myValues);
}
};
Answer: A
Microsoft examen 70-536 certification 70-536
NO.4 You are creating a class that uses unmanaged resources. This class maintains references to managed
resources on other objects. You need to ensure that users of this class can explicitly release resources
when the class instance ceases to be needed. Which three actions should you perform? (Each correct
answer presents part of the solution. Choose three.)
A. Define the class such that it inherits from the WeakReference class.
B. Define the class such that it implements the IDisposable interface.
C. Create a class destructor that calls methods on other objects to release the managed resources.
D. Create a class destructor that releases the unmanaged resources.
E. Create a Dispose method that calls System.GC.Collect to force garbage collection.
F. Create a Dispose method that releases unmanaged resources and calls methods on other objects to
release the managed resources.
Answer: BDF
Microsoft 70-536 70-536 examen
NO.5 You write the following code:
public delegate void FaxDocs(object sender, FaxArgs args);
You need to create an event that will invoke FaxDocs. Which code segment should you use?
A. public static event FaxDocs Fax;
B. public static event Fax FaxDocs;
C. public class FaxArgs : EventArgs{
private string coverPageInfo;
public FaxArgs(string coverInfo)
{
this.coverPageInfo = coverPageInfo;
}
public string CoverPageInformation
{
get { return this.coverPageInfo; }
}
}
D. public class FaxArgs : EventArgs
{
private string coverPageInfo;
public string CoverPageInformation
{
get { return this.coverPageInfo; }
}
}
Answer: A
Microsoft examen 70-536 70-536 70-536
NO.6 You need to create a dynamic assembly named MyAssembly. You also need to save the assembly to
disk.
Which code segment should you use?
A. AssemblyName myAssemblyName =
new AssemblyName();
AssemblyBuilder myAssemblyBuilder =
AppDomain.CurrentDomain.DefineDynamicAssembly
(myAssemblyName, AssemblyBuilderAccess.RunAndSave);
myAssemblyBuilder.Save("MyAssembly.dll");
B. AssemblyName myAssemblyName =
new AssemblyName();
myAssemblyName.Name = "MyAssembly";
AssemblyBuilder myAssemblyBuilder =
AppDomain.CurrentDomain.DefineDynamicAssembly
(myAssemblyName, AssemblyBuilderAccess.Save);
myAssemblyBuilder.Save("MyAssembly.dll");
C. AssemblyName myAssemblyName =
new AssemblyName("MyAssembly");
AssemblyBuilder myAssemblyBuilder =
AppDomain.CurrentDomain.DefineDynamicAssembly
(myAssemblyName, AssemblyBuilderAccess.Save);
myAssemblyBuilder.Save("c:\\MyAssembly.dll");
D. AssemblyName myAssemblyName =
new AssemblyName();
myAssemblyName.Name = "MyAssembly";
AssemblyBuilder myAssemblyBuilder =
AppDomain.CurrentDomain.DefineDynamicAssembly
(myAssemblyName, AssemblyBuilderAccess.Run);
myAssemblyBuilder.Save("MyAssembly.dll");
Answer: B
certification Microsoft 70-536 70-536 examen 70-536 70-536
NO.7 You are developing a method to hash data with the Secure Hash Algorithm. The data is passed to your
method as a byte array named message. You need to compute the hash of the incoming parameter by
using SHA1. You also need to place the result into a byte array named hash. Which code segment should
you use?
A. SHA1 sha = new SHA1CryptoServiceProvider();
byte[] hash = null;
sha.TransformBlock(message, 0, message.Length, hash, 0);
B. SHA1 sha = new SHA1CryptoServiceProvider();
byte[] hash = BitConverter.GetBytes(sha.GetHashCode());
C. SHA1 sha = new SHA1CryptoServiceProvider();
byte[] hash = sha.ComputeHash(message);
D. SHA1 sha = new SHA1CryptoServiceProvider();
sha.GetHashCode();
byte[] hash = sha.Hash;
Answer: C
certification Microsoft certification 70-536 70-536 70-536 70-536 70-536 examen
NO.8 You are writing an application that uses SOAP to exchange data with other applications. You use a
Department class that inherits from ArrayList to send objects to another application. The Department
object is named dept.
You need to ensure that the application serializes the Department object for transport by using SOAP.
Which code should you use?
A. SoapFormatter formatter = new SoapFormatter();
byte[] buffer = new byte[dept.Capacity];
MemoryStream stream = new MemoryStream(buffer);
foreach (object o in dept)
{
formatter.Serialize(stream, o);
}
B. SoapFormatter formatter = new SoapFormatter();
byte[] buffer = new byte[dept.Capacity];
MemoryStream stream = new MemoryStream(buffer);
formatter.Serialize(stream, dept);
C. SoapFormatter formatter = new SoapFormatter();
MemoryStream stream = new MemoryStream();
foreach (object o in dept)
{
Formatter.Serialize(stream, o);
}
D. SoapFormatter formatter = new SoapFormatter();
MemoryStream stream = new MemoryStream();
formatter.Serialize(stream, dept);
Answer: D
Microsoft certification 70-536 certification 70-536 70-536
NO.9 You need to create a class definition that is interoperable along with COM.
You need to ensure that COM applications can create instances of the class and can call the GetAddress
method.
Which code segment should you use?
A. public class Customer{
string addressString;
public Customer(string address)
{
addressString = address;
}
public string GetAddress()
{
return addressString;
}
}
B. public class Customer {
static string addressString;
public Customer() { }
public static string GetAddress()
{
return addressString;
}
}
C. public class Customer {
string addressString;
public Customer() { }
public string GetAddress()
{
return addressString;
}
}
D. public class Customer {
string addressString;
public Customer() { }
internal string GetAddress()
{
return addressString;
}
}
Answer: C
Microsoft 70-536 70-536 certification 70-536
NO.10 You are developing an application that receives events asynchronously. You create a WqlEventQuery
instance to specify the events and event conditions to which the application must respond. You also
create a ManagementEventWatcher instance to subscribe to events matching the query. You need to
identify the other actions you must perform before the application can receive events asynchronously.
Which two actions should you perform?
(Each correct answer presents part of the solution. Choose two.)
A. Start listening for events by calling the Start method of the ManagementEventWatcher.
B. Set up a listener for events by using the EventArrived event of the ManagementEventWatcher.
C. Use the WaitForNextEvent method of the ManagementEventWatcher to wait for the events.
D. Create an event handler class that has a method that receives an ObjectReadyEventArgs parameter.
E. Set up a listener for events by using the Stopped event of the ManagementEventWatcher.
Answer: AB
certification Microsoft 70-536 70-536 examen 70-536 examen
NO.11 You are testing a newly developed method named PersistToDB. This method accepts a parameter of
type EventLogEntry. This method does not return a value. You need to create a code segment that helps
you to test the method. The code segment must read entries from the application log of local computers
and then pass the entries on to the PersistToDB method. The code block must pass only events of type
Error or Warning from the source MySource to the PersistToDB method.
Which code segment should you use?
A. EventLog myLog = new EventLog("Application", ".");
foreach (EventLogEntry entry in myLog.Entries)
{
if (entry.Source == "MySource")
{
PersistToDB(entry);
}
}
B. EventLog myLog = new EventLog("Application", ".");
myLog.Source = "MySource";
foreach (EventLogEntry entry in myLog.Entries)
{
if (entry.EntryType == (EventLogEntryType.Error & EventLogEntryType.Warning)) {
PersistToDB(entry);
}
}
C. EventLog myLog = new EventLog("Application", ".");
foreach (EventLogEntry entry in myLog.Entries)
{
if (entry.Source == "MySource")
{
if (entry.EntryType == EventLogEntryType.Error || entry.EntryType == EventLogEntryType.Warning)
{
PersistToDB(entry);
}
}
}
D. EventLog myLog = new EventLog("Application", ".");
myLog.Source = "MySource";
foreach (EventLogEntry entry in myLog.Entries)
{
if (entry.EntryType == EventLogEntryType.Error || entry.EntryType == EventLogEntryType.Warning)
{
PersistToDB(entry);
}
}
Answer: C
Microsoft examen certification 70-536 70-536 examen certification 70-536
NO.12 You are working on a debug build of an application. You need to find the line of code that caused an
exception to be thrown. Which property of the Exception class should you use to achieve this goal?
A. Data
B. Message
C. StackTrace
D. Source
Answer: C
Microsoft certification 70-536 70-536 70-536 examen
NO.13 You are writing a custom dictionary. The custom-dictionary class is named MyDictionary. You need to
ensure that the dictionary is type safe. Which code segment should you use?
A. class MyDictionary : Dictionary<string, string>
B. class MyDictionary : HashTable
C. class MyDictionary : IDictionary
D. class MyDictionary { ... }
Dictionary<string, string> t = new Dictionary<string, string>(); MyDictionary dictionary = (MyDictionary)t;
Answer: A
Microsoft 70-536 examen 70-536 examen 70-536
NO.14 You create an application to send a message by e-mail. An SMTP server is available on the local subnet.
The SMTP server is named smtp.contoso.com.
To test the application, you use a source address, me@contoso.com, and a target address,
you@contoso.com.
You need to transmit the e-mail message.
Which code segment should you use?
A. MailAddress addrFrom =
new MailAddress("me@contoso.com", "Me");
MailAddress addrTo =
new MailAddress("you@contoso.com", "You");
MailMessage message = new MailMessage(addrFrom, addrTo); message.Subject = "Greetings!";
message.Body = "Test";
SocketInformation info = new SocketInformation();
Socket client = new Socket(info);
System.Text.ASCIIEncoding enc =
new System.Text.ASCIIEncoding();
byte[] msgBytes = enc.GetBytes(message.ToString());
client.Send(msgBytes);
B. MailAddress addrFrom = new MailAddress("me@contoso.com"); MailAddress addrTo = new
MailAddress("you@contoso.com"); MailMessage message = new MailMessage(addrFrom, addrTo);
message.Subject = "Greetings!";
message.Body = "Test";
SmtpClient client = new SmtpClient("smtp.contoso.com"); client.Send(message);
C. string strSmtpClient = "smtp.contoso.com";
string strFrom = "me@contoso.com";
string strTo = "you@contoso.com";
string strSubject = "Greetings!";
string strBody = "Test";
MailMessage msg =
"A Composite Solution With Just One Click" - Certification Guaranteed 7 Microsoft 70-536 Exam
new MailMessage(strFrom, strTo, strSubject, strSmtpClient);
D. MailAddress addrFrom =
new MailAddress("me@contoso.com", "Me");
MailAddress addrTo =
new MailAddress("you@contoso.com", "You");
MailMessage message = new MailMessage(addrFrom, addrTo); message.Subject = "Greetings!";
message.Body = "Test";
message.Dispose();
Answer: B
certification Microsoft 70-536 70-536 examen certification 70-536 certification 70-536 70-536
NO.15 You are writing a method to compress an array of bytes. The array is passed to the method in a
parameter named document.
You need to compress the incoming array of bytes and return the result as an array of bytes.
Which code segment should you use?
A. MemoryStream strm = new MemoryStream(document);
DeflateStream deflate = new DeflateStream(strm,
CompressionMode.Compress);
byte[] result = new byte[document.Length];
deflate.Write(result,0, result.Length);
return result;
B. MemoryStream strm = new MemoryStream(document);
DeflateStream deflate = new DeflateStream(strm,
CompressionMode.Comress);
deflate.Write(document, 0, document.Length);
deflate.Close();
return strm.ToArray();
C. MemoryStream strm = new MemoryStream();
DeflateStream deflate = new DeflateStream(strm,
CompressionMode.Compress);
deflate.Write(document, 0, document.Length);
deflate.Close();
return strm.ToArray();
D. MemoryStream inStream = new MemoryStream(document);
DeflateStream deflate = new DeflateStream(inStream,
CompressionMode.Compress);
MemoryStream outStream = new MemoryStream();
int b;
while ((b = deflate.ReadByte()) != -1)
{
outStream.WriteByte((byte)b);
}
return outStream.ToArray();
Answer: C
Microsoft 70-536 examen 70-536 70-536
NO.16 You write the following code segment to call a function from the Win32 Application Programming
Interface (API) by using platform invoke.
string personName = "N?el";
string msg = "Welcome" + personName + "to club"!";
bool rc = User32API.MessageBox(0, msg, personName, 0);
You need to define a method prototype that can best marshal the string data.
Which code segment should you use?
A. [DllImport("user32", CharSet = CharSet.Ansi)]
public static extern bool MessageBox(int hWnd, String text, String caption, uint type);
}
B. [DllImport("user32", EntryPoint = "MessageBoxA", CharSet = CharSet.Ansi)] public static extern bool
MessageBox(int hWnd, [MarshalAs(UnmanagedType.
LPWStr)]
String text, [MarshalAs(UnmanagedType.LPWStr)]String caption, uint type); }
C. [DllImport("user32", CharSet = CharSet.Unicode)]
public static extern bool MessageBox(int hWnd, String text, String caption, uint type);
}
D. [DllImport("user32", EntryPoint = "MessageBoxA", CharSet = CharSet.Unicode)] public static extern
bool MessageBox(int hWnd, [MarshalAs(UnmanagedType.
LPWStr)]String text,
[MarshalAs(UnmanagedType.LPWStr)]String caption, uint type); }
Answer: C
Microsoft examen 70-536 70-536
NO.17 You are developing a custom-collection class. You need to create a method in your class. You need to
ensure that the method you create in your class returns a type that is compatible with the Foreach
statement. Which criterion should the method meet?
A. The method must return a type of either IEnumerator or IEnumerable.
B. The method must return a type of IComparable.
C. The method must explicitly contain a collection.
D. The method must be the only iterator in the class.
Answer: A
Microsoft examen 70-536 70-536 70-536 70-536 70-536 examen
NO.18 You are developing a method to hash data for later verification by using the MD5 algorithm. The data is
passed to your method as a byte array named message. You need to compute the hash of the incoming
parameter by using MD5. You also need to place the result into a byte array. Which code segment should
you use?
A. HashAlgorithm algo = HashAlgorithm.Create("MD5");
byte[] hash = algo.ComputeHash(message);
B. HashAlgorithm algo = HashAlgorithm.Create("MD5");
byte[] hash = BitConverter.GetBytes(algo.GetHashCode());
C. HashAlgorithm algo;
algo = HashAlgorithm.Create(message.ToString());
byte[] hash = algo.Hash;
D. HashAlgorithm algo = HashAlgorithm.Create("MD5");
byte[] hash = null;
algo.TransformBlock(message, 0, message.Length, hash, 0); "A Composite Solution With Just One Click"
- Certification Guaranteed 16 Microsoft 70-536 Exam
Answer: A
Microsoft certification 70-536 70-536 examen 70-536
NO.19 You are developing a custom event handler to automatically print all open documents. The event
handler helps specify the number of copies to be printed. You need to develop a custom event arguments
class to pass as a parameter to the event handler.
Which code segment should you use?
A. public class PrintingArgs
{
private int copies;
public PrintingArgs(int numberOfCopies)
{
this.copies = numberOfCopies;
}
public int Copies
{
get { return this.copies; }
}
}
B. public class PrintingArgs : EventArgs
{
private int copies;
public PrintingArgs(int numberOfCopies)
{
this.copies = numberOfCopies;
}
public int Copies
{
get { return this.copies; }
}
}
C. public class PrintingArgs
{
private EventArgs eventArgs;
public PrintingArgs(EventArgs ea)
{
this.eventArgs = ea;
}
public EventArgs Args
{
get { return eventArgs; }
}
}
D. public class PrintingArgs : EventArgs
{
private int copies;
}
Answer: B
Microsoft examen 70-536 70-536 70-536
NO.20 You are creating an assembly named Assembly1. Assembly1 contains a public method. The global
cache contains a second assembly named Assembly2. You must ensure that the public method is only
called from Assembly2. Which permission class should you use?
A. GacIdentityPermission
B. StrongNameIdentityPermission
C. DataProtectionPermission
D. PublisherIdentityPermission
"A Composite Solution With Just One Click" - Certification Guaranteed 6 Microsoft 70-536 Exam
Answer: B
Microsoft examen 70-536 examen 70-536 examen
Choisir le Pass4Test peut vous aider à réussir 100% le test Microsoft 70-536 qui change tout le temps. Pass4Test peut vous offrir les infos plus nouvelles. Dans le site de Pass4Test le servie en ligne est disponible toute la journée. Si vous ne passerez pas le test, votre argent sera tout rendu.
没有评论:
发表评论