Le test Microsoft 70-503-Csharp est l'un très improtant dans tous les tests de Certification Microsoft, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.
Beaucoup de travailleurs espèrent obtenir quelques Certificat IT pour avoir une plus grande space de s'améliorer. Certains certificats peut vous aider à réaliser ce rêve. Le test Microsoft 70-503-Csharp est un certificat comme ça. Mais il est difficile à réussir. Il y a plusieurs façons pour se préparer, vous pouvez dépenser plein de temps et d'effort, ou vous pouvez choisir une bonne formation en Internet. Pass4Test est un bon fournisseur de l'outil formation de vous aider à atteindre votre but. Selons vos connaissances à propos de Pass4Test, vous allez faire un bon choix de votre formation.
Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test Microsoft 70-503-Csharp.
Code d'Examen: 70-503-Csharp
Nom d'Examen: Microsoft (TS: MS.NET Frmwrk 3.5, Wndws Commun Fndtion App Dev)
Questions et réponses: 75 Q&As
Vous allez choisir Pass4Test après essayer une partie de Q&A Microsoft 70-503-Csharp (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification Microsoft 70-503-Csharp.
Le succès n'est pas loin de vous si vous choisissez Pass4Test. Vous allez obtenir le Certificat de Microsoft 70-503-Csharp très tôt. Pass4Test peut vous permettre à réussir 100% le test Microsoft 70-503-Csharp, de plus, un an de service en ligne après vendre est aussi gratuit pour vous.
Pour réussir le test Microsoft 70-503-Csharp demande beaucoup de connaissances professionnelles IT. Il n'y a que les gens qui possèdent bien les connaissances complètes à participer le test Microsoft 70-503-Csharp. Maintenant, on a les autres façons pour se former. Bien que vous n'ayez pas une connaissance complète maintenant, vous pouvez quand même réussir le test Microsoft 70-503-Csharp avec l'aide de Pass4Test. En comparaison des autres façons, cette là dépense moins de temps et de l'effort. Tous les chemins mènent à Rome.
70-503-Csharp Démo gratuit à télécharger: http://www.pass4test.fr/70-503-Csharp.html
NO.1 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 [ServiceContract(SessionMode=SessionMode.Required)]
02 public interface IOrderManager
03 {
04
05 void CloseOrder();
06 }
You need to decorate the operation as the method that closes the current session.
Which code segment should you insert at line 04?
A. [OperationContract(IsInitiating=false)]
B. [OperationContract(IsTerminating=true)]
C. [OperationContract]
[OperationBehavior(ReleaseInstanceMode=
ReleaseInstanceMode.AfterCall)]
D. [OperationContract(IsTerminating=false)]
[OperationBehavior(ReleaseInstanceMode=
ReleaseInstanceMode.AfterCall)]
Answer: B
certification Microsoft 70-503-Csharp 70-503-Csharp 70-503-Csharp
NO.2 }
NO.3 You are creating a Windows Communication Foundation (WCF) service by using Microsoft .NET
Framework 3.5.
You configure a binding to enable streaming.
You need to ensure that the client application is able to stream large XML files to the WCF service.
Which operation contract should you create?
A. [OperationContract]
void UploadFile(Stream xmlData);
B. [OperationContract]
void UploadFile(XmlWriter xmlData);
C. [OperationContract]
void UploadFile(StreamWriter xmlData);
D. [OperationContract]
void UploadFile(byte[] xmlData);
Answer: A
Microsoft examen 70-503-Csharp examen 70-503-Csharp
NO.4 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5. The service will be hosted in a managed Console application.
You want to add endpoints to the service.
You need to ensure that all endpoints use the same base address.
Which code fragment should you use?
A. [ServiceContract]
public interface IMortgageService {
public class MortgageService : IMortgageService {
Uri baseAddress=new Uri("http: //localhost:8888/MortgageService");
ServiceHost serviceHost=
new ServiceHost(typeof(MortgageService), new Uri[] {baseAddress });
serviceHost.AddServiceEndpoint(typeof(IMortgageService),
new BasicHttpBinding(), "");
serviceHost.Open();
B. [ServiceContract]
public interface IMortgageService {
public class MortgageService : IMortgageService {
Uri baseAddress=new Uri("http: //localhost:8888/MortgageService");
ServiceHost serviceHost=
new ServiceHost(typeof(MortgageService), new Uri[] {});
serviceHost.AddServiceEndpoint(typeof(IMortgageService),
new BasicHttpBinding(), baseAddress);
serviceHost.Open();
C. [ServiceContract]
public interface IMortgageService {
public class MortgageService : IMortgageService {
string baseAddress="http: //localhost:8888/MortgageService";
ServiceHost serviceHost=
new ServiceHost(typeof(MortgageService), new Uri[] { });
serviceHost.AddServiceEndpoint(typeof(IMortgageService),
new BasicHttpBinding(), baseAddress);
serviceHost.Open();
D. [ServiceContract(Namespace="http: //localhost:8888/MortgageService")]
public interface IMortgageService {
public class MortgageService : IMortgageService {
ServiceHost serviceHost=
new ServiceHost(typeof(MortgageService), new Uri[] { });
serviceHost.AddServiceEndpoint(typeof(IMortgageService),
new BasicHttpBinding(), "");
serviceHost.Open();
Answer: A
Microsoft 70-503-Csharp examen 70-503-Csharp 70-503-Csharp 70-503-Csharp
NO.5 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to ensure that the service can send data in the following format to the client applications.
<Account Id="">
<Name> </Name>
<Balance Currency=""> </Balance>
</Account>
Which code segment should you use?
A. [Serializable]
public class Account
{
[XmlAttribute]
public string Id;
[XmlElement]
public string Name;
[XmlAttribute]
public string Currency;
[XmlElement]
public double Balance;
}
B. [DataContract]
public class Account
{
[DataMember(Order=0)]
public string Id;
[DataMember(Order=1)]
public string Name;
[DataMember(Order=0)]
public double Balance;
[DataMember(Order=1)]
public string Currency;
}
C. [Serializable]
public class Account
{
[XmlAttribute]
public string Id;
public string Name;
[XmlElement("Balance")]
public BalanceVal Balance;
}
[Serializable]
public class BalanceVal
{
[XmlText]
public double Amount;
[XmlAttribute]
public string Currency;
}
D. [DataContract]
public class Account
{
[DataMember(Order=0)]
public string Id;
[DataMember(Order=1)]
public string Name;
[DataMember(Name="Balance", Order=2)]
public BalanceVal Balance;
}
[DataContract]
public struct BalanceVal
{
[DataMember(Order=0)]
public double Balance;
[DataMember(Order=1)]
public string Currency;
}
Answer: C
certification Microsoft 70-503-Csharp certification 70-503-Csharp 70-503-Csharp 70-503-Csharp examen
NO.6 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
The service contains the following code segment.
[DataContract]
public class Person
{
}
[DataContract]
public class Customer : Person
{
}
You need to create a service contract that meets the following requirements:
` The service contract must have an operation contract named GetPerson that returns an object of type
Person.
` The GetPerson operation must be able to return an object of type Customer.
Which code segment should you use?
A. [ServiceContract]
[ServiceKnownType("GetPerson")]
public interface IMyService
{
[OperationContract]
Person GetPerson();
}
B. [ServiceContract]
public interface IMyService
{
[OperationContract]
[ServiceKnownType("Customer")]
Person GetPerson();
}
C. [ServiceContract]
[ServiceKnownType(typeof(Customer))]
public interface IMyService
{
[OperationContract]
Person GetPerson();
}
D. [ServiceContract]
[ServiceKnownType("GetPerson",typeof(Customer))]
public interface IMyService
{
[OperationContract]
Person GetPerson();
}
Answer: C
certification Microsoft 70-503-Csharp 70-503-Csharp certification 70-503-Csharp certification 70-503-Csharp
NO.7 5. You have successfully created two interfaces: IMyService and IMyServiceClient.
You need to ensure that the service is able to call methods from the client application by using the
IMyServiceClient interface.
Which code segment should you use?
A. [ServiceContract(CallbackContract=typeof(IMyServiceClient))]
public interface IMyService
{
...
}
public interface IMyServiceClient
{
...
}
B. [ServiceContract(CallbackContract=typeof(IMyService))]
public interface IMyService
{
...
}
public interface IMyServiceClient
{
...
}
C. [ServiceContract(SessionMode=SessionMode.Allowed)]
[ServiceKnownType(typeof(IMyServiceClient))]
public interface IMyService : IMyServiceClient
{
...
}
public interface IMyServiceClient
{
...
}
D. [ServiceContract]
[ServiceKnownType(typeof(IMyServiceClient))]
public interface IMyService
{
...
}
[ServiceContract]
public interface IMyServiceClient : ICommunicationObject
{
...
}
Answer: A
Microsoft 70-503-Csharp 70-503-Csharp
3. You have created a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
The existing service interface is named IMyService, and contains the following code segment.
[ServiceContract(Name="SvcOrder", Namespace="http://contoso.com/services")]
public interface IMyService
{
[OperationContract]
void DoSomething();
}
You create a new service named IMyServiceV1 that contains an operation named DoSomethingElse.
You need to ensure that existing client applications are still able to access the IMyService.DoSomething
method without modifying client code.
Which code segment should you use?
A. [ServiceContract(Namespace="http:?//contoso.com/services/V1")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
B. [ServiceContract(Name="SvcOrder")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
C. [ServiceContract(Name="SvcOrderV1",
Namespace="http: //contoso.com/services")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
D. [ServiceContract(Name="SvcOrder",
Namespace="http: //contoso.com/services")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
Answer: D
certification Microsoft 70-503-Csharp 70-503-Csharp examen 70-503-Csharp examen 70-503-Csharp 70-503-Csharp
NO.8 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 Uri baseAddress=
02 new Uri ( http://localhost:8000/ExamService );
03 Uri mexAddress=new Uri("");
04 ServiceHost serviceHost=new ServiceHost(typeof(
05 ?ExamService), baseAddress);
06 ServiceMetadataBehavior smb=
07 serviceHost.Description.Behaviors.
08 Find<ServiceMetadataBehavior>();
09 if (smb != null)
10 {
11
12 }
13 else
14 {
15 smb=new ServiceMetadataBehavior();
16 serviceHost.Description.Behaviors.Add(smb);
NO.9 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You create the following service contract. (Line numbers are included for reference only.)
01 [ServiceContract]
02 public interface IMyService
03 {
04 [OperationContract]
05
06 List<string> GetData(int index);
07 }
You need to ensure that the GetData operation can be accessed by using the URI in the following
manner:
` GetData/1 for the index value 1
` GetData/2 for the index value 2
` .
` .
` GetData/n for the index value n
Which code segment should you insert at line 05?
A. [WebGet(UriTemplate="GetData/{index}",
?BodyStyle=WebMessageBodyStyle.Bare)]
B. [WebGet(UriTemplate="GetData index={index}",
?BodyStyle=WebMessageBodyStyle.Bare)]
C. [WebGet(UriTemplate="GetData/[index]",
?BodyStyle=WebMessageBodyStyle.Bare)]
D. [WebGet[UriTemplate="GetData index={index}",
?BodyStyle=WebMessageBodyStyle.Bare]]
Answer: A
Microsoft examen 70-503-Csharp examen certification 70-503-Csharp 70-503-Csharp examen
NO.10 smb.HttpGetUrl=mexAddress;
NO.11 You create a Windows Communication Foundation (WCF) service by using Microsoft .NET Framework
3.5.
The WCF service contains two operations named ProcessSimpleOrder and ProcessComplexOrder.
You need to expose the ProcessSimpleOrder operation to all the client applications. You also need to
expose the ProcessComplexOrder operation only to specific client applications.
Which code segment should you use?
A. [ServiceContract]
public interface IOrderManager
{
[OperationContract(Action="*")]
void ProcessSimpleOrder();
[OperationContract]
void ProcessComplexOrder();
}
B. [ServiceContract]
public interface IOrderManager
{
[OperationContract(Name="http: //contoso.com/Simple")]
void ProcessSimpleOrder();
[OperationContract(Name="http: //contoso.com/Complex")]
void ProcessComplexOrder();
}
C. [ServiceContract]
public interface ISimpleOrderManager
{
[OperationContract]
void ProcessSimpleOrder();
}
[ServiceContract]
public interface IComplexOrderManager: ISimpleOrderManager
{
[OperationContract]
void ProcessComplexOrder();
}
D. [ServiceContract]
public interface ISimpleOrderManager
{
[OperationContract(Name="http: //contoso.com/Simple")]
void ProcessSimpleOrder();
}
public interface IComplexOrderManager: ISimpleOrderManager
{
[OperationContract(Name="http: //contoso.com/Complex")]
void ProcessComplexOrder();
}
Answer: C
Microsoft examen 70-503-Csharp certification 70-503-Csharp 70-503-Csharp 70-503-Csharp
NO.12 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
You write the following code segment.
[ServiceContract]
public interface IMathService
{
[OperationContract]
int AddNumbers(int a, int b);
double AddNumbers(double a, double b);
}
You have not deployed the IMathService service.
You need to expose the AddNumbers (double a, double b) operation to the IMathService service contract.
Which code segment should you use?
A. [OperationContract]
int AddNumbers(int a, int b);
[OperationContract]
double AddNumbers(double a, double b);
B. [OperationContract(Name="AddInt")]
int AddNumbers(int a, int b);
[OperationContract(Name="AddDouble")]
double AddNumbers(double a, double b);
C. [OperationContract(Action="IMathService/AddInt")]
int AddNumbers(int a, int b);
[OperationContract(Action="IMathService/AddDouble")]
double AddNumbers(double a, double b);
D. [OperationContract(Action="AddInt/*")]
int AddNumbers(int a, int b);
[OperationContract(Action="AddDouble/*")]
double AddNumbers(double a, double b);
Answer: B
certification Microsoft 70-503-Csharp certification 70-503-Csharp 70-503-Csharp examen
NO.13 You create a Windows Communication Foundation (WCF) service by using Microsoft .NET Framework
3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 public interface IMyService
02 {
03
04 string ProcessString(string name);
05 }
You create a host for the WCF service. You also create a service endpoint at http://localhost:8080/service.
You add an instance of the HttpTransferEndPointBehavior class to the host.
You need to ensure that the ProcessString method can be invoked from a Web browser by using the URL
http://localhost:8080/service/process name=value
Which code segment should you insert at line 03?
A. [OperationContract(Name="process", Action="Get")]
B. [OperationContract(Name="process", Action="Post")]
C. [OperationContract]
[WebGet(UriTemplate = "process name={name}")]
D. [OperationContract]
[WebInvoke(UriTemplate = "process name={name}")]
Answer: C
Microsoft examen 70-503-Csharp 70-503-Csharp
NO.14 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You write the following code segment.
namespace MyServices
{
[ServiceContract()]
interface IManageOrders
{
...
}
}
The service metadata must be exposed at the relative address named meta.
You need to add an endpoint element to the app.config file of the service host.
Which code fragment should you add?
A. <endpoint address="meta" binding="wsHttpBinding"
contract="IManageOrders" />
B. <endpoint address="meta" binding="wsHttpBinding"
contract="MyServices.IMetadataExchange" />
C. <endpoint address="meta" binding="mexHttpBinding"
contract="IMetadataExchange" />
D. <endpoint address="meta" binding="mexHttpBinding"
contract="MyServices.IManageOrders" />
Answer: C
Microsoft 70-503-Csharp certification 70-503-Csharp
NO.15 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
You create the following service contract.
[ServiceContract]
public interface IMath
{
[OperationContract]
int Add(int num1, int num2);
}
You need to add an operation contract to perform the Add operation asynchronously.
Which operation contract should you use?
A. [OperationContract(AsyncPattern=true)]
IAsyncResult BeginAdd(int num1, int num2);
int EndAdd(IAsyncResult res);
B. [OperationContract]
int BeginAdd(int num1, int num2, AsyncCallback cb, object state);
IAsyncResult EndAdd();
C. [OperationContract]
IAsyncResult BeginAdd(int num1, int num2);
[OperationContract]
int EndAdd(IAsyncResult res);
D. [OperationContract(AsyncPattern=true)]
IAsyncResult BeginAdd(int num1, int num2, AsyncCallback cb, object
state);
int EndAdd(IAsyncResult res);
Answer: D
certification Microsoft 70-503-Csharp 70-503-Csharp 70-503-Csharp 70-503-Csharp 70-503-Csharp
NO.16 When you browse to the base address of the service, you receive the following message: "Metadata
publishing for this service is currently disabled."
You debug the code and discover that the ServiceMetadataBehavior behavior was previously nonexistent.
You need to enable metadata publishing.
What should you do?
A. Delete lines 15 and 16.
B. Modify the code segment at line 03 in the following manner.
Uri mexAddress=new Uri("/service");
C. Insert the following code segment at line 11.
smb.HttpGetEnabled=true;
D. Insert the following code segment at line 19.
smb.HttpGetEnabled=true;
Answer: D
certification Microsoft certification 70-503-Csharp 70-503-Csharp 70-503-Csharp
17. You are creating an endpoint for a Windows Communication Foundation service by using
Microsoft .NET Framework 3.5. You create the endpoint by using a custom binding.
You write the following code segment.
BasicHttpBinding binding=new BasicHttpBinding();
binding.Security.Message.ClientCredentialType=
?BasicHttpMessageCredentialType.Certificate;
binding.Security.Mode=BasicHttpSecurityMode.Message;
CustomBinding cb=new CustomBinding(binding);
BindingElementCollection bec=cb.CreateBindingElements();
You need to prevent the custom binding from making a persistent connection to the service endpoint.
Which code segment should you use?
A. cb.SendTimeout=TimeSpan.Zero;
B. binding.ReceiveTimeout=TimeSpan.Zero;
C. foreach (BindingElement bindingElement in bec)
{
HttpTransportBindingElement element=
(HttpTransportBindingElement) bindingElement;
element.KeepAliveEnabled=false;
}
D. foreach (BindingElement be in bec)
{
if (be is HttpTransportBindingElement)
{
HttpTransportBindingElement httpElement=
(HttpTransportBindingElement)be;
httpElement.KeepAliveEnabled=false;
}
}
Answer: D
Microsoft 70-503-Csharp examen 70-503-Csharp 70-503-Csharp 70-503-Csharp
18. You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
The service will receive notification messages from client applications by using a number of transports,
including HTTP, TCP, MSMQ, and others.
You need to ensure that all client applications can send notification messages to the service.
Which service contract should you use?
A. [ServiceContract]
public interface INotificationService {
[OperationContract(AsyncPattern=true)]
void LogMessage(string message);
}
B. [ServiceContract]
public interface INotificationService {
[OperationContract(ReplyAction="none")]
void LogMessage(string message);
}
C. [ServiceContract]
public interface INotificationService {
[OperationContract(IsOneWay=true)]
void LogMessage(string message);
}
D. [ServiceContract]
public interface INotificationService {
[OperationContract(IsTerminating=true)]
void LogMessage(string message);
}
Answer: C
Microsoft examen certification 70-503-Csharp 70-503-Csharp
19. You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
The service will be hosted in a Console application.
You need to configure the service by using a configuration file other than the default app.config file.
Which code segment should you use?
A. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected override void InitializeRuntime()
{
//Load configuration here
}
}
B. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected override void ApplyConfiguration()
{
//Load configuration here
}
}
C. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected new void InitializeDescription(Type serviceType,
UriSchemeKeyedCollection baseAddresses)
{
//Load configuration here.
}
}
D. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected new void AddBaseAddress(Uri baseAddress)
{
//Load configuration here.
}
}
Answer: B
Microsoft examen 70-503-Csharp examen 70-503-Csharp 70-503-Csharp
NO.17 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to ensure that data sent in a SOAP header is in the following XML format.
<Data>
<string>String 1</string>
<string>String 2</string>
<string>String 3</string>
</Data>
Which code segment should you use?
A. [MessageContract]
public class MyMessage
{
[MessageHeader]
public string[] Data;
}
B. [MessageContract]
public class MyMessage
{
[MessageHeaderArray]
public string[] Data;
}
C. [MessageContract]
public class MyMessage
{
[MessageProperty]
public string[] Data;
}
D. [MessageContract]
public class MyMessage
{
[MessageBodyMember (Order=0)]
public string[] Data;
}
Answer: A
Microsoft examen 70-503-Csharp examen certification 70-503-Csharp
NO.18 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to programmatically add the following endpoint definition to the service.
http://localhost:8000/ExamService/service
Which code segment should you use?
A. String baseAddress="http: //localhost:8000/ExamService";
BasicHttpBinding binding1=new BasicHttpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
B. String baseAddress="http: //localhost:8000/ExamService/service";
BasicHttpBinding binding1=new BasicHttpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
C. String baseAddress="http: //localhost:8000/ExamService";
WsHttpBinding binding1=new WsHttpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
D. String baseAddress="net.tcp: //localhost:8000/ExamService/service";
NetTcpBinding binding1=new NetTcpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
Answer: B
Microsoft examen 70-503-Csharp 70-503-Csharp
NO.19 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
NO.20 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5. The service will expose a method named DoProcess to the client applications.
You write the following code segment. (Line numbers are included for reference only.)
01 [ServiceContract]
02 public interface IMyService
03 {
04
05 }
You need to ensure that the client applications are not required to obtain results from the DoProcess
method.
Which code segment should you insert at line 04?
A. [OperationContract(IsOneWay=true)]
bool DoProcess();
B. [OperationContract(IsOneWay=true)]
void DoProcess();
C. [OperationContract(AsyncPattern=false)]
bool DoProcess();
D. [OperationContract(AsyncPattern=false)]
void DoProcess();
Answer: B
certification Microsoft 70-503-Csharp 70-503-Csharp certification 70-503-Csharp
Le test Microsoft 70-503-Csharp est très important dans l'Industrie IT, tous les professionnels le connaîssent ce fait. D'ailleur, c'est difficile à réussir ce test, toutefois le test Microsoft 70-503-Csharp est une bonne façon à examiner les connaissances professionnelles. Un gens avec le Certificat Microsoft 70-503-Csharp sera apprécié par beaucoup d'entreprises. Pass4Test est un fournisseur très important parce que beaucoup de candidats qui ont déjà réussi le test preuvent que le produit de Pass4Test est effectif. Vous pouvez réussir 100% le test Microsoft 70-503-Csharp avec l'aide de Pass4Test.
没有评论:
发表评论