Le Certificat de BICSI RCDD signifie aussi un nouveau jalon de la carrière, le travail aura une space plus grande à augmenter, et tout le monde dans l'industrie IT sont désireux de l'obtenir. En face d'une grande passion pour le test Certification BICSI RCDD, le contrariété est le taux très faible à réussir. Bien sûr que l'on ne passe pas le test RCDD sans aucun éffort, en même temps, le test de BICSI RCDD demande les connaissances bien professionnelles. Le guide d'étude dans le site Pass4Test peut vous fournir un raccourci à réussir le test BICSI RCDD et à obtenir le Certificat de ce test. Choisissez le guide d'étude de Pass4Test, vous verrez moins de temps dépensés, moins d'efforts contribués, mais plus de chances à réussir le test. Ça c'est une solution bien rentable pour vous.
Pass4Test est un fournisseur de formation pour une courte terme, et Pass4Test peut vous assurer le succès de test BICSI RCDD. Si malheureusement, vous échouez le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit avant de choisir Pass4Test. Au moment là, vous serez confiant sur Pass4Test.
Code d'Examen: RCDD
Nom d'Examen: BICSI (Registered Communications Distribution Designer )
Questions et réponses: 106 Q&As
Le test Certificat BICSI RCDD est bien populaire pendant les professionnels IT. Ce Certificat est une bonne preuve de connaissances et techniques professionnelles. C'est une bonne affaire d'acheter une Q&A de qualité coûtant un peu d'argent. Le produit de Pass4Test vise au test Certification BICSI RCDD. Vous allez prendre toutes essences du test BICSI RCDD dans une courte terme.
Votre vie changera beaucoup après d'obtenir le Certificat de BICSI RCDD. Tout va améliorer, la vie, le boulot, etc. Après tout, BICSI RCDD est un test très important dans la série de test Certification BICSI. Mais c'est pas facile à réussir le test BICSI RCDD.
Vous pouvez s'exercer en Internet avec le démo gratuit. Vous allez découvrir que la Q&A de Pass4Test est laquelle le plus complète. C'est ce que vous voulez.
RCDD Démo gratuit à télécharger: http://www.pass4test.fr/RCDD.html
NO.1 Which of the following is the standard for "Recommended Practice for Installation
Design and Installation of Valve Regulated Lead-Acid Storage Batteries for
Stationary Applications"?
A. ANSI/IEEE C62.41
B. ANSI/IEEE C62.45
C. ANSI/IEEE P1188-1996
D. ANSI/IEEE P1187-1996
Answer: D
certification BICSI certification RCDD RCDD examen certification RCDD
NO.2 A "wye" is a power system in which only one point is grounded.
A. False
B. True
Answer: B
BICSI RCDD examen RCDD examen RCDD
NO.3 The inadvertent transposition of two conductors of separate pairs is called what?
A. Twisted pair
B. Transposed pairs
C. Reversed pair
D. Split pair
Answer: D
BICSI RCDD RCDD RCDD examen RCDD
NO.4 Which of the following is the Cable Modem (Cable-TV) Working Group?
A. IEEE 802.9
B. IEEE 802.11
C. IEEE 802.14
D. IEEE 802.3
Answer: C
BICSI RCDD examen certification RCDD certification RCDD
NO.5 In buildings that will contain the telecommunications systems, NEC requirements
address the adequate electrical environment for reliable and error-free operation of
the installed equipment.
A. False
B. True
Answer: A
BICSI examen RCDD RCDD certification RCDD RCDD examen RCDD examen
NO.6 NRZ is the acronym for which of the following?
A. Non-return to zero.
B. Nominal return zone.
C. Network registration zone.
D. Normal return zone.
Answer: A
BICSI RCDD certification RCDD
NO.7 Which of the following is the international standard for premises cabling?
A. ISO/IEC 18010
B. ISO/IEC 11801
Answer: B
BICSI RCDD RCDD RCDD RCDD examen RCDD examen
NO.8 What is the standard floor space allocation used in an office environment for one
individual work area?
A. 100 square feet.
B. 50 square feet.
C. 150 square feet.
D. 75 square feet.
Answer: A
BICSI RCDD examen RCDD RCDD
NO.9 ANSI/TIA/EIA-758 is the standard for which of the following?
A. Customer-Owned Outside Plant Telecommunications Cabling Standard.
B. Technical Specifications for 100 Ohm Screened Twisted Pair Cabling.
C. Propagation Delay and Delay Skew Specifications for 100-Ohm 4-Pair Cable.
D. Residential Telecommunications Cabling Standard.
Answer: A
BICSI RCDD RCDD RCDD certification RCDD
NO.10 Between the late 60's and until 1984, what was the service that was to help architects
and engineers better design and implement pathways and spaces in commercial
buildings for telephone communications?
A. BICS
B. AT&T
C. CREDFACS
D. GTE
E. BICSI
Answer: A
BICSI RCDD RCDD examen
NO.11 Which of the following is the Standard for the Installation of Lightning Protection
Systems?
A. NFPA-780
B. NFPA-70
C. NFPA-72
D. NFPA-75
Answer: A
BICSI RCDD RCDD
NO.12 A product is listed after it successfully completes a series of which of the following
test?
A. Mechanical
B. Regulatory codes
C. Electrical
D. Thermal
Answer: ACD
BICSI RCDD RCDD RCDD examen
NO.13 In an "underfloor duct system", the distribution ducts carry cables from the TR to
the feeder ducts.
A. False
B. True
Answer: A
BICSI RCDD examen RCDD RCDD
NO.14 For design purposes, which of the following would be the typical size range of a
4-pair 100 ohm UTP or ScTP (FTP) cable?
A. .50 in to .75 in
B. .14 in to .25 in
C. .31 in to .43 in
D. .11 in to .18 in
Answer: B
BICSI RCDD RCDD RCDD RCDD
NO.15 Distribution cable is that part of the loop that connects the customer location to the
customer feeder cable.
A. True
B. False
Answer: A
certification BICSI RCDD certification RCDD RCDD RCDD examen certification RCDD
NO.16 The ability of a device, equipment, or system to perform without degradation in the
presence of an electromagnetic disturbance is called what?
A. Electromagnetic immunity.
B. Electromagnetic compatibility.
C. Electromagnetic induction.
D. Electromagnetic disturbance.
Answer: A
BICSI examen RCDD RCDD RCDD examen RCDD
NO.17 ________is the total opposition (resistance, capacitance, and inductance) a circuit,
cable, or component offers to the flow of alternating current.
A unit of measure expressed in ohms.
Answer: Impedance
BICSI RCDD RCDD certification RCDD
NO.18 Which of the following should be used as a guideline for estimating space
requirements of optical fiber and coaxial cable cross-connections in a TR?
A. 3 sq. in. for each fiber pair to be patched or cross-connected.
B. 2 sq. in. for each fiber pair to be patched or cross-connected.
C. 4 sq. in. for each fiber pair to be patched or cross-connected.
D. 1 sq. in. for each fiber pair to be patched or cross-connected.
Answer: B
BICSI examen RCDD examen RCDD examen RCDD RCDD
NO.19 In what year was the TIA formed?
A. 1985
B. 1965
C. 1958
D. 1956
Answer: A
BICSI RCDD RCDD examen RCDD RCDD RCDD
NO.20 The CEC is revised every four years.
A. True
B. False
Answer: A
BICSI RCDD examen certification RCDD
没有评论:
发表评论