On doit faire un bon choix pour passer le test IBM C2180-606. C'est une bonne affaire à choisir la Q&A de Pass4Test comme le guide d'étude, parce que vous allez obtenir la Certification IBM C2180-606 en dépensant d'un petit invertissement. D'ailleur, la mise à jour gratuite pendant un an est aussi gratuite pour vous. C'est vraiment un bon choix.
C'est sûr que le Certificat IBM P2170-016 puisse améliorer le lendemain de votre carrière. Parce que si vous pouvez passer le test IBM P2170-016, c'est une meilleure preuve de vos connaissances professionnelles et de votre bonne capacité à être qualifié d'un bon boulot. Le Certificat IBM P2170-016 peut bien tester la professionnalité de IT.
Le guide d'étude sorti de Pass4Test comprend les expériences résumées par nos experts, les matériaux et les Q&As à propos de test Certification IBM C2180-606. Notre bonne réputation dans l'industrie IT sera une assurance 100% à réussir le test IBM C2180-606. Afin de vous permettre de choisir Pass4Test, vous pouvez télécharger gratuitement le démo de Q&A tout d'abord.
Code d'Examen: C2180-606
Nom d'Examen: IBM (IBM WebSphere Business Modeler Advanced Edition V7.0, Business Analysis and Design)
Questions et réponses: 110 Q&As
Code d'Examen: P2170-016
Nom d'Examen: IBM (IBM IOC Intelligent Transportation Technical Mastery Test v1 )
Questions et réponses: 30 Q&As
Dans cette société de l'information technologies, c'est bien populaire que l'on prenne la formation en Internet, Pass4Test est l'un des sites d'offrir la formation particulère pour le test IBM P2170-016. Pass4Test a une expérience riche pour répondre les demandes des candidats.
Le suucès n'est pas loin de vous une fois que vous choisissez le produit de Q&A IBM P2170-016 de Pass4Test.
Le guide d'étude de Pas4Test comprend l'outil de se former et même que le test de simulation très proche de test réel. Pass4Test vous permet de se forcer les connaissances professionnelles ciblées à l'examen Certification IBM C2180-606. Il n'y a pas de soucis à réussir le test avec une haute note.
Vous pouvez comparer un peu les Q&As dans les autres sites web que lesquelles de Pass4Test, c'est pas difficile à trouver que la Q&A IBM P2170-016 est plus complète. Vous pouvez télécharger le démo gratuit à prendre un essai de la qualité de Pass4Test. La raison de la grande couverture des questions et la haute qualité des réponses vient de l'expérience riche et la connaissances professionnelles des experts de Pass4Test. La nouvelle Q&A de IBM P2170-016 lancée par l'équipe de Pass4Test sont bien populaire par les candidats.
C2180-606 Démo gratuit à télécharger: http://www.pass4test.fr/C2180-606.html
NO.1 During an exception period, a resource could not complete a task before the end of the task's
processing time. What should be done to ensure that the resource remains allocated until the task is
completed?
A. Check "Use resources time required as a task processing time".
B. Check the preference "Run simula-tion without resource requirements".
C. Increase the "Task duration" to match the resource required time.
D. Set the task's "Resource wait time" to be the resource shortage time.
Answer: A
IBM C2180-606 C2180-606 examen C2180-606 examen C2180-606
NO.2 Which steps would a process analyst take when conducting a simu-lation of "what-if" scenarios for a
business process instance?
A. Make a copy of the simula-tion snapshot, rename it, change the attributes for the "what-if" scenario and
re-run the simula-tion and analyze the results
B. Make a copy of the simula-tion profile, rename it, change the simula-tion attributes for the "what-if"
scenario and re-run the simula-tion and analyze the results.
C. Right click on the simula-tion profile, select Profile Analysis > New Profile and change the attributes for
the "what-if" scenario and then re-run the simula-tion and analyze results
D. Right click on the simula-tion snapshot, select Profile Analysis > Profile Specification, and change the
attributes for the "what-if" scenario and then re-run the simula-tion and analyze results.
Answer: B
IBM examen C2180-606 examen C2180-606 examen certification C2180-606
NO.3 A process analyst needs to conduct analysis on cost and duration of marketing related tasks in the
current process. In the current process, there are five possible paths. The process analyst needs to
identify the cost and duration of marketing related tasks for each path. The process analyst has decided
to create a classifier of Marketing to be assigned to the tasks in the current process. Which analysis
should be used?
A. Activities by classifier analysis.
B. Classifier cost and duration analysis.
C. Process case summary analysis.
D. Process classifier cost and duration analysis.
Answer: D
IBM examen C2180-606 certification C2180-606 C2180-606 examen
NO.4 A model is going to be simu-lated to capture results that represent as close to real conditions as
possible. What simu-lation setting should be used to ensure that the results reflect the random nature of
the process? The random number seed needs to be set to:
A. Zero
B. 1
C. 2
D. N
Answer: A
certification IBM certification C2180-606 C2180-606 examen
NO.5 A process analyst has performed simu-lation upon a business process and is analyzing resource
allocation within the process. The average elapsed duration for the process is 2 hours, 57 minutes. After
running the Process Resource Dynamic Analysis Report, it is observed that the Field Tech Resource has
an average Quantity Allocated value of .6 units. The Process Resource Allocation Dynamic Analysis
Report is also generated against the simu-lation results, and it is determined that there is an Average
Shortage Duration of 37 minutes, 30 seconds for the resource. The process analyst also observes that
the Field Tech Resource has been defined to the process as a bulk resource with an availability value of 3.
Based on this information, what conclusions can the process analyst draw?
A. There is at least one case in the business process that does not allocate the Field Tech Resource. The
pool of available Field Tech Resources can be reduced to 1 to eliminate resources that are never
allocated to the process. This will not affect the Average Shortage Duration value.
B. There are too many Field Tech Resources available to the process, as the sum of all Field Tech
Resource allocations to activities in the process divided by the total number of process instances is less
than one. This indicates that some Field Tech Resources are never allocated the business process.
C. There is at least one case in the business process that does not allocate the Field Tech Resource,
however there are also multiple concurrent process instances that are allocating the resource
concurrently and are competing for the resource. The pool of available Field Tech Resources can be
increased to reduce the Average Shortage Duration and the Average Quantity Allocated would increase to
a value close to 1.0 units.
D. There is at least one case in the business process that does not allocate the Field Tech Resource,
however there are also multiple concurrent process instances that are allocating the resource
concurrently and are competing for the resource. The pool of available Field Tech Resources can be
increased to reduce the Average Shortage Duration and the Average Quantity Allocated would remain the
same in subsequent simula-tions.
Answer: D
IBM examen C2180-606 examen certification C2180-606 certification C2180-606
NO.6 When reviewing the simu-lations results, the process analyst discovered that for each task in the
process that has multiple output criteria, the simula-tion engine would make a random selection of an
output path, and generate outgoing tokens for each output defined in the output criterion. Which of the
following settings was used during the simula-tion?
A. Randomly to a single path.
B. Based on an expression.
C. Based on probabilities to a single path.
D. Based on probabilities to multiple paths.
Answer: C
IBM C2180-606 certification C2180-606 C2180-606 examen
NO.7 A process analyst is simulating a process and the results indicate excessive wait times at some of the
activities. Which static analysis report would be useful in determining the cause of the excessive wait
times?
A. Activities by organization
B. Activity cost and duration
C. Activity resource and role leveling
D. Qualified resources for role
Answer: C
certification IBM C2180-606 C2180-606 examen C2180-606 examen
NO.8 A process analyst has completed a process model and is required to validate it. One of the validations is
to ensure that there are no potential situations where a sequence of activities can be repeated indefinitely.
Using Static Analysis, how can the process analyst quickly validate that there are no sequence of tasks
that can potentially loop endlessly.?
A. 1. Run the Path Cycles Report.
2. Identify the cycle name assigned to each path cycle in the process and correlate that back to the
process model.
B. 1. Run the Activity Throughput Report.
2. Identify the throughput of all activities that deliver more outputs per hour than anticipated.
C. 1. Run the Activities Unable to Start Report.
2. Identify any activities that were not able to be invoked within the process, locate the preceding
construct that connects a downstream activity's output to an upstream activity's input.
D. 1. Run the Paths Unable to be Followed Report.
2. Identify any paths that were not able to be invoked within the process, and locate the preceding
construct that connects a downstream activity's output to an upstream activity's input.
Answer: A
IBM examen C2180-606 examen certification C2180-606 C2180-606 examen
没有评论:
发表评论