Pass4Test est un site de vous ramener au succès. Pass4Test peut vous aider à promouvoir les connaissances essentielles pour le test Microsoft 070-410 et passer le test à la première fois.
Le programme de formation Microsoft 070-410 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.
Dépenser assez de temps et d'argent pour réussir le test Microsoft 070-410 ne peut pas vous assurer à passer le test Microsoft 070-410 sans aucune doute. Choisissez le Pass4Test, moins d'argent coûtés mais plus sûr pour le succès de test. Dans cette société, le temps est tellement précieux que vous devez choisir un bon site à vous aider. Choisir le Pass4Test symbole le succès dans le future.
070-410 est un test de Microsoft Certification, donc réussir 070-410 est le premier pas à mettre le pied sur la Certifiction Microsoft. Ça peut expliquer certiainement pourquoi le test Microsoft 070-410 devient de plus en plus chaud, et il y a de plus en plus de gens qui veulent participer le test 070-410. Au contraire, il n'y a que pas beaucoup de gens qui pourrait réussir ce test. Dans ce cas, si vous vous réfléchissez étudier avec une bonne Q&A?
Aujourd'hui, c'est une société pleine de gens talentueux, la meilleure façon de suivre et assurer la place dans votre carrière est de s'améliorer sans arrêt. Si vous n'augmentez pas dans votre carrière, vous êtes juste sous-développé parce que les autres sont meilleurs que vous. Pour éviter ce cas, vous devez vous former successivement.
Si vous vous inscriez le test Microsoft 070-410, vous devez choisir une bonne Q&A. Le test Microsoft 070-410 est un test Certification très important dans l'Industrie IT. C'est essentielle d'une bonne préparation avant le test.
Code d'Examen: 070-410
Nom d'Examen: Microsoft (Installing and Configuring Windows Server 2012)
Questions et réponses: 143 Q&As
070-410 Démo gratuit à télécharger: http://www.pass4test.fr/070-410.html
NO.1 Your network contains an Active Directory domain named adatum.com.The domain contains
three
domain controllers.The domain controllers are configured as shown in the following table.
DC3 loses network connectivity due to a hardware failure.You plan to remove DC3 from the
domain.You
log on to DC3.You need to identify which service location (SRV) records are registered by DC3.What
should you do?
A.Open the %windir%\system32\dns\backup\adatum.com.dns file.
B.Open the %windir%\system32\config\netlogon.dns file.
C.Run ipconfig /displaydns.
D.Run dcdiag /test:dns.
Answer: B
certification Microsoft 070-410 examen 070-410 070-410 examen
NO.2 Your network contains a file server named Server1 that runs Windows Server 2012.All client
computers
run Windows 8.You need to ensure that when users are connected to the network, they always use
local
offline files that are cached from Server1.Which Group Policy setting should you configure?
A.Turn on economical application of administratively assigned Offline Files.
B.Configure slow-link mode.
C.Configure Slow link speed.
D.Enable file synchronization on costed networks.
Answer: B
Microsoft examen 070-410 070-410
NO.3 You have a server named Server1 that runs Windows Server 2012.You need to remove
Windows
Explorer, Windows Internet Explorer, and all related components and files from Server1.What
should you
run on Server1?
A.msiexec.exe /uninstall iexplore.exe /x
B.msiexec.exe /uninstall explorer.exe /x
C.Uninstall-WindowsFeature Server-Gui-Shell -Remove
D.Uninstall-WindowsFeature Server-Gui-Mgmt-Infra -Remove
Answer: C
Microsoft 070-410 070-410 certification 070-410
NO.4 You have a server that runs Windows Server 2012.The disks on the server are configured as shown
in the
exhibit.(Click the Exhibit button.) You need to create a storage pool that contains Disk 1 and Disk
2.What
should you do first?
A.Convert Disk 1 and Disk 2 to dynamic disks.
B.Delete volume E.
C.Convert Disk 1 and Disk 2 to GPT disks.
D.Create a volume on Disk 2.
Answer: B
Microsoft 070-410 examen certification 070-410 070-410 examen 070-410 examen
NO.5 You have a server named Server1 that runs Windows Server 2012.Server1 has the Hyper-V
server role
installed.Server1 is connected to two Fibre Channel SANs and is configured as shown in the
following
table.
You have a virtual machine named VM1.You need to configure VM1 to connect to SAN1.What
should you
do first?
A.Configure network adapter teaming.
B.Create a Virtual Fibre Channel SAN.
C.Create a Hyper-V virtual switch.
D.Add one HBA.
Answer: B
Microsoft examen certification 070-410 070-410 examen 070-410
NO.6 Your network contains an Active Directory domain named adatum.com.The computer
accounts for allmember servers are located in an organizational unit (OU) named Servers.You link a
Group Policy object(GPO) to the Servers OU.You need to ensure that the domain s Backup Operators
group is a member of the local Backup Operators group on each member server.The solution must
not remove any groups from the local Backup Operators groups.What should you do?
A.Add a restricted group named Backup Operators.Add adatum\Backup Operators to the This group
is a
member of list.
B.Add a restricted group named Backup Operators.Add adatum\Backup Operators to the Members
of this
group list.
C.Add a restricted group named adatum\Backup Operators.Add Backup Operators to the This group
is a
member of list.
D.Add a restricted group named adatum\Backup Operators.Add Backup Operators to the Members
of this
group list.
Answer: C
certification Microsoft 070-410 070-410 certification 070-410
NO.7 Your network contains an Active Directory domain named adatum.com.The domain contains
several
thousand member servers that run Windows Server 2012.All of the computer accounts for the
member
servers are in an organizational unit (OU) named ServersAccounts.Servers are restarted only
occasionally.You need to identify which servers were restarted during the last two days.What should
you
do?
A.Run dsquery serverand specify the oparameter.
B.Run Get-ADComputerand specify the SearchScopeparameter.
C.Run Get-ADComputerand specify the lastLogonproperty.
D.Run dsquery computerand specify the stalepwdparameter.
Answer: C
Microsoft 070-410 certification 070-410 070-410 examen 070-410
NO.8 You install Windows Server 2012 on a standalone server named Server1.You configure Server1
as a VPN server.You need to ensure that client computers can establish PPTP connections to
Server1.Which two firewall rules should you create? (Each correct answer presents part of the
solution.Choose two.)
A.an inbound rule for TCP port 1723
B.an inbound rule for protocol 47
C.an inbound rule for TCP port 1701
D.an outbound rule for TCP port 1723
E.an outbound rule for protocol 47
F.an outbound rule for TCP port 1701
Answer: AB
Microsoft 070-410 certification 070-410 certification 070-410 070-410 examen
NO.9 Note: This question is part of a series of questions that use the same or similar answer
choices.An
answer choice may be correct for more than one question in the series.Each question is
independent of
the other questions in this series.Information and details provided in a question apply only to that
question.Your network contains a server named Server1 that runs Windows Server 2012.Server1
has the
Hyper-V server role installed.Server1 hosts four virtual machines named VM1, VM2, VM3, and
VM4.Server1 is configured as shown in the following table.
You install a network monitoring application on VM2.You need to ensure that all of the traffic sent
to VM3
can be captured on VM2.What should you configure?
A.the startup order
B.Processor Compatibility
C.resource metering
D.Resource control
E.Port mirroring
F.Virtual Machine Chimney
G.Integration Services
H.Automatic Start Action
I.the VLAN ID
J.Single-root I/O virtualization
K.NUMA topology
Answer: E
Microsoft 070-410 examen 070-410
NO.10 Your network contains an Active Directory domain named contoso.com.You log on to a domain
controller
by using an account named Admin1.Admin1 is a member of the Domain Admins group.You view the
properties of a group named Group1 as shown in the exhibit.(Click the Exhibit button.) Group1 is
located
in an organizational unit (OU) named OU1.You need to ensure that users from Group1 can modify
the
Security settings of OU1 only.What should you do from Active Directory Users and Computers?
A.Modify the Security settings of Group1.
B.Modify the Managed By settings on OU1.
C.Right-click contoso.com and select Delegate Control.
D.Right-click OU1 and select Delegate Control.
Answer: D
Microsoft 070-410 070-410
Pass4Test est un seul site de provider le guide d'étude Microsoft 070-410 de qualité. Peut-être que vous voyiez aussi les Q&A Microsoft 070-410 dans autres sites, mais vous allez découvrir laquelle est plus complète. En fait, Pass4Test est aussi une resource de Q&A pour les autres site web.
没有评论:
发表评论