Pass4Test offre une formation sur Motorola Solutions MSC-241 matériaux examen

Le test de Certification Motorola Solutions MSC-241 devient de plus en plus chaud dans l'Industrie IT. En fait, ce test demande beaucoup de travaux pour passer. Généralement, les gens doivent travailler très dur pour réussir.

Le test Motorola Solutions MSC-241 est le premier pas pour promouvoir dans l'Industrie IT, mais aussi la seule rue ramenée au pic de succès. Le test Motorola Solutions MSC-241 joue un rôle très important dans cette industrie. Et aussi, Pass4Test est un chaînon inevitable pour réussir le test sans aucune doute.

Le guide d'étude sorti de Pass4Test comprend les expériences résumées par nos experts, les matériaux et les Q&As à propos de test Certification Motorola Solutions MSC-241. Notre bonne réputation dans l'industrie IT sera une assurance 100% à réussir le test Motorola Solutions MSC-241. Afin de vous permettre de choisir Pass4Test, vous pouvez télécharger gratuitement le démo de Q&A tout d'abord.

Pass4Test peut non seulement vous aider à réussir votre rêve, mais encore vous offre le service gratuit pendand un an après vendre en ligne. Q&A offerte par l'équipe de Pass4Test vous assure à passer 100% le test de Certification Motorola Solutions MSC-241.

Code d'Examen: MSC-241
Nom d'Examen: Motorola Solutions (Design and Deploy for MOTOTRBO Solutions EMEA)
Questions et réponses: 108 Q&As

MSC-241 Démo gratuit à télécharger: http://www.pass4test.fr/MSC-241.html

NO.1 On which type of channel in an IP Site Connect system are Transmit Interrupt features
supported
in repeater firmware releases R01.08.00 and higher?
A. Wide Area Slots only
B. Local Area Slots only
C. Both Wide and Local Area slots
D. Noneoftheabove
Answer: D

Motorola Solutions   MSC-241   certification MSC-241

NO.2 A Capacity Plus system consists of three (3) repeaters with repeater one (1) the master and
repeaters two (2) and three (3) as peers. On the 24th of May, there is a lighting strike at the site
and the building lost power, causing the three repeaters to revert to DC power. The design of the
site called for just the repeaters to be battery backed. However the next morning the customer
calls and reports that a number of talkgroups are getting busy tones (engaged), yet other groups
are seeing no busy tones (engaged) on the system. Which of the following statements BEST
describe the issue?
A. The master has gone down and taken the rest of the Capacity Plus network with it.
B. The peers use DHCP and were not able to connect to the master and refresh their peer list and
went off the Capacity Plus network as their leases expired.
C. The switch was not on battery backup and there are no LAN connections on the Capacity Plus
system, each of the repeaters are now operating as three (3) independent Capacity Plus systems.
D. The peers use DHCP and were not able to connect to the master and refresh their peer list.
The dealer should have used static IP addresses throughout.
Answer: C

Motorola Solutions examen   MSC-241   MSC-241

NO.3 Which of the following are TRUE statements about operating a MOTOTRBO repeater in a
Capacity Plus configuration?
A. One of its logical channels can work in trunked mode and the other logical channel can work in
data revert mode.
B. Both logical channels can work in trunked mode.
C. Both logical channels can work in data revert mode.
D. Only A & B are true (C is false)
E. Only B & C are true (A is false)
F. A, B, & C are true
Answer: F

Motorola Solutions   MSC-241   MSC-241 examen   MSC-241

NO.4 What will Enhanced Channel Access improve?
A. The amount of GPS updates that can be sent on a data revert channel
B. The amount of time from when PTT is pressed until voice is sent
C. Call success rate
D. Call setup time
Answer: C

Motorola Solutions   MSC-241   MSC-241   MSC-241

NO.5 You are looking to optimize battery life of radios that are close to the base station. Which is
the
most likely parameter for optimizing the battery life of a radio for a Capacity Plus system?
A. Beacon interval
B. Beacon duration
C. High power mode in Radio
D. Low power mode in Radio
Answer: D

Motorola Solutions   certification MSC-241   certification MSC-241   MSC-241

NO.6 A Capacity Plus system consists of three (3) repeaters with repeater one (1) the master and
repeaters two (2) and three (3) as peers. The dealer needs to make a simple change in repeater
two (2) and utilize IP repeater programming (IRP) to access the repeater remotely. A couple of
days later the customer calls and complains about users getting system busy tones (engaged
tones).
The dealer attempts to connect an RDAC remotely to the system with no success. He has verified
he can communicate to the router at the site.
Which of the following statements BEST describes the issue?
A. The master has gone down and taken the rest of the Capacity Plus network with it.
B. The master has gone down and the system is operating on just two (2) repeaters.
C. There is RF interference on the channel and the master repeater is unable to communicate to
the peers.
D. The peers are using DHCP and are not able to connect to the master and refresh their peer list.
The system is operating on just the master.
Answer: B

Motorola Solutions examen   MSC-241 examen   MSC-241   MSC-241   MSC-241   MSC-241

NO.7 Which of the following are TRUE statements about operating a MOTOTRBO repeater in an IP
Site
Connect configuration?
A. One of its logical channels can work in IP Site Connect mode (over wide area) and the other
logical channel can work in digital repeater mode (single site over local area).
B. Both logical channels can work in digital repeater mode (single site over local area).
C. Both logical channels can work in IP Site Connect mode (over wide area).
D. Only A and B are true (C is false).
E. Only A and C are true (B is false).
F. A, B, and C are true.
Answer: F

Motorola Solutions examen   certification MSC-241   MSC-241   MSC-241   certification MSC-241

NO.8 A MOTOTRBO repeater is connected to a Zetron Model 35 Telephone Interconnect. If a
telephone
user dials the Telephone Interconnect number, they get a busy signal (engaged tone). If a radio
user dials any telephone number, they don’t hear the ringing tone, only silence. Upon visiting the
site, you find that when a radio user dials, the relay click can be heard from the Zetron Model 35.
Unplugging the RJ11 and dialing the Telephone Interconnect, still results in a busy signal
(engaged tone). With this information, what do you think could be wrong?
A. The Zetron Model 35 may be faulty.
B. The Zetron Model 35 has probably not been configured for the phone line Ringer Equivalence
Number (REN).
C. The RJ11 cable may have a short circuit or there is a short circuit somewhere between the site
and the exchange.
D. The repeater interface cable to the Zetron Model 35 is faulty.
Answer: C

Motorola Solutions   MSC-241 examen   certification MSC-241   MSC-241

NO.9 Which of the following antennas is BEST suited for providing coverage inside a tall building?
A. 4 element Yagi
B. Radiating coaxial cable
C. End-fed half-wave antenna
D. High gain collinear antenna
Answer: B

Motorola Solutions   MSC-241 examen   MSC-241 examen   MSC-241

NO.10 What changes are required to the Master Repeater in an IP Site Connect system when a new
peer
is added to the system?
A. Both the IP address and port number of the new repeater must be configured into the Master
Repeater.
B. The address of the new peer must be configured into the Master Repeater.
C. The port of the new peer must be configured into the Master Repeater.
D. No changes are required to the Master Repeater.
Answer: D

certification Motorola Solutions   MSC-241   MSC-241 examen

Le test Certificat Motorola Solutions MSC-241 est bien populaire pendant les professionnels IT. Ce Certificat est une bonne preuve de connaissances et techniques professionnelles. C'est une bonne affaire d'acheter une Q&A de qualité coûtant un peu d'argent. Le produit de Pass4Test vise au test Certification Motorola Solutions MSC-241. Vous allez prendre toutes essences du test Motorola Solutions MSC-241 dans une courte terme.

Dernières Motorola Solutions MSC-331 de la pratique de l'examen questions et réponses téléchargement gratuit

Pass4Test est un fournisseur de formation pour une courte terme, et Pass4Test peut vous assurer le succès de test Motorola Solutions MSC-331. Si malheureusement, vous échouez le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit avant de choisir Pass4Test. Au moment là, vous serez confiant sur Pass4Test.

Pass4Test a une équipe se composant des experts qui font la recherche particulièrement des exercices et des Q&As pour le test certification Motorola Solutions MSC-331, d'ailleurs ils peuvent vous proposer à propos de choisir l'outil de se former en ligne. Si vous avez envie d'acheter une Q&A de Pass4Test, Pass4Test vous offrira de matériaux plus détailés et plus nouveaux pour vous aider à approcher au maximum le test réel. Assurez-vous de choisir le Pass4Test, vous réussirez 100% le test Motorola Solutions MSC-331.

Pass4Test est un site d'offrir l'outil de formation convenable pour les candidats de test Certification IT. Le produit de Pass4Test peut aider les candidats à économiser les temps et les efforts. L'outil de formation est bien proche que test réel. Vous allez réussir le test 100% avec l'aide de test simulation de Pass4Test. C'est une bonne affaire à prendre le Certificat IT en coûtant un peu d'argent. N'hésitez plus d'ajouter l'outil de formation au panier.

Le test Motorola Solutions MSC-331 est l'un très improtant dans tous les tests de Certification Motorola Solutions, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.

On peut voir que beaucoup de candidats ratent le test Motorola Solutions MSC-331 quand même avec l'effort et beaucoup de temps dépensés. Cest une bonne preuve que le test Motorola Solutions MSC-331 est difficile à réussir. Pass4Test offre le guide d'étude bien fiable. Sauf le test Motorola Solutions MSC-331, Pass4Test peut offrir les Q&As des autres test Certification IT.

Pass4Test vous promet de vous aider à passer le test Motorola Solutions MSC-331, vous pouvez télécharger maintenant les Q&As partielles de test Motorola Solutions MSC-331 en ligne. Il y a encore la mise à jour gratuite pendant un an pour vous. Si vous malheureusement rater le test, votre argent sera 100% rendu.

Après une longue attente, les documentations de test Motorola Solutions MSC-331 qui combinent tous les efforts des experts de Pas4Test sont finalement sorties. Les documentations de Pass4Test sont bien répandues pendant les candidats. L'outil de formation est réputée par sa haute précision et grade couverture des questions, d'ailleurs, il est bien proche que test réel. Vous pouvez réussir le test Motorola Solutions MSC-331 à la première fois.

Code d'Examen: MSC-331
Nom d'Examen: Motorola Solutions (Designing and Deploying Mobile Computing Solutions)
Questions et réponses: 69 Q&As

MSC-331 Démo gratuit à télécharger: http://www.pass4test.fr/MSC-331.html

NO.1 The design phase of the pilot is an area that is often neglected. Which of the following is NOT
true regarding the design phase?
A. The best time to influence a pilot's trustworthy design is at pilot completion.
B. The design phase typically relies on information gathered from the planning phase.
C. Good pilot design should ensure or facilitate a framework for periodic project evaluation.
D. During the design phase you establish best practices to follow for this phase by way of functional
and design specifications, and you perform risk analysis to identify threats and vulnerabilities in
your pilot.
Answer: A

certification Motorola Solutions   certification MSC-331   MSC-331 examen

NO.2 The Enterprise Mobility Developers Kit (EMDK) for .NET allows Microsoft: .NET Compact
Framework developers to programmatically access the enterprise mobility features on the devices.
This developer kit is designed for use with all of the following versions of Microsoft Visual Studio
EXCEPT:
A. Microsoft Visual Studio 2003
B. Microsoft Visual Studio 2005
C. Microsoft Visual Studio 2008
D. Microsoft Visual Studio 2012
Answer: D

Motorola Solutions   MSC-331 examen   certification MSC-331   MSC-331

NO.3 Your customer has selected a MC9190-G with a SE4500-SR scan engine. They are now asking
you what the maximum distance they can expect to scan 13 Mil standard UPC-A barcodes. Which of
the following would be your response?
Please reference the Technical Specifications exhibit at the bottom.
A. 6.8 in (17.27 cm)
B. 12.0 in (30.48 cm)
C. 15.5 in (39.37cm)
D. 27.0 in (68.58 cm)
Answer: C

Motorola Solutions examen   MSC-331   certification MSC-331   MSC-331   MSC-331

NO.4 A client needs a mobile device solution that requires the following:
GSM and/or CDMA WWAN
Small Form Factor
Consumer Style Device
Occasional Barcode and Photo Capture
What would be the best mobile device selection from the mobile device portfolio?
A. ET1
B. ES400
C. MC75A
D. MC3190
E. MC9090G
Answer: B

Motorola Solutions   MSC-331 examen   MSC-331   MSC-331 examen

NO.5 Which of the following memory forms is used in most memory cards and solid-state drives?
A. NOR Flash
B. NAND Flash
C. Static Random Access Memory (SRAM)
D. Dynamic random-access memory (DRAM)
Answer: B

certification Motorola Solutions   MSC-331   MSC-331 examen

NO.6 Your are having issues establishing radio communication on a mobile computer and you think
that the client radio output is the problem. In which of the following areas can you adjust the
mobile computers radio transmit power?
A. Fusion Options
B. System Options
C. Regulatory Options
D. Profile Management Options
E. You cannot change the mobile computers radio transmit power
Answer: E

Motorola Solutions   MSC-331   MSC-331 examen   MSC-331

NO.7 Motorola Enterprise Mobility Configuration Tools (EMCTs) are comprehensive tools designed
to assist in staging, provisioning, and troubleshooting, as well as improving the user experience with
Motorola Mobile Devices. Which of the following are Motorola EMCTs Tools (select THREE)?
A. StartupCtl
B. PowerTest
C. RemCapture
D. CtlPanelWM
E. Spread Spectrum Analyzer
Answer: A,C,D

Motorola Solutions   MSC-331   certification MSC-331   MSC-331   MSC-331

NO.8 Which of the following 802.11 wireless supplicants are available and supported on Motorola
Solutions Mobile Computers (select TWO)?
A. Aegis
B. Fusion
C. Odyssey
D. Windows Zero Configuration
Answer: B,D

Motorola Solutions   MSC-331 examen   MSC-331 examen   MSC-331 examen

La Q&A de Pass4Test vise au test Certificat Motorola Solutions MSC-331. L'outil de formation Motorola Solutions MSC-331 offert par Pass4Test comprend les exercices de pratique et le test simulation. Vous pouvez trouver les autres sites de provider la Q&A, en fait vous allez découvrir que c'est l'outil de formation de Pass4Test qui offre les documentaions plus compètes et avec une meilleure qualité.

Motorola Solutions meilleur examen MSC-321, questions et réponses

Le test Certification Motorola Solutions MSC-321 est une chance précieuse à augmenter vos connaissances de technologie informatique dans l'industrie IT. Il attire beaucoup de professionls à participer ce test. Pass4Test peut vous offrir les outils de formation particuliers à propos de test Motorola Solutions MSC-321. Vous réaliserez plus tôt votre rêve avec la Q&A écrite par l'équipe professionnelle de Pass4Test. Pass4Test se contribue à vous donner un coup de main pour réussir le test Motorola Solutions MSC-321.

Aujourd'hui, il y a pleine de professionnels IT dans cette société. Ces professionnels sont bien populaires mais ils ont à être en face d'une grande compétition. Donc beaucoup de professionnels IT se prouver par les tests de Certification très difficile à réussir. Pass4Test est voilà pour offrir un raccourci au succès de test Certification.

Code d'Examen: MSC-321
Nom d'Examen: Motorola Solutions (Designing and Deploying Advanced Data Capture (ADC) Solution)
Questions et réponses: 114 Q&As

Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification Motorola Solutions MSC-321. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.

Un bon choix de l'outil à se former est le point essentiel à passer le test Motorola Solutions MSC-321, et les documentations à propos de rechercher le test Motorola Solutions MSC-321 est toujours une part plus importante pendant la préparation de test Certification. Les Q&As offertes par les experts de Pass4Test sont presque même que les tests réels. Pass4Test est un site web particulièrement en apportant les facilités aux gens qui veulent passer le test Certification.

Pass4Test est un site web qui vous donne plus de chances à passer le test de Certification Motorola Solutions MSC-321. Le résultat de recherche sortis par les experts de Pass4Test peut assurer que ce sera vous ensuite qui réussirez le test Motorola Solutions MSC-321. Choisissez Pass4Test, choisissez le succès. L'outil de se former de Pass4Test est bien efficace. Parmi les gens qui ont déjà passé le test, la majorité a préparé le test avec la Q&A de Pass4Test.

MSC-321 Démo gratuit à télécharger: http://www.pass4test.fr/MSC-321.html

NO.1 You have a Request for Proposal for a customer that will be receiving cars in a car rental
location, customer wants to read the car's VIN barcode, take an image of the license plate and
record customer specific information. The customer is price sensitive and they don't want to buy a
mobile computer. Which of the following items would you recommend for this customer?
A. LS300S
B. LS920Si
C. MK500 touch screen
D. MT2090 with 2D imager
Answer: D

Motorola Solutions   MSC-321   MSC-321

NO.2 You have a government customer that just opened a bid in Latin America for a company with
1,000 convenience stores located in small cities across Mexico and EI Salvador. The customer
requires the support of both 1 and 2D scanning with the same device and a minimum of 2 per store.
The customer is price sensitive. Which of the following scanner combinations would you
recommend?
A. LS1203 - Corded
B. LS2208 - Corded
C. LS4208 - Corded
D. LS4278 - Cordless
E. DS4208 - Corded
F. DS6707-SR - Corded
G. DS6878-SR-Cordless
H. DS9808-SR - Corded
Answer: E

Motorola Solutions examen   MSC-321 examen   MSC-321   MSC-321

NO.3 Which of the following bar code types is readable by a 1D scanner?
A. Maxicode
B. Data matrix
C. QR Code
D. Interleaved 2 of 5
Answer: D

Motorola Solutions   certification MSC-321   MSC-321   certification MSC-321   MSC-321

NO.4 The ability of a scanner to decode a barcode even when there is relative motion between the
barcode and the scanner is called:
A. Ambient light immunity
B. Aiming pattern
C. Omni-directionality
D. Motion Tolerance
Answer: D

Motorola Solutions   MSC-321 examen   MSC-321 examen

NO.5 Which of the following bar codes is NOT considered two dimensional bar code?
A. Code 39
B. PDF 417
C. QR Code
D. Data matrix
Answer: A

certification Motorola Solutions   MSC-321   MSC-321   MSC-321   MSC-321 examen

NO.6 Which of the following devices uses many rows of pixels to help it decode poorly printed or
damaged barcodes?
A. Linear Imager
B. Laser Scanner
C. Area Imager
D. Contact Scanner
Answer: C

certification Motorola Solutions   MSC-321   certification MSC-321   certification MSC-321

NO.7 Which of the following scanning technologies has the highest tolerance for reading bar codes
from items in motion?
A. Linear Imager
B. Laser Scanner
C. Area Imager
D. Contact Scanner
Answer: B

certification Motorola Solutions   MSC-321   MSC-321   MSC-321 examen

NO.8 Which of the following communication interfaces CANNOT be used by an application to
senddata/scanner commands bi-directionally?
A. USB SNAPI
B. RS-232SSI
C. USB
D. OPOS
E. Keyboard Wedge
Answer: E

certification Motorola Solutions   certification MSC-321   MSC-321

NO.9 Which of the following scanning technologies can read laser etched barcodes?
A. Long Range Scanners
B. Laser Scanners
C. DPM Scanners
D. CCD Scanners
Answer: C

certification Motorola Solutions   MSC-321 examen   certification MSC-321   certification MSC-321   certification MSC-321

NO.10 Data Matrix bar codes are typically found on which of the following items?
A. Books
B. Printed Circuit Boards (PCB)
C. Package Sorting
D. Fruits and Vegetables
Answer: B

Motorola Solutions   certification MSC-321   MSC-321 examen   MSC-321 examen

Si vous voulez ne se soucier plus à passer le test Motorola Solutions MSC-321, donc vous devez prendre la Q&A de Pass4Test comme le guide d'étude pendant la préparation de test Motorola Solutions MSC-321. C'est une bonne affaire parce que un petit invertissement peut vous rendre beaucoup. Utiliser la Q&A Motorola Solutions MSC-321 offerte par Pass4Test peut vous assurer à réussir le test 100%. Pass4Test a toujours une bonne réputation dans l'Industrie IT.

Le matériel de formation de l'examen de meilleur Motorola Solutions MSC-122

Avec la version plus nouvelle de Q&A Motorola Solutions MSC-122, réussir le test Motorola Solutions MSC-122 n'est plus un rêve très loin pour vous. Pass4Test peut vous aider à réaliser ce rêve. Le test simualtion de Pass4Test est bien proche du test réel. Vous aurez l'assurance à réussir le test avec le guide de Pass4Test. Voilà, le succès est juste près de vous.

Dans l'Industrie IT, le certificat IT peut vous permet d'une space plus grande de se promouvoir. Généralement, la promotion de l'entreprise repose sur ce que vous avec la certification. Le Certificat Motorola Solutions MSC-122 est bien autorisé. Avec le certificat Motorola Solutions MSC-122, vous aurez une meilleure carrière dans le future. Vous pouvez télécharger tout d'abord la partie gratuite de Q&A Motorola Solutions MSC-122.

Le Pass4Test est un site qui peut offrir les facilités aux candidats et aider les candidats à réaliser leurs rêve. Si vous êtes souci de votre test Certification, Pass4Test peut vous rendre heureux. La haute précision et la grande couverture de la Q&A de Pass4Test vous aidera pendant la préparation de test. Vous n'aurez aucune raison de regretter parce que Pass4Test réalisera votre rêve.

Code d'Examen: MSC-122
Nom d'Examen: Motorola Solutions (Deploy WLAN Solutions)
Questions et réponses: 113 Q&As

En quelques années, le test de certification de Motorola Solutions MSC-122 faisait un grand impact sur la vie quotidienne pour pas mal de gens. Voilà le problème, comme on peut réussir facilement le test de Motorola Solutions MSC-122? Notre Pass4Test peut vous aider à tout moment à résourdre ce problème rapidement. Pass4Test peut vous offrir une bonne formation particulière à propos du test de certification MSC-122. Notre outil de test formation est apporté par les IT experts. Chez Pass4Test, vous pouvez toujours trouver une formations à propos du test Certification MSC-122, plus nouvelle et plus proche d'un test réel. Tu choisis le Pass4Test aujourd'hui, tu choisis le succès de test Certification demain.

MSC-122 Démo gratuit à télécharger: http://www.pass4test.fr/MSC-122.html

NO.1 You have configured a Motorola RFS controller using WiNG 5 and have attempted to adopt a group of
APs using L2 adoption but the adoption is not successful. You have confirmed the following:
-All of the APs have an Ethernet connection to the same LAN segment as the controller -Spanning Tree
Protocol (STP) has been disabled on the APs next hop switch port -Intermediate firewalls are not blocking
EtherType 0x8783
Given this scenario, which of the following is the most likely cause of the unsuccessful AP adoption?
A. DHCP option 192 has not been defined on the DHCP server
B. A local VLAN has been configured on both the controller and the APs
C. The APs GE ports have been configured for an S02.1q-tagged native VLAN
D. The APs GE ports have been configured for an 802.1q-untagged native VLAN
Answer: C

certification Motorola Solutions   MSC-122   MSC-122

NO.2 If a Motorola access point induces a 50 mW RF signal onto a 3 dBi antenna, what will be the resulting
EIRP of the transmitted signal?
A. 0 dBm
B. 3 dBm
C. 20 dBm
D. 50 mW
E. 50 dBm
Answer: C

Motorola Solutions examen   MSC-122   certification MSC-122   MSC-122

NO.3 Which of the following statements regarding the configuration of Motorola RFS controllers is TRUE?
A. ADSP can be used to push CLI profiles to APs and controllers.
B. LANPlanner can be used to push CLI profiles to APs and controllers.
C. RFMS can be used to perform predictive site surveys using an RFS controller
D. WiNG 5 can be used to perform manual site surveys using an RFs controller
E. CLI can be used to perform both manual and predictive site surveys using an RFS controller.
Answer: A

certification Motorola Solutions   MSC-122   MSC-122 examen   MSC-122

NO.4 Which of the following APs does not support adaptive mode?
A. AP7131
B. AP6532
C. AP650
D. AP6521
Answer: A

Motorola Solutions   MSC-122   certification MSC-122   certification MSC-122   certification MSC-122   MSC-122

NO.5 Which of the following statements is NOT considered to be a best practice with respect to the wired
backbone serving the WLAN.?
A. When performing manual configuration of a point-to-point Ethernet link, ensure that both the speed and
the duplex mode settings on the two ports match.
B. When creating a link between Ethernet 10/100BASE-T or 10/100/1000BASE-T ports, enable (or accept
the default of) auto-negotiation on both ports.
C. When creating a link between Gigabit Ethernet fiber ports, enable (or accept the default of)
auto-negotiation.
D. When creating a link between Gigabit Ethernet fiber ports, disable auto-negotiation on both ports.
Answer: D

Motorola Solutions examen   MSC-122   MSC-122   MSC-122

NO.6 Your customer has requested that during the upcoming 802.llg to 802.11n upgrade deployment you
enable 40 MHz channels on 1, 6, and 11 of the 2.4 GHz ISM band. You respond by saying that there is not
enough spectrum to allow 40 MHz channels centered on 1, 6, and 11. How wide are standard 802.11g
(OFDM) channels?
A. 20 MHz
B. 83.5 MHz
C. 5 MHz
D. 11 MHz
E. 22 MHz
Answer: A

Motorola Solutions examen   MSC-122   MSC-122   MSC-122

NO.7 Your customer has requested that you configure unique VLANs for voice, normal user data with
802.1X security, guest access, and management traffic. Which of the following VLAN modes can support
this request?
A. Native Mode
B. Access Mode
C. Trunk Mode
D. Aggregation Mode
E. Encapsulation Mode
Answer: C

Motorola Solutions   MSC-122   MSC-122

NO.8 You are deploying a new WLAN within the WiNG 5 architecture. Which of the following is the only
UNSUPPORTED Motorola access point/port?
A. AP-300
B. AP-650
C. AP-5131
D. AP-7131
Answer: C

Motorola Solutions examen   MSC-122   MSC-122   MSC-122   MSC-122

NO.9 You have just conducted a throughput test using iPerf on a WLAN that shows a PHY signaling rate of 54
Mbps, however the average throughput rate shown in iPerf is only 23.5 Mbps. What is the most likely
explanation for this condition?
A. This throughput speed is considered nominal.
B. This throughput rate could indicate a mismatch between Wi-Fi confidentiality algorithms.
C. This throughput rate indicates excessive user activity.
D. This throughput rate indicates excessive out-of-band interference such as nearby cell phone towers.
Answer: A

Motorola Solutions   MSC-122   MSC-122   MSC-122

NO.10 You have an access point that requires PoE connected to a switch with a 150 meter 10 BASE-T CAT 5
cable. During testing numerous problems with both data transmission and intermittent power occurs.
Which of the following is most likely the cause?
A. The cable should be CAT 6
B. There is a duplex mismatch
C. The cable should be 100 BASE-T
D. The cable is too long
Answer: D

certification Motorola Solutions   certification MSC-122   MSC-122 examen   certification MSC-122

NO.11 You are designing a WLAN that will support multiple BSS IDs. One of the characteristics you need to
take into consideration is that each BSS transmits a beacon every 100 ms. How many BSSs can be
enabled on the following Motorola access points under WiNG 5: AP7131, AP650, AP6532?
A. 2, one per radio
B. 1 per AP, it is shared between the radios to provide seamless roaming
C. 8, four per radio
D. 16, eight per radio
Answer: D

Motorola Solutions   certification MSC-122   MSC-122   MSC-122 examen   certification MSC-122

NO.12 You are performing a physical site survey of a new WiNG 5 WLAN deployment. Which of the following is
CORRECT?
A. The Signal to Noise Ratio (SNR) is a critical measurement that needs to be addressed.
B. It is acceptable that you use any RF infrastructure device (Access Point) to perform the site survey test.
C. Using default settings of a site survey application will provide an adequate site survey result.
D. Customer throughput requirements are the only criteria for which need to be surveyed.
Answer: B

Motorola Solutions examen   MSC-122   MSC-122   MSC-122

NO.13 You are deploying a new system and are creating the RF Domain(s). Which of the following options
would you use to group the APs into the same domain?
A. By VLAN, where all APs are on the same subnet.
B. By site, which can be a location where the group of installed APs can hear each other's beacons.
C. By name, so they can be easily sorted in the tree view of the controller.
D. By deployment phase, so configurations can be accidentally pushed to newly installed APs.
Answer: A

Motorola Solutions   certification MSC-122   certification MSC-122   certification MSC-122   certification MSC-122

NO.14 During a recent throughput analysis test of your 802.11g network, you discovered that performance is
poor in comparison to previous baselines. You discover that this is the result of 802.11b stations becoming
associated with your access point. What option could you implement to eliminate 802.lib clients from
attaching to your network?
A. Implement protection mechanisms
B. Make 24 mbps a required data rate
C. Implement RTS/CTS at the access point
D. Change the channel used for the network
Answer: B

Motorola Solutions   MSC-122 examen   certification MSC-122   certification MSC-122   MSC-122 examen   MSC-122 examen

NO.15 Which of the following is the primary method of collision avoidance in an 802.11 CSMA/CA WLAN?
A. Backoff Timer
B. Carrier Sense
C. Contention Window
D. Enhanced Distributed Channel Access (EDCA)
E. Distributed Coordination Function Interframe Spaces (DIFS)
Answer: B

Motorola Solutions examen   MSC-122 examen   MSC-122   MSC-122 examen   MSC-122

Dépenser assez de temps et d'argent pour réussir le test Motorola Solutions MSC-122 ne peut pas vous assurer à passer le test Motorola Solutions MSC-122 sans aucune doute. Choisissez le Pass4Test, moins d'argent coûtés mais plus sûr pour le succès de test. Dans cette société, le temps est tellement précieux que vous devez choisir un bon site à vous aider. Choisir le Pass4Test symbole le succès dans le future.

Le plus récent matériel de formation Motorola Solutions MSC-331

La partie plus nouvelle de test Certification Motorola Solutions MSC-331 est disponible à télécharger gratuitement dans le site de Pass4Test. Les exercices de Pass4Test sont bien proches de test réel Motorola Solutions MSC-331. En comparaison les Q&As dans les autres sites, vous trouverez que les nôtres sont beaucoup plus complets. Les Q&As de Pass4Test sont tout recherchés par les experts de Pass4Test, y compris le test simulation.

Vous aurez le service de la mise à jour gratuite pendant un an une fois que vous achetez le produit de Pass4Test. Vous pouvez recevoir les notes immédiatement à propos de aucun changement dans le test ou la nouvelle Q&A sortie. Pass4Test permet tous les clients à réussir le test Motorola Solutions MSC-331 à la première fois.

Vous n'avez besoin que de faire les exercices à propos du test Motorola Solutions MSC-331 offertes par Pass4Test, vous pouvez réussir le test sans aucune doute. Et ensuite, vous aurez plus de chances de promouvoir avec le Certificat. Si vous ajoutez le produit au panier, nous vous offrirons le service 24h en ligne.

Pour l'instant, vous pouvez télécharger le démo gratuit de Q&A Motorola Solutions MSC-331 dans Pass4Test pour se former avant le test Motorola Solutions MSC-331.

En quelques années, le test de certification de Motorola Solutions MSC-331 faisait un grand impact sur la vie quotidienne pour pas mal de gens. Voilà le problème, comme on peut réussir facilement le test de Motorola Solutions MSC-331? Notre Pass4Test peut vous aider à tout moment à résourdre ce problème rapidement. Pass4Test peut vous offrir une bonne formation particulière à propos du test de certification MSC-331. Notre outil de test formation est apporté par les IT experts. Chez Pass4Test, vous pouvez toujours trouver une formations à propos du test Certification MSC-331, plus nouvelle et plus proche d'un test réel. Tu choisis le Pass4Test aujourd'hui, tu choisis le succès de test Certification demain.

Code d'Examen: MSC-331
Nom d'Examen: Motorola Solutions (Designing and Deploying Mobile Computing Solutions)
Questions et réponses: 69 Q&As

MSC-331 Démo gratuit à télécharger: http://www.pass4test.fr/MSC-331.html

NO.1 Motorola Enterprise Mobility Configuration Tools (EMCTs) are comprehensive tools designed
to assist in staging, provisioning, and troubleshooting, as well as improving the user experience with
Motorola Mobile Devices. Which of the following are Motorola EMCTs Tools (select THREE)?
A. StartupCtl
B. PowerTest
C. RemCapture
D. CtlPanelWM
E. Spread Spectrum Analyzer
Answer: A,C,D

certification Motorola Solutions   MSC-331   MSC-331   MSC-331 examen   MSC-331

NO.2 Your are having issues establishing radio communication on a mobile computer and you think
that the client radio output is the problem. In which of the following areas can you adjust the
mobile computers radio transmit power?
A. Fusion Options
B. System Options
C. Regulatory Options
D. Profile Management Options
E. You cannot change the mobile computers radio transmit power
Answer: E

Motorola Solutions examen   certification MSC-331   MSC-331

NO.3 A client needs a mobile device solution that requires the following:
GSM and/or CDMA WWAN
Small Form Factor
Consumer Style Device
Occasional Barcode and Photo Capture
What would be the best mobile device selection from the mobile device portfolio?
A. ET1
B. ES400
C. MC75A
D. MC3190
E. MC9090G
Answer: B

Motorola Solutions   MSC-331   MSC-331

NO.4 Which of the following 802.11 wireless supplicants are available and supported on Motorola
Solutions Mobile Computers (select TWO)?
A. Aegis
B. Fusion
C. Odyssey
D. Windows Zero Configuration
Answer: B,D

Motorola Solutions   MSC-331 examen   MSC-331 examen   certification MSC-331

NO.5 Your customer has selected a MC9190-G with a SE4500-SR scan engine. They are now asking
you what the maximum distance they can expect to scan 13 Mil standard UPC-A barcodes. Which of
the following would be your response?
Please reference the Technical Specifications exhibit at the bottom.
A. 6.8 in (17.27 cm)
B. 12.0 in (30.48 cm)
C. 15.5 in (39.37cm)
D. 27.0 in (68.58 cm)
Answer: C

Motorola Solutions examen   MSC-331 examen   MSC-331

NO.6 Which of the following memory forms is used in most memory cards and solid-state drives?
A. NOR Flash
B. NAND Flash
C. Static Random Access Memory (SRAM)
D. Dynamic random-access memory (DRAM)
Answer: B

Motorola Solutions   certification MSC-331   MSC-331

NO.7 The design phase of the pilot is an area that is often neglected. Which of the following is NOT
true regarding the design phase?
A. The best time to influence a pilot's trustworthy design is at pilot completion.
B. The design phase typically relies on information gathered from the planning phase.
C. Good pilot design should ensure or facilitate a framework for periodic project evaluation.
D. During the design phase you establish best practices to follow for this phase by way of functional
and design specifications, and you perform risk analysis to identify threats and vulnerabilities in
your pilot.
Answer: A

Motorola Solutions   MSC-331   MSC-331 examen   MSC-331 examen   MSC-331

NO.8 The Enterprise Mobility Developers Kit (EMDK) for .NET allows Microsoft: .NET Compact
Framework developers to programmatically access the enterprise mobility features on the devices.
This developer kit is designed for use with all of the following versions of Microsoft Visual Studio
EXCEPT:
A. Microsoft Visual Studio 2003
B. Microsoft Visual Studio 2005
C. Microsoft Visual Studio 2008
D. Microsoft Visual Studio 2012
Answer: D

certification Motorola Solutions   MSC-331   MSC-331 examen   certification MSC-331   MSC-331

Le temps est tellement précieux dans cette société que une bonn façon de se former avant le test Motorola Solutions MSC-331 est très important. Pass4Test fait tous efforts à assurer tous les candidats à réussir le test. Aussi, un an de mise à jour est gratuite pour vous. Si vous ne passez pas le test, votre argent sera tout rendu.

Le matériel de formation de l'examen de meilleur Motorola Solutions MSC-241

Pour réussir le test Motorola Solutions MSC-241 demande beaucoup de connaissances professionnelles IT. Il n'y a que les gens qui possèdent bien les connaissances complètes à participer le test Motorola Solutions MSC-241. Maintenant, on a les autres façons pour se former. Bien que vous n'ayez pas une connaissance complète maintenant, vous pouvez quand même réussir le test Motorola Solutions MSC-241 avec l'aide de Pass4Test. En comparaison des autres façons, cette là dépense moins de temps et de l'effort. Tous les chemins mènent à Rome.

Dans n'importe quelle industrie, tout le monde espère une meilleure occasion de se promouvoir, surtout dans l'industrie de IT. Les professionnelles dans l'industrie IT ont envie d'une plus grande space de se développer. Le Certificat Motorola Solutions MSC-241 peut réaliser ce rêve. Et Pass4Test peut vous aider à réussir le test Motorola Solutions MSC-241.

Aujourd'hui, c'est une société pleine de gens talentueux, la meilleure façon de suivre et assurer la place dans votre carrière est de s'améliorer sans arrêt. Si vous n'augmentez pas dans votre carrière, vous êtes juste sous-développé parce que les autres sont meilleurs que vous. Pour éviter ce cas, vous devez vous former successivement.

Le Certificat Motorola Solutions MSC-241 est un passport rêvé par beaucoup de professionnels IT. Le test Motorola Solutions MSC-241 est une bonne examination pour les connaissances et techniques professionnelles. Il demande beaucoup de travaux et efforts pour passer le test Motorola Solutions MSC-241. Pass4Test est le site qui peut vous aider à économiser le temps et l'effort pour réussir le test Motorola Solutions MSC-241 avec plus de possibilités. Si vous êtes intéressé par Pass4Test, vous pouvez télécharger la partie gratuite de Q&A Motorola Solutions MSC-241 pour prendre un essai.

Code d'Examen: MSC-241
Nom d'Examen: Motorola Solutions (Design and Deploy for MOTOTRBO Solutions EMEA)
Questions et réponses: 108 Q&As

Aujoud'hui, dans cette indutrie IT de plus en plus concurrentiel, le Certificat de Motorola Solutions MSC-241 peut bien prouver que vous avez une bonne concurrence et une space professionnelle plus grande à atteindre. Dans le site Pass4Test, vous pouvez trouver un outil de se former très pratique. Nos IT experts vous offrent les Q&As précises et détaillées pour faciliter votre cours de préparer le test Motorola Solutions MSC-241 qui vous amenera le succès du test Motorola Solutions MSC-241, au lieu de traivailler avec peine et sans résultat.

MSC-241 Démo gratuit à télécharger: http://www.pass4test.fr/MSC-241.html

NO.1 What will Enhanced Channel Access improve?
A. The amount of GPS updates that can be sent on a data revert channel
B. The amount of time from when PTT is pressed until voice is sent
C. Call success rate
D. Call setup time
Answer: C

certification Motorola Solutions   MSC-241 examen   MSC-241   MSC-241 examen

NO.2 Which of the following are TRUE statements about operating a MOTOTRBO repeater in an IP
Site
Connect configuration?
A. One of its logical channels can work in IP Site Connect mode (over wide area) and the other
logical channel can work in digital repeater mode (single site over local area).
B. Both logical channels can work in digital repeater mode (single site over local area).
C. Both logical channels can work in IP Site Connect mode (over wide area).
D. Only A and B are true (C is false).
E. Only A and C are true (B is false).
F. A, B, and C are true.
Answer: F

Motorola Solutions   MSC-241   MSC-241   MSC-241   MSC-241 examen

NO.3 Which of the following antennas is BEST suited for providing coverage inside a tall building?
A. 4 element Yagi
B. Radiating coaxial cable
C. End-fed half-wave antenna
D. High gain collinear antenna
Answer: B

Motorola Solutions   MSC-241 examen   MSC-241   MSC-241 examen

NO.4 A Capacity Plus system consists of three (3) repeaters with repeater one (1) the master and
repeaters two (2) and three (3) as peers. The dealer needs to make a simple change in repeater
two (2) and utilize IP repeater programming (IRP) to access the repeater remotely. A couple of
days later the customer calls and complains about users getting system busy tones (engaged
tones).
The dealer attempts to connect an RDAC remotely to the system with no success. He has verified
he can communicate to the router at the site.
Which of the following statements BEST describes the issue?
A. The master has gone down and taken the rest of the Capacity Plus network with it.
B. The master has gone down and the system is operating on just two (2) repeaters.
C. There is RF interference on the channel and the master repeater is unable to communicate to
the peers.
D. The peers are using DHCP and are not able to connect to the master and refresh their peer list.
The system is operating on just the master.
Answer: B

Motorola Solutions   certification MSC-241   MSC-241   MSC-241   certification MSC-241

NO.5 Which of the following are TRUE statements about operating a MOTOTRBO repeater in a
Capacity Plus configuration?
A. One of its logical channels can work in trunked mode and the other logical channel can work in
data revert mode.
B. Both logical channels can work in trunked mode.
C. Both logical channels can work in data revert mode.
D. Only A & B are true (C is false)
E. Only B & C are true (A is false)
F. A, B, & C are true
Answer: F

Motorola Solutions examen   MSC-241   MSC-241   MSC-241   MSC-241   certification MSC-241

NO.6 A Capacity Plus system consists of three (3) repeaters with repeater one (1) the master and
repeaters two (2) and three (3) as peers. On the 24th of May, there is a lighting strike at the site
and the building lost power, causing the three repeaters to revert to DC power. The design of the
site called for just the repeaters to be battery backed. However the next morning the customer
calls and reports that a number of talkgroups are getting busy tones (engaged), yet other groups
are seeing no busy tones (engaged) on the system. Which of the following statements BEST
describe the issue?
A. The master has gone down and taken the rest of the Capacity Plus network with it.
B. The peers use DHCP and were not able to connect to the master and refresh their peer list and
went off the Capacity Plus network as their leases expired.
C. The switch was not on battery backup and there are no LAN connections on the Capacity Plus
system, each of the repeaters are now operating as three (3) independent Capacity Plus systems.
D. The peers use DHCP and were not able to connect to the master and refresh their peer list.
The dealer should have used static IP addresses throughout.
Answer: C

certification Motorola Solutions   MSC-241   MSC-241 examen   MSC-241   certification MSC-241

NO.7 What changes are required to the Master Repeater in an IP Site Connect system when a new
peer
is added to the system?
A. Both the IP address and port number of the new repeater must be configured into the Master
Repeater.
B. The address of the new peer must be configured into the Master Repeater.
C. The port of the new peer must be configured into the Master Repeater.
D. No changes are required to the Master Repeater.
Answer: D

certification Motorola Solutions   MSC-241   MSC-241

NO.8 You are looking to optimize battery life of radios that are close to the base station. Which is
the
most likely parameter for optimizing the battery life of a radio for a Capacity Plus system?
A. Beacon interval
B. Beacon duration
C. High power mode in Radio
D. Low power mode in Radio
Answer: D

Motorola Solutions   certification MSC-241   MSC-241 examen   certification MSC-241

NO.9 A MOTOTRBO repeater is connected to a Zetron Model 35 Telephone Interconnect. If a
telephone
user dials the Telephone Interconnect number, they get a busy signal (engaged tone). If a radio
user dials any telephone number, they don’t hear the ringing tone, only silence. Upon visiting the
site, you find that when a radio user dials, the relay click can be heard from the Zetron Model 35.
Unplugging the RJ11 and dialing the Telephone Interconnect, still results in a busy signal
(engaged tone). With this information, what do you think could be wrong?
A. The Zetron Model 35 may be faulty.
B. The Zetron Model 35 has probably not been configured for the phone line Ringer Equivalence
Number (REN).
C. The RJ11 cable may have a short circuit or there is a short circuit somewhere between the site
and the exchange.
D. The repeater interface cable to the Zetron Model 35 is faulty.
Answer: C

Motorola Solutions examen   MSC-241   MSC-241   MSC-241   certification MSC-241

NO.10 On which type of channel in an IP Site Connect system are Transmit Interrupt features
supported
in repeater firmware releases R01.08.00 and higher?
A. Wide Area Slots only
B. Local Area Slots only
C. Both Wide and Local Area slots
D. Noneoftheabove
Answer: D

Motorola Solutions   MSC-241 examen   certification MSC-241   certification MSC-241

Il faut une bonne préparation et aussi une série de connaissances professionnelles complètes pour réussir le test Motorola Solutions MSC-241. La ressourece providée par Pass4Test peut juste s'accorder votre demande.

Motorola Solutions meilleur examen MSC-235, questions et réponses

Pass4Test, où vous pouvez trouver les conseils et les documentations de test Certification Motorola Solutions MSC-235, est un siteweb remarquable offrant les données à préparer le test IT. Les documentations partiels et les mis en nouveau sont offerts gratuitement dans le site de Pass4Test. D'ailleurs, nos experts profitent de leurs expériences et leurs efforts à lancer sans arrêts les Q&A plus proches au test réel. Vous allez passer votre examen plus facile.

Le test Motorola Solutions MSC-235 est une examination de techniques professionnelles dans l'Industrie IT. Pass4Test est un site qui peut vous aider à réussir le test Motorola Solutions MSC-235 rapidement. Si vous utiliser l'outil de formation avant le test, vous apprendrez tous essences de test Certification Motorola Solutions MSC-235.

Si vous hésitez encore à nous choisir, vous pouvez tout d'abord télécharger le démo gratuit dans le site Pass4Test pour connaître mieux la fiabilité de Pass4Test. Nous avons la confiance à vous promettre que vous allez passer le test Motorola Solutions MSC-235 à la première fois.

Pass4Test est un site de vous ramener au succès. Pass4Test peut vous aider à promouvoir les connaissances essentielles pour le test Motorola Solutions MSC-235 et passer le test à la première fois.

Le test Motorola Solutions MSC-235 peut bien examnier les connaissances et techniques professionnelles. Pass4Test est votre raccourci amené au succès de test Motorola Solutions MSC-235. Chez Pass4Test, vous n'avez pas besoin de dépenser trop de temps et d'argent juste pour préparer le test Motorola Solutions MSC-235. Travaillez avec l'outil formation de Pass4Test visé au test, il ne vous demande que 20 heures à préparer.

Code d'Examen: MSC-235
Nom d'Examen: Motorola Solutions (Design and Deploy for MOTOTRBO Connect Plus Solutions BETA)
Questions et réponses: 130 Q&As

MSC-235 Démo gratuit à télécharger: http://www.pass4test.fr/MSC-235.html

NO.1 A Request for Proposal (RFP) for a single-site, operations-critical customer requires you to
respond to the following requirement: “...if the RF site equipment includes network switches,
describe the system behavior in the event of a site LAN switch failure.” Which of the following is
the BEST response to this requirement?
A. Redundant site networking equipment may be specified and configured so as to negate the
impact of a single site LAN switch failure. If redundant networking equipment is not installed,the
failure of a site LAN will not affect calls in-progress, but will make it impossible for subscribers to
register at the site.
B. If the single site LAN switch fails, the site master repeater will begin broadcasting failsoft
messages. All subscribers will revert to failsoft operation. The users may select any site repeater
on which to communicate conventionally.
C. Redundant site networking equipment may be specified and configured so as to negate the
impact of a single site LAN switch failure. If redundant networking equipment is not installed, the
failure of a site LAN switch will cause all calls to drop and the subscribers will attempt to roam to
an operational site.
D. In the case of a single-site system, Connect Plus does not utilize site LAN switches.
Answer: C

Motorola Solutions   MSC-235   MSC-235   certification MSC-235

NO.2 You are designing a 3 site Connect Plus system with 12 repeaters per site, no site controller
redundancy, and 3 control channel-capable repeaters at each site. The average number of
subscribers active at a site may approach 300 at any given time of the day. If this customer
experiences a site controller failure, what symptoms and subscriber behavior would you expect
immediately after the failure occurs?
A. All calls in progress at the site will drop. Subscribers will automatically fall back to digital
conventional, allowing users to utilize any of the site’s repeaters.
B. All calls in progress at the site will drop. All subscribers will attempt to roam to one of the other
sites.
C. Calls in progress will remain until one of the other control-channel capable repeaters assumes
the site controller’s role and then they will drop and register on the new controller.
D. Calls in progress will stay up until they complete normally. Subscribers on the control channel
will attempt to roam to one of the other sites.
Answer: B

Motorola Solutions   MSC-235   MSC-235 examen   MSC-235

NO.3 If there is a failure or reboot of a site controller, which of the following must you consider
regarding
Over The Air (OTA) file transfers (select TWO)?
A. Any transfers in progress at the time of the failure may have to be repeated.
B. The controller will have to be re-entitled for OTA operation after it is back online.
C. If the site controller recovers on a different Control Channel, transfers may have to be
reconfigured.
D. Any pending transfers on that controller will be lost and must be re-queued.
Answer: A,D

Motorola Solutions examen   MSC-235 examen   certification MSC-235   MSC-235

NO.4 Your customer operates a 4-site Connect Plus network. Two sites are adjacent to each other,
with
overlapping coverage. The other two sites respectively service two manufacturing plants that are
approximately 900 kilometers (559 miles) apart. There are approximately 30 talkgroups in the
network and 300 subscribers. When creating the Option Board codeplug for this customer’s
portable radios, which of the following is the best strategy to ensure smooth, logical operation?
A. Create a separate zone for each of the 4 sites to contain all the necessary contact and RSSI
settings.
B. Create a single Connect Plus zone that will address all of their necessary RSSI settings and
contact lists.
C. Create 2 Connect Plus zones to contain the different contacts and RSSI settings necessary
with this type of topology.
D. Create 3 separate Connect Plus zones to contain the different contacts and RSSI settings
necessary with this type of topology.
Answer: D

Motorola Solutions   MSC-235   MSC-235

NO.5 Your customer is a rail operator whose system covers approximately 125 kilometers (77 miles)
of
track. Trains travel rapidly, and the operator is using a location tracking application to update their
displayed location as frequently as possible. Location updates are critical, even if this means
putting voice calls into the busy queue. What can you do to ensure this behavior?
A. Make sure that RSSI settings are set to -ll3dBm or less for “RSSI Preferred” in the mobiles in
the trains. This will allow the proper sensitivity to make frequent location updates possible. Give
individual SU records a lower priority than any talkgroup priority.
B. Enhanced GPS must be enabled in the Repeaters and Subscribers. Give individual SU records
a higher priority than any talkgroup priority.
C. Call Sessions Configuration in the Network Manager should be set to 29 for the “Number of
Outbound Data Sessions Allowed” field and somewhat less for the Number of Voice/Inbound Data
sessions field. Give individual SU records a higher priority than any talkgroup priority.
D. Location updates should be optimized by enabling Advanced GPS with GPS Data Revert
channels.
Answer: C

Motorola Solutions examen   MSC-235   certification MSC-235   certification MSC-235   certification MSC-235

NO.6 You are using the Network Manager to connect to a multisite system. Where can you view the
current state of connections to other sites in this multisite system?
A. Event Log Viewer
B. RealTime Display
C. Site Status Window
D. MultiSite Configuration Window
Answer: C

Motorola Solutions   MSC-235 examen   MSC-235 examen

Dans ce monde d'informatique, l'industrie IT est suivi par de plus en plus de ges. Dans ce domaine demandant beaucoup de techniques, il faut des Certificat à se preuver les techniques professionnelle. Les Certificats IT sont improtant pour un interviewé pendant un entretien. C'est pas facile à passer le test Motorola Solutions MSC-235, donc c'est pourquoi beaucoup de professionnels qui choisissent ce Certificat pour se preuver.

Pass4Test offre de Motorola Solutions MSC-121 matériaux d'essai

Vous pouvez trouver un meilleur boulot dans l'industrie IT à travers d'obtenir le test Motorola Solutions MSC-121, la voie à la réussite de votre professionnel sera ouverte pour vous.

L'équipe de Pass4Test rehcerche la Q&A de test certification Motorola Solutions MSC-121 en visant le test Motorola Solutions MSC-121. Cet outil de formation peut vous aider à se préparer bien dans une courte terme. Vous vous renforcerez les connaissances de base et même prendrez tous essences de test Certification. Pass4Test vous assure à réussir le test Motorola Solutions MSC-121 sans aucune doute.

La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel Motorola Solutions MSC-121 peut vous assurer à réussir 100% le test Motorola Solutions MSC-121. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.

Pass4Test est un fournisseur de formation pour une courte terme, et Pass4Test peut vous assurer le succès de test Motorola Solutions MSC-121. Si malheureusement, vous échouez le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit avant de choisir Pass4Test. Au moment là, vous serez confiant sur Pass4Test.

Code d'Examen: MSC-121
Nom d'Examen: Motorola Solutions (Design WLan Solutions)
Questions et réponses: 112 Q&As

Pass4Test peut vous fournir un raccourci à passer le test Motorola Solutions MSC-121: moins de temps et efforts dépensés. Vous trouverez les bonnes documentations de se former dans le site Pass4Test qui peut vous aider efficacement à réussir le test Motorola Solutions MSC-121. Si vous voyez les documentations dans les autres sites, c'est pas difficile à trouver qu''elles sont venues de Pass4Test, parce que lesquelles dans Pass4Test sont le plus complété et la mise à jour plus vite.

MSC-121 Démo gratuit à télécharger: http://www.pass4test.fr/MSC-121.html

NO.1 XYZ Company is deploying a companywide Motorola Solutions wireless infrastructure. The following
list is a breakdown of XYZ Company facilities with the number of access points required for each location:
-Corporate HQ: 36 AP -Distribution Centers (3): 48 AP each -Warehouses (5): 34, 64, 28, 12, 20 AP
respectively -Satellite offices (25): 1-2 AP each. -Stores (1100): 3-4 AP each.
XYZ is looking for the most cost effective solution, while still being able to manage and configure the
system centrally. Which of the following would you recommend?
A. AP7131s at each location.
B. NX9000 at Corporate HQ and AP7131's at all locations.
C. NX9000 at Corporate HQ, RFS6000 and AP650 at locations with more than 24 AP's, AP6532 at
locations with less than 24 AP's.
D. 4 RFS7000 at Corporate HQ, RFS6000 and AP650 at locations with 24 or more AP's, AP6532 at
locations with less than 24 AP's.
E. NX9000 at Corporate HQ, RFS7000 and AP650 at locations with more than 24 AP's, AP7131 at
locations with up to 24 AP's.
Answer: C

Motorola Solutions   MSC-121   MSC-121 examen   certification MSC-121   MSC-121

NO.2 Which of the following must occur prior to a WLAN client device being assigned a TCP/IP address
through DHCP?
A. Successful 802.11 roaming
B. Successful 802.11 association
C. Successful 802.11 authentication
D. Successful 802.11 probe response
Answer: B

Motorola Solutions   MSC-121   MSC-121   certification MSC-121

NO.3 Which of the following statements is CORRECT concerning the IEEE 802.11 Open Authentication
procedure?
A. Uses four way frame exchange
B. Is optional before additional authentication
C. May occur after the association
D. Must occur before additional authentication
Answer: D

Motorola Solutions   MSC-121   certification MSC-121   MSC-121 examen   certification MSC-121   MSC-121 examen

NO.4 You have been assigned to design a new IEEE wireless LAN that will require six access points for both
coverage and capacity. Based on expected client device usage, it has been determined the
2.4 GHz ISM band will be the most appropriate for this deployment. Without taking any specific local
regulatory domain into consideration, how many channels are available for selection in the
2.4 GHz ISM band?
A. 3
B. 6
C. 11
D. 14
E. 23
Answer: D

Motorola Solutions   MSC-121   MSC-121 examen   certification MSC-121   MSC-121   MSC-121

NO.5 The IEEE 802.lln amendment to the standard addresses several PHY layer enhancements. One of
these enhancements is "Channel Bonding" allowing for 40 MHz wide channels. Without taking any
specific local regulatory domain into consideration, what is the maximum number of non-overlapping 40
MHz wide channels that can exist in the 2.4 GHz ISM band.?
A. 1
B. 2
C. 3
D. 6
E. 11
F. 20
Answer: A

certification Motorola Solutions   certification MSC-121   MSC-121

NO.6 You are a network design engineer and are assigned to provide an enterprise S02.1X/EAP solution to
secure your company's IEEE 802.11n WLAN. What networking protocol/service that provides centralized
Authentication, Authorization, and Accounting (AAA) management for computers to connect and use
wireless network resources can be implemented?
A. Secure Shell (SSH)
B. Public Key Infrastructure (PKI)
C. Virtual Private Networking (VPN)
D. Wi-Fi Protected Access (WPA) Passphrase
E. Remote Authentication DialinUser Service (RADIUS)
Answer: E

Motorola Solutions   certification MSC-121   certification MSC-121   certification MSC-121

NO.7 You are assigned the task of evaluating a wireless network. While using a layer 2 wireless LAN
analysis capture tool you notice support of a minimum rate of 6 Mbps. What IEEE 802.11 standard or
amendment to the standard operating in the U-NII band is in use on the company's WLAN (select TWO)?
A. 802.11
B. 802.11b
C. 802.11n
D. 802.11g
E. 802.11a
Answer: C,E

Motorola Solutions   MSC-121 examen   certification MSC-121   MSC-121 examen   MSC-121 examen

NO.8 Network Layer TCP/IP packets that are prepared to be sent across the 802.11 wireless medium are
commonly known as which of the following?
A. MAC service data unit
B. MAC protocol data unit
C. LLC sub-layer data unit
D. MAC service switch unit
E. PHY layer service data unit
Answer: A

Motorola Solutions examen   MSC-121   MSC-121 examen   MSC-121

NO.9 You are a computer network consultant at a small medical office and responsible for the design and
deployment of the IEEE 802.11b/g WLAN. Some of the users of the WLAN are complaining about the
performance of the network. You use a layer 2 WLAN analyzer to view the frames traversing the wireless
medium to see if you can determine the problem. After careful examination of the data recorded you
notice a significant amount of CTS-to-Self frames. What is a potential reason for the high number of these
frame types?
A. The access points are in OFDM only mode
B. The access points support Quality of Service
C. The access points are in HR/DSSS only mode
D. The access points are in ERP protection mode
Answer: D

Motorola Solutions examen   MSC-121 examen   MSC-121 examen   MSC-121   MSC-121 examen

NO.10 Which of the following situations would force a wireless client to renew its IP address?
A. Roaming between two BSSIDs assigned to the same VLAN
B. Roaming between controllers supporting the same VLANs
C. Roaming between two BSSIDs assigned to different VLANs
D. All of the above would force a client to renew its IP address
Answer: C

certification Motorola Solutions   MSC-121   certification MSC-121   certification MSC-121   certification MSC-121

NO.11 You are responsible for designing an 802.11n controller based wireless LAN for your organization
using independent access point technology, The Information Technology team has decided the wireless
LAN controllers should be installed on the core layer at the headquarters office location configured for
centralized forwarding. Which statements are true concerns with respect to this type of installation (select
TWO)?
A. S02.11n independent access points require the controller be installed at the network access layer only.
B. The WLAN controller at the core layer may be a bottleneck and limit scalability if not properly planned.
C. Network core layer deployments should always use 10 Gigabit (or faster) Ethernet components.
D. With centralized forwarding enabled all wireless traffic is tunneled to the WLAN controller that is
connected to the network core layer.
Answer: B,D

certification Motorola Solutions   certification MSC-121   MSC-121 examen   certification MSC-121   MSC-121

NO.12 Which of the following duplexing methods is used by the radios in Motorola's WLAN products?
A. Half-duplex
B. Full-duplex
C. Simplex
D. Half-duplex Tx / Full-duplex Rx
E. Full-duplex Tx / Ha If-duplex Rx
Answer: A

Motorola Solutions examen   MSC-121   MSC-121

NO.13 In radio frequency transmission the term Modulation Coding Scheme (MCS) is defined by which of the
following?
A. The combination of digital modulation method and a forward error correction mechanism.
B. A set of AES/CCMP cipher modes which assure integrity of an OFDM transmission.
C. The use of an encryption algorithm to securely code a modulated signal before transmission.
D. A multiplexing technique that uses orthogonal codes in place of X.509 digital certificates for message
validation.
Answer: A

certification Motorola Solutions   certification MSC-121   MSC-121   certification MSC-121

NO.14 Which of the following terms refers to the strength of an emitted RF signal measured at its strongest
point?
A. EIRP (Equivalent Isotropic Radiated Power)
B. 1FZ (First Fresnel Zone)
C. Azimuth
D. dBi
E. IR (Intentional Radiator)
Answer: A

Motorola Solutions examen   MSC-121   MSC-121   MSC-121

NO.15 You are designing a new 802.11 installation that will be built on an IEEE 802.3 10/100/1000
BaseT-backbone infrastructure. All IEEE 802.11n access points and VoIP phones will be IEEE
802.3 Power over Ethernet (PoE) powered devices. The 802.11n access points will utilize dual band 3X3
MIMO and require 802.3at PoE. Which is a true statement regarding a WLAN deployment of this nature?
A. This installation can only use endpoint Power Sourcing Equipment (PSE) devices.
B. Only IEEE 802.3af PoE devices can operate on a Gigabit network infrastructure.
C. VoIP phones and access points cannot be located on the same access layer PoE switches.
D. An accurate power sourcing equipment (PSE) power budget must be performed.
Answer: D

Motorola Solutions   MSC-121   MSC-121

Vous Motorola Solutions MSC-121 pouvez télécharger le démo Motorola Solutions MSC-121 gratuit dans le site Pass4Test pour essayer notre qualité. Une fois vous achetez le produit de Pass4Test, nous allons faire tous effort à vous aider à réussir le test à la première fois et vous laisser savoir qu'il ne faut pas beaucoup de travaux pour réussir ce que vous voulez.

Les meilleures Motorola Solutions MSC-431 examen pratique questions et réponses

Vous pouvez comparer un peu les Q&As dans les autres sites web que lesquelles de Pass4Test, c'est pas difficile à trouver que la Q&A Motorola Solutions MSC-431 est plus complète. Vous pouvez télécharger le démo gratuit à prendre un essai de la qualité de Pass4Test. La raison de la grande couverture des questions et la haute qualité des réponses vient de l'expérience riche et la connaissances professionnelles des experts de Pass4Test. La nouvelle Q&A de Motorola Solutions MSC-431 lancée par l'équipe de Pass4Test sont bien populaire par les candidats.

Pas besoin de beaucoup d'argent et de temps, vous pouvez passer le test Motorola Solutions MSC-431 juste avec la Q&A de Motorola Solutions MSC-431 offerte par Pass4Test qui vous offre le test simulation bien proche de test réel.

Choisissez le Pass4Test, choisissez le succès. Le produit offert par Pass4Test vous permet à réussir le test Motorola Solutions MSC-431. C'est necessaire de prendre un test simulation avant participer le test réel. C'est une façon bien effective. Choisir Pass4Test vous permet à réussir 100% le test.

Pass4Test est un site d'offrir la bonne Q&A Motorola Solutions MSC-431. Le produit offert par Pass4Test peut vous aider à réussir ce test très difficile. Si vous ajoutez le produit au panier, vous allez économiser le temps et l'effort. Le produiti Pass4Test est bien réputé dans l'Idustrie IT.

Code d'Examen: MSC-431
Nom d'Examen: Motorola Solutions (Lean Six Sigma Black Belt)
Questions et réponses: 100 Q&As

Les spécialistes d'expérience de Pass4Test ont fait une formation ciblée au test Motorola Solutions MSC-431. Cet outil de formation est convenable pour les candidats de test Motorola Solutions MSC-431. Pass4Test n'offre que les produits de qualité. Vous aurez une meilleure préparation à passer le test avec l'aide de Pass4Test.

MSC-431 Démo gratuit à télécharger: http://www.pass4test.fr/MSC-431.html

NO.1 After developing a Process map (listing steps and functions), the first step in developing an
FMEA is:
A. Brainstorming possible failure modes with team members
B. Assigning scores for SEVERITY , OCCURRENCE and DETECTION
C. Calculating RPN-Risk Priority Number
D. Prioritizing failure modes for action or resolution
Answer: A

Motorola Solutions examen   MSC-431   MSC-431

NO.2 What is the purpose of performing a Stakeholder Analysis?
A. Analyze the strength of commitment needed for project stakeholders vs. where they are currently
B. Analyze the risk for the project
C. Analyze the completeness of charter for the project
D. Analyze the methodology chosen for the project
Answer: A

certification Motorola Solutions   certification MSC-431   certification MSC-431   MSC-431 examen
7. Which of the following terms refers to a trial implementation of the proposed design or
process change on a reduced scale?
A. Production Run
B. Pilot
C. Design of Experiments
D. Comparative Method
Answer: B

Motorola Solutions examen   MSC-431   MSC-431   MSC-431   MSC-431 examen   MSC-431
8. What is the correct order of steps in an experiment (DOE)?
-Design the experiment & plan data collection -Run the experiment and collect data -State the
problem or objective -Analyze the results -Interpret the results"
A. 1,3,4,2,5
B. 3, 1, 2,4,5
C. 3,1,4,2,5
D. 3, 1, 2, 5,4
Answer: B

certification Motorola Solutions   certification MSC-431   MSC-431 examen

NO.3 In a statistical analysis, the beta risk () is:
A. The probability of rejecting the null hypothesis when it is true
B. Always equal to 0.10
C. Driven by the cost of sampling
D. The probability of failing to reject the null hypothesis when it is false
Answer: D

Motorola Solutions examen   MSC-431   MSC-431   MSC-431   MSC-431 examen

NO.4 For a multiple regression model, the R2 is the parameter that:
A. Represents the fraction of total variation explained by the model
B. Explains the strength of only one of the inputs in the model
C. Explains if the input factor causes the output response
D. Quantifies the slope of the line in the model
Answer: A

Motorola Solutions examen   certification MSC-431   MSC-431   MSC-431 examen   MSC-431

NO.5 What is the most powerful factor in achieving success in Six Sigma in an organization?
A. Strategic Integration
B. Business Process Framework
C. A consistent, disciplined team meeting schedule
D. Committed Leadership
Answer: D

Motorola Solutions   MSC-431   MSC-431   MSC-431   MSC-431

NO.6 Electrical devices are evaluated as conforming or not conforming to specifications. The
appropriate data type is:
A. Nominal discrete data
B. Continuous data
C. Ordinal data
D. Variable data
Answer: A

certification Motorola Solutions   MSC-431   MSC-431 examen   MSC-431

Pass4Test est un site de vous ramener au succès. Pass4Test peut vous aider à promouvoir les connaissances essentielles pour le test Motorola Solutions MSC-431 et passer le test à la première fois.

Le meilleur matériel de formation examen Motorola Solutions MSC-122

Les spécialiste profitant leurs expériences et connaissances font sortir les documentations particulière ciblées au test Motorola Solutions MSC-122 pour répondre une grande demande des candidats. Maintenant, la Q&A plus nouvelle, la version plus proche de test Motorola Solutions MSC-122 réel est lancée. C'est possible à réussir 100% avec le produit de Motorola Solutions MSC-122. Si malheureusement, vous ne passez pas le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit en Internet pour examiner la qualité de Q&A. N'hésitez plus d'ajouter le produit au panier, Pass4Test peut vous aider à réussir le rêve.

Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.

Pass4Test est un bon site d'offrir la facilité aux candidats de test Motorola Solutions MSC-122. Selon les anciens test, l'outil de formation Motorola Solutions MSC-122 est bien proche de test réel.

Code d'Examen: MSC-122
Nom d'Examen: Motorola Solutions (Deploy WLAN Solutions)
Questions et réponses: 113 Q&As

Le test Motorola Solutions MSC-122 peut bien examnier les connaissances et techniques professionnelles. Pass4Test est votre raccourci amené au succès de test Motorola Solutions MSC-122. Chez Pass4Test, vous n'avez pas besoin de dépenser trop de temps et d'argent juste pour préparer le test Motorola Solutions MSC-122. Travaillez avec l'outil formation de Pass4Test visé au test, il ne vous demande que 20 heures à préparer.

MSC-122 Démo gratuit à télécharger: http://www.pass4test.fr/MSC-122.html

NO.1 You have just conducted a throughput test using iPerf on a WLAN that shows a PHY signaling rate of 54
Mbps, however the average throughput rate shown in iPerf is only 23.5 Mbps. What is the most likely
explanation for this condition?
A. This throughput speed is considered nominal.
B. This throughput rate could indicate a mismatch between Wi-Fi confidentiality algorithms.
C. This throughput rate indicates excessive user activity.
D. This throughput rate indicates excessive out-of-band interference such as nearby cell phone towers.
Answer: A

Motorola Solutions examen   MSC-122 examen   MSC-122   MSC-122   MSC-122

NO.2 You have configured a Motorola RFS controller using WiNG 5 and have attempted to adopt a group of
APs using L2 adoption but the adoption is not successful. You have confirmed the following:
-All of the APs have an Ethernet connection to the same LAN segment as the controller -Spanning Tree
Protocol (STP) has been disabled on the APs next hop switch port -Intermediate firewalls are not blocking
EtherType 0x8783
Given this scenario, which of the following is the most likely cause of the unsuccessful AP adoption?
A. DHCP option 192 has not been defined on the DHCP server
B. A local VLAN has been configured on both the controller and the APs
C. The APs GE ports have been configured for an S02.1q-tagged native VLAN
D. The APs GE ports have been configured for an 802.1q-untagged native VLAN
Answer: C

Motorola Solutions   MSC-122   MSC-122   MSC-122   MSC-122   MSC-122

NO.3 Which of the following statements regarding the configuration of Motorola RFS controllers is TRUE?
A. ADSP can be used to push CLI profiles to APs and controllers.
B. LANPlanner can be used to push CLI profiles to APs and controllers.
C. RFMS can be used to perform predictive site surveys using an RFS controller
D. WiNG 5 can be used to perform manual site surveys using an RFs controller
E. CLI can be used to perform both manual and predictive site surveys using an RFS controller.
Answer: A

Motorola Solutions   MSC-122 examen   certification MSC-122

NO.4 Your customer has requested that during the upcoming 802.llg to 802.11n upgrade deployment you
enable 40 MHz channels on 1, 6, and 11 of the 2.4 GHz ISM band. You respond by saying that there is not
enough spectrum to allow 40 MHz channels centered on 1, 6, and 11. How wide are standard 802.11g
(OFDM) channels?
A. 20 MHz
B. 83.5 MHz
C. 5 MHz
D. 11 MHz
E. 22 MHz
Answer: A

Motorola Solutions examen   MSC-122   MSC-122   MSC-122 examen   MSC-122

NO.5 You are deploying a new WLAN within the WiNG 5 architecture. Which of the following is the only
UNSUPPORTED Motorola access point/port?
A. AP-300
B. AP-650
C. AP-5131
D. AP-7131
Answer: C

Motorola Solutions   MSC-122 examen   MSC-122 examen   MSC-122

NO.6 You have an access point that requires PoE connected to a switch with a 150 meter 10 BASE-T CAT 5
cable. During testing numerous problems with both data transmission and intermittent power occurs.
Which of the following is most likely the cause?
A. The cable should be CAT 6
B. There is a duplex mismatch
C. The cable should be 100 BASE-T
D. The cable is too long
Answer: D

Motorola Solutions   MSC-122 examen   MSC-122 examen

NO.7 You are performing a physical site survey of a new WiNG 5 WLAN deployment. Which of the following is
CORRECT?
A. The Signal to Noise Ratio (SNR) is a critical measurement that needs to be addressed.
B. It is acceptable that you use any RF infrastructure device (Access Point) to perform the site survey test.
C. Using default settings of a site survey application will provide an adequate site survey result.
D. Customer throughput requirements are the only criteria for which need to be surveyed.
Answer: B

Motorola Solutions   certification MSC-122   MSC-122

NO.8 You are designing a WLAN that will support multiple BSS IDs. One of the characteristics you need to
take into consideration is that each BSS transmits a beacon every 100 ms. How many BSSs can be
enabled on the following Motorola access points under WiNG 5: AP7131, AP650, AP6532?
A. 2, one per radio
B. 1 per AP, it is shared between the radios to provide seamless roaming
C. 8, four per radio
D. 16, eight per radio
Answer: D

certification Motorola Solutions   MSC-122   MSC-122   MSC-122

NO.9 Which of the following is the primary method of collision avoidance in an 802.11 CSMA/CA WLAN?
A. Backoff Timer
B. Carrier Sense
C. Contention Window
D. Enhanced Distributed Channel Access (EDCA)
E. Distributed Coordination Function Interframe Spaces (DIFS)
Answer: B

Motorola Solutions examen   MSC-122   MSC-122   certification MSC-122

NO.10 You are deploying a new system and are creating the RF Domain(s). Which of the following options
would you use to group the APs into the same domain?
A. By VLAN, where all APs are on the same subnet.
B. By site, which can be a location where the group of installed APs can hear each other's beacons.
C. By name, so they can be easily sorted in the tree view of the controller.
D. By deployment phase, so configurations can be accidentally pushed to newly installed APs.
Answer: A

Motorola Solutions   MSC-122 examen   MSC-122   MSC-122 examen   MSC-122

NO.11 Which of the following APs does not support adaptive mode?
A. AP7131
B. AP6532
C. AP650
D. AP6521
Answer: A

Motorola Solutions   MSC-122   MSC-122   MSC-122 examen   MSC-122   MSC-122 examen

NO.12 If a Motorola access point induces a 50 mW RF signal onto a 3 dBi antenna, what will be the resulting
EIRP of the transmitted signal?
A. 0 dBm
B. 3 dBm
C. 20 dBm
D. 50 mW
E. 50 dBm
Answer: C

Motorola Solutions   MSC-122   MSC-122   certification MSC-122   MSC-122   MSC-122

NO.13 Your customer has requested that you configure unique VLANs for voice, normal user data with
802.1X security, guest access, and management traffic. Which of the following VLAN modes can support
this request?
A. Native Mode
B. Access Mode
C. Trunk Mode
D. Aggregation Mode
E. Encapsulation Mode
Answer: C

certification Motorola Solutions   certification MSC-122   MSC-122   MSC-122   certification MSC-122

NO.14 Which of the following statements is NOT considered to be a best practice with respect to the wired
backbone serving the WLAN.?
A. When performing manual configuration of a point-to-point Ethernet link, ensure that both the speed and
the duplex mode settings on the two ports match.
B. When creating a link between Ethernet 10/100BASE-T or 10/100/1000BASE-T ports, enable (or accept
the default of) auto-negotiation on both ports.
C. When creating a link between Gigabit Ethernet fiber ports, enable (or accept the default of)
auto-negotiation.
D. When creating a link between Gigabit Ethernet fiber ports, disable auto-negotiation on both ports.
Answer: D

certification Motorola Solutions   certification MSC-122   MSC-122   MSC-122

NO.15 During a recent throughput analysis test of your 802.11g network, you discovered that performance is
poor in comparison to previous baselines. You discover that this is the result of 802.11b stations becoming
associated with your access point. What option could you implement to eliminate 802.lib clients from
attaching to your network?
A. Implement protection mechanisms
B. Make 24 mbps a required data rate
C. Implement RTS/CTS at the access point
D. Change the channel used for the network
Answer: B

certification Motorola Solutions   MSC-122 examen   MSC-122 examen

En quelques années, le test de certification de Motorola Solutions MSC-122 faisait un grand impact sur la vie quotidienne pour pas mal de gens. Voilà le problème, comme on peut réussir facilement le test de Motorola Solutions MSC-122? Notre Pass4Test peut vous aider à tout moment à résourdre ce problème rapidement. Pass4Test peut vous offrir une bonne formation particulière à propos du test de certification MSC-122. Notre outil de test formation est apporté par les IT experts. Chez Pass4Test, vous pouvez toujours trouver une formations à propos du test Certification MSC-122, plus nouvelle et plus proche d'un test réel. Tu choisis le Pass4Test aujourd'hui, tu choisis le succès de test Certification demain.