Pass4Test est un seul site de provider le guide d'étude HP HP0-S32 de qualité. Peut-être que vous voyiez aussi les Q&A HP HP0-S32 dans autres sites, mais vous allez découvrir laquelle est plus complète. En fait, Pass4Test est aussi une resource de Q&A pour les autres site web.
Pass4Test est un fournisseur de formation pour une courte terme, et Pass4Test peut vous assurer le succès de test HP HP0-S32. Si malheureusement, vous échouez le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit avant de choisir Pass4Test. Au moment là, vous serez confiant sur Pass4Test.
Dans cette société, il y a plein de gens talentueux, surtout les professionnels de l'informatique. Beaucoup de gens IT se battent dans ce domaine pour améliorer l'état de la carrière. Le test HP0-S32 est lequel très important dans les tests de Certification HP. Pour être qualifié de HP, on doit obtenir le passport de test HP HP0-S32.
Aujoud'hui, dans cette indutrie IT de plus en plus concurrentiel, le Certificat de HP HP0-S32 peut bien prouver que vous avez une bonne concurrence et une space professionnelle plus grande à atteindre. Dans le site Pass4Test, vous pouvez trouver un outil de se former très pratique. Nos IT experts vous offrent les Q&As précises et détaillées pour faciliter votre cours de préparer le test HP HP0-S32 qui vous amenera le succès du test HP HP0-S32, au lieu de traivailler avec peine et sans résultat.
Pass4Test possède une grande équipe composée des experts IT qui travaillent dur avec leurs riches expériences et connaissances pour produire un bon outil de formation. Selon les anciens test, le test simulation de Pass4Test est bien lié avec le test réel. Pass4Test peut vous assurer à réussir le test. Maintenant vous ajoutez votre outil de formation au panier, et votre rêve réalisera bien tôt.
Code d'Examen: HP0-S32
Nom d'Examen: HP (HP BladeSystem Networking 2011)
Questions et réponses: 136 Q&As
HP0-S32 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-S32.html
NO.1 Which spanning tree protocol is the most appropriate in a VLAN-aware, non-proprietary network
implementation?
A. RSTP
B. PVST+
C. MSTP
D. STP
Answer: C
HP certification HP0-S32 HP0-S32 examen
NO.2 What is considered a trunk in a Cisco switching environment?
A. aggregated switch links
B. tagged VLAN port (802.1Q)
C. tagged VLAN port plus link aggregation
D. Shared Uplink Set plus Connection Mode Auto
Answer: B
certification HP HP0-S32 HP0-S32 examen HP0-S32 examen HP0-S32
NO.3 Which statements are true about port VLAN memberships? (Select three.)
A. A port can be an untagged member of multiple VLANs.
B. A port must be a member of at least one VLAN.
C. A port must be a tagged member of only one VLAN.
D. A port can be an untagged member of only one VLAN.
E. A port can be a tagged member of multiple VLANs.
F. A port can be a tagged member of one VLAN and an untagged member of multiple VLANs.
Answer: B, D, E
HP HP0-S32 examen HP0-S32
NO.4 In a switching environment with redundant links, which technology is required for proper operation?
A. VLANs
B. Cisco vPC
C. loop prevention
D. dynamic routing
Answer: C
HP examen HP0-S32 HP0-S32 examen HP0-S32 HP0-S32 examen
NO.5 The IEEE 802.1AX (802.3ad) Link Aggregation Control Protocol is a Layer 2 protocol. What is its
function?
A. dynamically identifies link speeds regardless of media type
B. forms port trunks consisting of two or more uplink ports
C. identifies the VLAN to which frames transmitted on a link or port trunk belong
D. advertises information that describes and identifies devices
Answer: B
HP HP0-S32 certification HP0-S32 certification HP0-S32
NO.6 Which tasks are used to define a vNet for Virtual Connect Ethernet? (Select three.)
A. Assign only one network per server NIC.
B. Assign one or multiple networks per server NIC.
C. Optionally set the native VLAN.
D. Define the server profile.
E. Specify VLAN names/IDs.
F. Select unassigned uplinks.
Answer: A, D, F
HP certification HP0-S32 HP0-S32 HP0-S32
NO.7 What are valid FlexNIC bandwidth selections? (Select three.)
A. Preferred
B. Assigned
C. Static
D. Custom
E. Dynamic
F. Auto
Answer: A, D, F
HP examen HP0-S32 examen HP0-S32 HP0-S32 examen certification HP0-S32 HP0-S32
NO.8 Which port is the lowest-cost path to the spanning tree root bridge?
A. root port
B. defined root port
C. designated port
D. forwarding port
Answer: A
HP certification HP0-S32 HP0-S32 examen HP0-S32 examen
NO.9 What are the requirements for link aggregation using LACP? (Select three.)
A. Links must have the same tagged VLANs assigned.
B. Links must be the same speed.
C. Links must use the same media type.
D. Links must share a boundary.
E. Links must be full-duplex.
F. Links must be fiber connections.
Answer: B, D, E
HP HP0-S32 examen HP0-S32
NO.10 What does N_Port ID virtualization do?
A. provides an abstraction layer between the server HBAs and the SAN
B. provides interoperability among third-party SAN device manufacturers
C. provides connectivity between the Virtual Connect module and the Onboard Administrator
D. enables a single HBA port to register multiple, unique WWNs within a fabric
Answer: D
HP HP0-S32 HP0-S32
NO.11 What is used to achieve Fibre Channel data transfer?
A. channel mesh
B. packets
C. tunnels
D. frames
Answer: D
certification HP HP0-S32 HP0-S32 examen
NO.12 What are valid reasons for implementing VLANs? (Select two.)
A. to segregate traffic by resource or application needs
B. to provide enhanced name resolution
C. to reduce subnet cost options
D. to minimize the effect of broadcast traffic on hosts
E. to support multipathing
Answer: A, D
HP examen certification HP0-S32 HP0-S32 certification HP0-S32 certification HP0-S32
NO.13 What is considered a Virtual Connect domain in Virtual Connect Enterprise Manager?
A. a maximum of 1,000 enclosures
B. a maximum of 16,000 servers
C. from 1 to 4 enclosures
D. 250 Virtual Connect Manager domains
Answer: C
HP examen HP0-S32 HP0-S32 examen HP0-S32 examen
NO.14 You are configuring Virtual Connect Flex-10 10Gb Ethernet modules with Flex-10 server adapters.
What is an important network design consideration?
A. The Virtual Connect Flex-10 10Gb Ethernet module does not enforce VLAN isolation between
FlexNICs of the same server LAN on Motherboard (LOM).
B. If the Flex-10 server adapters are implemented as mezzanine cards, the Virtual Connect Flex-10 10Gb
Ethernet module requires all FlexNICs be configured for the same speed.
C. The Virtual Connect Manager will enforce physical port isolation by not allowing FlexNICs of the same
server port to connect to the same Virtual Connect network.
D. LACP trunking is not allowed between Virtual Connect uplink ports and infrastructure switch ports
located on different modules, even if within the same physical switch.
Answer: C
certification HP certification HP0-S32 certification HP0-S32 HP0-S32
NO.15 Which industry-standard protocols are supported on Virtual Connect Ethernet uplinks? (Select three.)
A. IEEE 802.1 AX (802.3ad) Link Layer Discovery Protocol (LLDP)
B. IEEE 802.1w-2001 Rapid Spanning Tree (RSTP)
C. IEEE 802.1p Quality of Service (QoS)
D. IEEE 802.1 AX (802.3ad) Link Aggregation Protocol
E. IEEE 802.1Q VLAN tagging
F. IEEE 802.3af-2003 Power over Ethernet (PoE)
Answer: A, D, E
HP HP0-S32 examen HP0-S32
NO.16 What are Virtual Connect Enterprise Manager features? (Select three.)
A. is licensed per enclosure
B. is licensed with the Virtual Connect Ethernet module
C. is embedded on the Virtual Connect Ethernet module
D. can administer up to 256,000 network addresses
E. can manage a single domain of up to four enclosures
F. can administer up to 16,000 servers
Answer: A, D, F
HP HP0-S32 examen certification HP0-S32 HP0-S32
NO.17 How can a tagged packet be processed for QoS when it is received on an inbound interface? (Select
three.)
A. The marked priority level can be changed to enforce predetermined classification levels.
B. The packet can be scheduled for a queue based on the marked 802.1p priority level.
C. The packet can be moved to a more secure VLAN and its priority remarked.
D. The packet can be scheduled for a queue based on a preset policy.
E. The packet can be discarded or rerouted if it does not match a set policy.
F. The packet can be prevented switch traversal for a predetermined penalty period.
Answer: A, B, D
HP examen HP0-S32 examen certification HP0-S32 HP0-S32 examen certification HP0-S32
NO.18 On a Cisco switch, what does the portfast setting do?
A. eliminates auto-negotiation delays with 10GbE ports
B. ensures the link is at maximum speed regardless of configuration
C. causes BPDUs to be blocked if sensed
D. eliminates delays inherent in RSTP/MSTP synchronization
Answer: D
HP examen HP0-S32 HP0-S32 HP0-S32 certification HP0-S32
NO.19 Which is a unique feature of a virtual switch?
A. port mirroring for packet analysis
B. VLAN segmentation at the port level
C. no packet forwarding (routing) between VLANs
D. maximum of 1016 ports per switch
Answer: D
HP examen HP0-S32 HP0-S32 HP0-S32 examen
NO.20 What does trunk refer to in industry-standard terminology?
A. aggregated switch links
B. tagged VLAN port (802.1Q)
C. tagged VLAN port plus link aggregation
D. Shared Uplink Set plus Connection Mode Auto
Answer: A
HP certification HP0-S32 certification HP0-S32 HP0-S32 examen HP0-S32
Pass4Test est un site professionnel qui répondre les demandes de beaucoup clients. Les candidats qui ont déjà passer leurs premiers test Certification IT ont devenus les suivis de Pass4Test. Grâce à la bonne qualité des documentations, Pass4Test peut aider tous candidats à réussir le test HP HP0-S32.
没有评论:
发表评论