Le succès n'est pas loin de vous si vous choisissez Pass4Test. Vous allez obtenir le Certificat de Juniper JN0-730 très tôt. Pass4Test peut vous permettre à réussir 100% le test Juniper JN0-730, de plus, un an de service en ligne après vendre est aussi gratuit pour vous.
Certification Juniper JN0-730 est un des tests plus importants dans le système de Certification Juniper. Les experts de Pass4Test profitent leurs expériences et connaissances professionnelles à rechercher les guides d'étude à aider les candidats du test Juniper JN0-730 à réussir le test. Les Q&As offertes par Pass4Test vous assurent 100% à passer le test. D'ailleurs, la mise à jour pendant un an est gratuite.
Dans cette société de l'information technologies, c'est bien populaire que l'on prenne la formation en Internet, Pass4Test est l'un des sites d'offrir la formation particulère pour le test Juniper JN0-730. Pass4Test a une expérience riche pour répondre les demandes des candidats.
Beaucoup de gens trouvent difficile à passer le test Juniper JN0-730, c'est juste parce que ils n'ont pas bien choisi une bonne Q&A. Vous penserez que le test Juniper JN0-730 n'est pas du tout autant dur que l'imaginer. Le produit de Pass4Test non seulement comprend les Q&As qui sont impressionnées par sa grande couverture des Questions, mais aussi le service en ligne et le service après vendre.
Code d'Examen: JN0-730
Nom d'Examen: Juniper (DX, Specialist (JNCIS-DX))
Questions et réponses: 270 Q&As
Votre vie changera beaucoup après d'obtenir le Certificat de Juniper JN0-730. Tout va améliorer, la vie, le boulot, etc. Après tout, Juniper JN0-730 est un test très important dans la série de test Certification Juniper. Mais c'est pas facile à réussir le test Juniper JN0-730.
JN0-730 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-730.html
NO.1 In the packet forwarding decision process, how is the second packet handled differently than
the first in a series of allowed interzone packets?
A. The second packet causes an ARP query.
B. The second packet is checked against the policy table.
C. The second packet is forwarded without a sanity check.
D. The second packet is forwarded without checking the route table.
Answer: D
Juniper certification JN0-730 JN0-730 JN0-730 certification JN0-730
NO.2 When is NAT used?
A. for Layer 2 switching
B. for MPLS VPNs
C. to translate between IP addresses
D. for secure tunnels
Answer: B
Juniper examen JN0-730 JN0-730 certification JN0-730
NO.3 By default, from which hardware component is the startup copy of the ScreenOS loaded?
A. NVRAM
B. TFTP server
C. internal flash
D. PCMCIA card
Answer: C
certification Juniper JN0-730 certification JN0-730 JN0-730 examen JN0-730 examen JN0-730 examen
NO.4 What is the initial default username and password for all ScreenOS devices?
A. administrator/password
B. root/password
C. netscreen/netscreen
D. admin/netscreen1
Answer: D
Juniper JN0-730 JN0-730
NO.5 What is a zone used for?
A. to bundle interfaces together for redundancy
B. to bundle interfaces sharing identical security requirements
C. to provide a tunneled connection across a network
D. to protect against spam attacks
Answer: D
certification Juniper certification JN0-730 JN0-730
NO.6 Using the CLI, if the startup copy of the ScreenOS on a NS-204 is corrupted, from which two (2)
alternate locations can an image be loaded?
A. ROM
B. TFTP server
C. Internal Flash
D. PCMCIA Card
E. Compact Flash Card
Answer: B,E
Juniper JN0-730 JN0-730 examen JN0-730 examen JN0-730 certification JN0-730
NO.7 In the flow decision process, the system has found a route entry matching the packet
destination IP .
Which pair will identify the policy that is applied to this packet?
A. source and destination MAC
B. source and destination interface
C. source and destination TCP port
D. source and destination IP address
Answer: B
Juniper JN0-730 certification JN0-730 JN0-730 examen JN0-730 examen
NO.8 Which two devices run ScreenOS software? (Choose two.)
A. NetScreen-5200
B. NetScreen-5400
C. SRX240
D. MX480
Answer: C,D
certification Juniper JN0-730 JN0-730 examen
NO.9 In the packet flow decision process, which pair identifies interzone traffic?
A. source and destination MAC
B. source and destination interface
C. source and destination TCP port
D. source and destination IP address
Answer: B
Juniper certification JN0-730 JN0-730 examen JN0-730
NO.10 Which operating system is used on a NetScreen device?
A. IOS
B. Junos
C. FreeBSD
D. ScreenOS
Answer: A
Juniper JN0-730 JN0-730
NO.11 By default, from which hardware component is the startup copy of the ScreenOS loaded?
A. ROM
B. NVRAM
C. TFTP server
D. Internal Flash
E. PCMCIA Card
Answer: D
Juniper JN0-730 examen JN0-730 examen
NO.12 When a firewall receives the first packet in a series, what will it immediately do?
A. Check its route table.
B. Check its session table.
C. Determine if traffic is crossing zones.
D. Verify that it is not malformed or a fragment.
Answer: D
Juniper JN0-730 JN0-730
NO.13 Which security feature provides secure tunnels across a public network?
A. dynamic routing
B. Web filtering
C. IPsec
D. firewall filters
Answer: A
Juniper JN0-730 examen JN0-730 JN0-730
NO.14 A ScreenOS firewall has one interface in the user zone and one interface in the servers zone.
Both interfaces are addressed and active.
The configured policy allows user traffic from the user zone to the FTP server in the servers zone,
but the traffic does not cross the firewall from the client to the server.
What is the most likely problem with the firewall?
A. The ScreenOS firewall has no physical connection to the FTP server.
B. The ALG option on the ScreenOS firewall has not been enabled for FTP traffic.
C. The ScreenOS firewall does not have a route defined to the FTP server's subnet.
D. The ScreenOS firewall does not have a route defined to the FTP client's subnet.
Answer: C
Juniper examen JN0-730 JN0-730 examen certification JN0-730
NO.15 Using the CLI, if the startup copy of the ScreenOS is corrupted, from which location can an
image be loaded?
A. TFTP server
B. internal flash
C. PCMCIA card
D. Compact Flash Card
Answer: A
Juniper examen JN0-730 examen JN0-730
Dans n'importe quelle industrie, tout le monde espère une meilleure occasion de se promouvoir, surtout dans l'industrie de IT. Les professionnelles dans l'industrie IT ont envie d'une plus grande space de se développer. Le Certificat Juniper JN0-730 peut réaliser ce rêve. Et Pass4Test peut vous aider à réussir le test Juniper JN0-730.
没有评论:
发表评论