Si vous hésitez encore à nous choisir, vous pouvez tout d'abord télécharger le démo gratuit dans le site Pass4Test pour connaître mieux la fiabilité de Pass4Test. Nous avons la confiance à vous promettre que vous allez passer le test CompTIA PD1-001 à la première fois.
Le Certificat de CompTIA PD1-001 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat CompTIA PD1-001, c'est-à-dire avoir une grande fortune. Le Certificat CompTIA PD1-001 peut bien tester des connaissances professionnelles IT. La Q&A CompTIA PD1-001 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.
Code d'Examen: PD1-001
Nom d'Examen: CompTIA (CompTIA PDI+ Beta Exam)
Questions et réponses: 861 Q&As
Généralement, les experts n'arrêtent pas de rechercher les Q&As plus proches que test Certification. Les documentations offertes par les experts de Pass4Test peuvent vous aider à passer le test Certification. Les réponses de nos Q&As ont une précision 100%. C'est facile à obtenir le Certificat de CompTIA après d'utiliser la Q&A de Pass4Test. Vous aurez une space plus grande dans l'industrie IT.
On doit faire un bon choix pour passer le test CompTIA PD1-001. C'est une bonne affaire à choisir la Q&A de Pass4Test comme le guide d'étude, parce que vous allez obtenir la Certification CompTIA PD1-001 en dépensant d'un petit invertissement. D'ailleur, la mise à jour gratuite pendant un an est aussi gratuite pour vous. C'est vraiment un bon choix.
PD1-001 Démo gratuit à télécharger: http://www.pass4test.fr/PD1-001.html
NO.1 Which of the following components is part of the ink dispersion system?
A.Print Heads
B.Cleaning heads
C.Pickup Roller
D.Charge Assembly
Answer: A
CompTIA PD1-001 examen PD1-001 PD1-001 PD1-001
NO.2 An encoder sensor typically detects:
A.paper position.
B.shaft rotation.
C.magnetic flux.
D.laser beam strength.
Answer: B
CompTIA certification PD1-001 PD1-001 examen PD1-001
NO.3 When is it advisable to dump the waste toner from a technicians service vacuum?
A.When it is full.
B.It is not recommended.
C.Before performing preventative maintenance.
D.After each call.
Answer: B
CompTIA PD1-001 PD1-001 PD1-001 examen
NO.4 Which of the following is the purpose of a torque limiter in a roller?
A.To reduce wear and tear on rollers.
B.To provide resistance but still allow some slippage.
C.To limit the amount of movement by media.
D.To make it easier to replace rollers.
Answer: B
CompTIA PD1-001 PD1-001 examen certification PD1-001 certification PD1-001
NO.5 During the photoconductor preparation step, residual charge can be removed by which of the
following? (Select TWO).
A.Pressure
B.Oil
C.Light
D.Gravity
E.Electrical Charge
Answer: CE
CompTIA examen PD1-001 examen certification PD1-001
NO.6 Which of the following is a reason black toner is used in color printers?
A.It decreases the print speed in color laser printers.
B.It prevents moir patterns when printing color photographs.
C.It reduces the cost per page when printing gray scale documents.
D.It makes the color toner resistant to smudging when wet.
Answer: C
CompTIA examen PD1-001 examen PD1-001 PD1-001
NO.7 A polygon mirror is part of which of the following assemblies?
A.Laser unit
B.Developer unit
C.Charge assembly
D.Fuser assembly
Answer: A
certification CompTIA PD1-001 certification PD1-001 PD1-001 certification PD1-001
NO.8 Which of the following functions is associated with the developer unit?
A.Supplies toner to the photoconductor
B.Charges the surface of the photoconductor
C.Writes the latent image on the photoconductor
D.Cleans the photoconductor
Answer: A
certification CompTIA PD1-001 examen PD1-001 PD1-001 examen
NO.9 Which of the following utilities could be used to determine a subnet mask?
A.PING
B.NSLOOKUP
C.TRACERT
D.IPCONFIG
Answer: D
certification CompTIA PD1-001 PD1-001 PD1-001
NO.10 Which of the following stages in the laser print process attracts toner to the latent image on the
photoconductor?
A.Writing
B.Fusing
C.Development
D.Transfer
Answer: C
CompTIA certification PD1-001 PD1-001 examen certification PD1-001 PD1-001
NO.11 How many CCDs are located in a single pass duplex ADF?
A.One
B.2
C.3
D.4
Answer: B
CompTIA examen PD1-001 PD1-001 examen
NO.12 The proper safety guidelines for handling any device specific consumables can be found in which of
the following documentation?
A.Material Safety Data Sheets
B.Installation Guides
C.Consumer Reports
D.Devices Parts Catalog
Answer: A
CompTIA examen PD1-001 PD1-001
NO.13 A technician is troubleshooting a network connectivity issue on a MFD and would like to eliminate the
possibility of another device on the network having the same IP address. The technician should:
A.disconnect the MFD and ping the IP address.
B.disconnect the MFD and ping the subnet mask.
C.disconnect the MFD and ping the loopback address.
D.run the ipconfig command from the command prompt.
Answer: A
certification CompTIA PD1-001 examen PD1-001
NO.14 The polygon mirror is located in which of the following components?
A.Developer unit
B.Scanner unit
C.Fuser unit
D.Laser unit
Answer: D
CompTIA certification PD1-001 certification PD1-001 certification PD1-001
NO.15 The customer has a dedicated ink jet fax machine that is used to send and receive faxes only from the
corporate office. The user complains of streaks on the received faxes while the internal self-prints are fine.
Which of the following should a technician recommend?
A.Clean the scanner glass on the distant machine.
B.Clean the scanner glass on the local machine.
C.Clean the printer head on the local machine.
D.Call the telephone company to increase the line signal level.
Answer: A
CompTIA certification PD1-001 PD1-001 examen PD1-001 examen
NO.16 A customer has installed a new computer on their network. They can print to the printer but the option
for duplex printing is not available. All other computers have the option. Which of the following is the
cause of the problem?
A.The new computer is printing to the wrong IP address.
B.The new computer is using the wrong protocol.
C.The driver port is not setup correctly.
D.The option has not been selected on the driver.
Answer: D
CompTIA certification PD1-001 certification PD1-001 PD1-001 examen
NO.17 In which of the following sections of an MFP would a technician find a Xenon Lamp?
A.The paper feed section
B.The fuser section
C.The scanner section
D.The transfer section
Answer: C
CompTIA PD1-001 PD1-001 examen certification PD1-001 PD1-001 examen PD1-001 examen
NO.18 Using the CMYK color model, the color purple is produced by combining cyan and which other color?
A.Green
B.Magenta
C.Yellow
D.Black
Answer: B
CompTIA examen PD1-001 PD1-001 PD1-001 examen
NO.19 Which of the following would be the BEST process for the technician to follow when beginning to
diagnose a unit at a customers site?
A.Check the printers error log, and then inform the primary user what the issue is.
B.Go directly to the printer and investigate any issues that are found.
C.Investigate the printers status, then ask the primary user to write down what they think is wrong.
D.Gather information from the primary user, and then evaluate the printers condition.
Answer: D
CompTIA examen PD1-001 PD1-001 PD1-001
NO.20 A customer is concerned about excessive media jamming in their device. Which of the following is the
FIRST thing a technician should check?
A.Media feed rollers
B.Cassette drawers
C.Fusing section
D.Device log data
Answer: D
CompTIA PD1-001 PD1-001 PD1-001 PD1-001 examen
Pass4Test est un fournisseur de formation pour une courte terme, et Pass4Test peut vous assurer le succès de test CompTIA PD1-001. Si malheureusement, vous échouez le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit avant de choisir Pass4Test. Au moment là, vous serez confiant sur Pass4Test.
没有评论:
发表评论